Alternatives to UniSim Operations Suite

Azore is software for computational fluid dynamics. It analyzes fluid flow and heat transfers. CFD allows engineers and scientists to analyze a wide range of fluid mechanics problems, thermal and chemical problems numerically using a computer. Azore can simulate a wide range of fluid dynamics situations, including air, liquids, gases, and particulate-laden flow. Azore is commonly used to model the flow of liquids through a piping or evaluate water velocity profiles around submerged items. Azore can also analyze the flow of gases or air, such as simulating ambient air velocity profiles as they pass around buildings, or investigating the flow, heat transfer, and mechanical equipment inside a room. Azore CFD is able to simulate virtually any incompressible fluid flow model. This includes problems involving conjugate heat transfer, species transport, and steady-state or transient fluid flows.

Ansys MotorCAD is a dedicated tool for electric machine design. It allows you to quickly simulate multiphysics across the entire torque-speed operating range. Motor-CAD allows engineers to evaluate motor topologies across the entire operating range. This allows them to create designs that are optimized for size, efficiency, and performance. Motor-CAD software's four modules, Emag, Therm Lab, Mech, allow multiphysics calculations to be performed quickly, iteratively, and users can move from concept to final design in a shorter time. Motor-CAD users can explore more motor topologies and fully evaluate the impact of advanced loss effects during the initial stages of an electrical mechanical design with Motor-CAD's streamlined data input process. This release features powerful new features for design optimization and multi-physics analysis, as well as system modeling for electric motors. Multiphysics simulations are fast across the entire torque-speed range.

Mimic Simulation Software allows for dynamic simulation that simulates plant behavior in real-time. Mimic is designed for process automation experts and not simulation specialists. It seamlessly integrates with DeltaV and other offline control systems. You can use the exact same operator graphics, controls and controls to train new or inexperienced operators. Mimic™, Simulation Software allows for accurate simulations of plant behavior in real-time. Mimic is designed for the end-user, integrator, or anyone with process automation experience. It can be integrated easily and automatically with your existing off-line control system. You can use the same operator graphics to train operators or test configuration.

Training managers are responsible for ensuring that control room management (CRM), their pipelines, and new pipeline controllers, operate safely. They also ensure that their training program is compliant with industry regulations. The AVEVA Pipeline Simulator allows pipeline controllers to practice on normal and unusual operating scenarios in a safe, realistic environment. This method fosters knowledge capture, transfer, safety, risk reduction, and ultimately improves availability and reliability. The more complicated a pipeline is, the more difficult it becomes to manage problems that drain bottom line and expose companies to regulatory scrutiny and painful publicity. Leading pipeline operators know that a good offense is better than a bad defense. High-skilled pipeline controllers are available to implement these measures.

Integrated engineering workflows are essential to bring products to market faster and maintain high quality while minimizing changeover and start-up time. SIMIT Simulation Platform allows automation applications to be tested and provides operators with a realistic training environment - even before plant startup. SIMIT allows for process optimization and knowledge retention, which leads to a shorter time-to-market and reduced commissioning times. You will see greater efficiency throughout the life cycle of your manufacturing and process plant. SIMIT allows for comprehensive testing of automation projects and virtual commissioning of machines, systems, and processes from a single platform. Simulator platforms also provide realistic training environments for operating personnel.

The world is constantly changing. Every day brings new opportunities, technologies, and challenges. How can you keep up with these changes? How can we make our world more efficient, sustainable, and safe? Understanding the impact of our actions and the decisions that we make is key. How can we design, optimize, manage and manage our cities, critical infrastructures and supply chains? These challenges are solved by InControl software in every phase of its life cycle. Transform data into reliable and predictive analytics to understand complex infrastructures. Your clients, partners, and stakeholders can share the results and insights from complex and unpredictable environments. These include time, costs and resources, productivity, reliability safety, sustainability, and safety. Simulation Software allows you to evaluate your future and potential resource investments. Streamline and integrate processes to reduce time, effort, and costs.

Corporate trainers and professors at business schools rate dynamic simulations as the best method of experiential learning. Our simulations have been proven to be useful in revealing the connections between strategy, operating decisions, and performance outcomes. The simulation can also be used as a practice area for improving skills in observing, assessing, and engaging in productive conversations. Business simulations should be as close as possible to the real world in order to provide the best management learning experience. Our simulations are built using dynamic simulation modeling platform that captures non-linear relations, time delays, causal relationships and causal relationships to realistically assess the effects of team decisions on business outcomes.

The innovative platform enables you to design sustainable processes at the speed that the market demands. AVEVA Process Simulator brings agility to the entire process cycle of design, simulation and training. This allows engineers to accelerate the engineering process. Engineers can work together across disciplines on a single platform that allows them to explore all dimensions of potential designs and quantify their impact on sustainability, feasibility, profitability, and sustainability. You can save time by using the same simulation for all engineering phases, including fluid flow and dynamics modes. So that every engineer can see the impact of their programs, replace dozens of specialized programs. Create an agile engineering workflow that allows concurrent use of process, utility, control, as well as mechanical engineers.

ProModel is a discrete event simulation technology that can be used to plan, design, and improve existing manufacturing, logistics, and other operational systems. It allows you to accurately model real-world processes including their inherent variability, interdependencies, and potential changes. Optimize your system to meet your key performance indicators. From CAD files, process or values stream maps or Process Simulator models, create a dynamic, animated computer model that represents your business environment. You can clearly see and understand the current policies and processes in action. Use the model to brainstorm possible changes and to create scenarios to test them. You can run different scenarios and compare the results in the Output Viewer, which is built with the latest Microsoft®, WPF technology.

In minutes, create immersive training courses by using rich and powerful templates. Your employee training programs can be transformed into engaging virtual experiences that last, whether on screen devices or in Virtual Reality. Immersive training can reduce training costs. You can improve the efficiency of your operations and save up to 40% on your project budget. Before they become reality, you should go through the operations and procedures. You will be more prepared for anything. Immersive training can be fun and easy to understand. Gamification makes it more engaging than an online course. Learn operations and procedures before they are implemented in real life. You will be more prepared for anything.

Simcad Pro allows you to visualize, analyze, and optimize process flow systems within an interactive simulation modeling environment. Optimize, plan, optimize, and reorganize processes and procedures, while optimizing layouts, automation, scheduling, and facility improvement. Simcad Pro integrates historical and live data to offer the best simulation tool on the marketplace. Multiple industries can use these applications, including manufacturing, automation and logistics, distribution warehouse, food & beverage, and services. Multi-Threaded – 64 bit Engine Simulator-on-the-fly - You can make real-time modifications to the model as the simulation is running. You can animated the model in 3D, 2D, and VR using Ray Tracing, light effects, and shadows. Singular model building environment. Smart, Spatially Aware Agents. Sub-Flows. Collision Avoidance. Real-Time Connectivity. Spaghetti Diagrams and Congestion Analysis, Heat Maps Efficiency, OEE. Extensive reporting and analysis tools. Scenario Analyzer.

ProModel is a discrete event simulation technology that can be used to plan, design, and improve existing manufacturing, logistics, and other operational systems. It allows you to accurately model real-world processes including their inherent variability, interdependencies, and potential changes. Optimize your system to meet your key performance indicators. From CAD files, process or values stream maps or Process Simulator models, create a dynamic, animated computer model that represents your business environment. You can clearly see and understand the current policies and processes in action. Use the model to brainstorm possible changes and to create scenarios to test them. You can run different scenarios and compare the results in the Output Viewer, which is built with the latest Microsoft®, WPF technology.

ENCY Tuner simulates NC-code on the shop floor to optimize, validate and fine-tune G-codes for CNC machines and industrial robotics. It allows operators and programmers the ability to simulate machining processes, edit NC code, and reengineer legacy codes for modern equipment. Highlights: - G-code machining simulation at the cutting edge - Flexible NC code editing - NC program reengineering Support for CNC machines, robots - Detection and correction of collisions and errors Virtual Setup Tool Management - A wide selection of postprocessors, interpreters and translators - Direct installation capability in CNC controllers ENCY Tuner allows users to achieve error-free machining and streamline code adjustments. It also validates production-ready NC codes directly on the shopfloor.

ColdStream is an engineering platform for thermal simulation that runs in the cloud. It supports your entire thermal management process, from thermal design to thermal analysis. Diabatix's Thermal Simulation Software allows your business to accelerate product development by using only the latest technologies. Get insights on temperature distribution, heat dissipation and fluid flow, thermal resistance and thermal radiation, cooling capability, and more. ColdStream will find the most suitable heat sinks for your electronic devices and products. In just a few simple clicks, you can upload your geometry, configure the thermal simulator operating conditions, and set the design objectives for your heat sinks.

An electromagnetic sensor includes a "front end" that generates and receives electromagnetic waves through a subsystem called a Receiver/EXciter. A "back-end", which performs signal and data processing, is usually implemented in software, is also included. Each subsystem must be designed and developed separately before being integrated together. Integration testing presents problems that can slow down and complicate the development of the overall sensor. This is due to the interdependencies between these subsystems, which cannot be tested during development. Software patches, configuration upgrades and waveform changes become significantly more costly as they cannot be verified at the operational site. These issues can be addressed by the Virtual Receiver/EXciter, (VREX). It uses a simulated front end.

SimWalk products and services are being successfully used by authorities and consultancies all over the world. Since our foundation more than a decade ago we have been pushing the boundaries and embracing the latest technology to optimally service the transport, aviation and sports industries. We also help manage crowds. Preparing your facility, rail station or airport for the future's growing capacity requirements. Our services help you to effectively analyze the impact of different plans on crowd dynamics and safety. It is difficult to manage the day-to-day operations of public transport and aviation facilities. We help you manage your facility by providing data analysis, simulation, and planning for crowd dynamics. Public transport terminals and buildings today are highly vulnerable to a variety of threats. We can help authorities raise security awareness and propose actionable solutions.

Kombyne™, a new SaaS high performance computing (HPC), workflow tool, was initially designed for customers in the aerospace, defense, and automotive industries. It is now available to academic researchers. It allows users to subscribe for a variety of workflow solutions for HPC-related jobs, including on-the-fly extraction generation and rendering to simulation steering. Interactive monitoring and control are available with minimal simulation disruption, and no reliance upon VTK. Extract workflows and real time visualization eliminate the need for large files. In-transit workflows use a separate process that receives data from the solver and performs visualizations and analysis without interfering in the running solver. The endpoint, also known as an extract, can output point samples, cutting planes, and point samples for data science. It can also render images. The Endpoint can also be used to bridge to popular visualization codes.

Lanner's desktop modeling software, WITNESS Horizon is the most powerful, flexible, and proven process simulation technology. It allows professional modelers to quickly develop feature-rich models as well as simulation apps. This allows them to gain unparalleled insight through dynamic data visualization, and the freedom to test their choices in a safe virtual environment. With a wide variety of standard elements, you can quickly get your models up and running with simple configuration and unique logic controls. Combining continuous flows with discrete events in models can help you address a wide variety of business problems in the most efficient way. Continuous elements allow the modeling of fluids flowing through pipes and tanks, as well as situations where large volumes of parts pass through processes at speeds that can be easily represented by fluid flows.

CAESES®, foundation is a powerful parametric 3D modeler. The main purpose is to create robust variable geometry with fewer parameters. A robust and clean parametric geometry is created that is suitable for automated meshing and analysis. You can integrate, launch, and control your simulation runs. It can be your flexible GUI to process automation incl. 3D post-processing. CAESES®, which integrates automated design explorations with shape optimization, offers integrated methods. Use the shape deformation or morphing tools of CAESES to optimize imported geometries. CAESES®, a command-driven platform, can be fully scripted or customized. Also supports batch mode. You can accelerate your shape optimization process by mapping the results from an adjoint flow analysis onto the geometry parameters. In just a few days, you can have your flexible CAESES model! Easy to customize and use. No CAESES expertise required.

Machine learning and advanced analytics can be used to reduce operational risks and costs. Digital twins are an integral part of digital transformation. They can create a precise virtual replica of physical assets and objects to increase productivity, streamline operations, and increase profits. Digital Twin is a software representation or a system of physical assets, systems, or processes that can be used to detect, prevent and predict, optimize, and maximize business value through real-time analytics. GE Digital is focused on three core areas: Asset and Network. As a strategy to improve system performance, monitor, simulate, and control assets, processes, or networks. Reduce asset- and process-related incidents to protect employees' health and safety and avoid unplanned downtime.

AVEVA PRO/II™, Simulation is a steady state simulator that optimizes plant performance through process design, operational analysis, engineering studies, and improved process design. AVEVA PRO/II simulation optimizes plant performance through improved process design, operational analysis, and engineering studies. AVEVA PRO/II Simulation is designed to perform heat and material balance calculations for a wide variety chemical processes. For the most cost-effective operation, you can design new processes or evaluate alternative plant configurations. AVEVA PRO/II simulation is now available online with seamless maintenance, on-demand access, and flexible use. Our support team has over 15 years of combined experience. AVEVA PRO/II simulation optimizes plant performance through process design improvements and operational analysis. It also performs engineering studies.

Virtually test drive your business processes. Process simulation allows you to take processes for a spin and identify potential roadblocks. Cutting-edge process mapping and simulation software that is designed to help organizations with process improvement, increase efficiency, and reduce waste. Ability to simulate real-world scenarios and provide insights into the performance and bottlenecks of processes. Powerful analytics and reporting capabilities allow tracking and monitoring the performance of processes over time.

SIMULIA is powered by the 3DEXPERIENCE®, platform. SIMULIA provides realistic simulation applications that allow users to see the world around them. SIMULIA applications speed up the process of evaluating performance, reliability, and safety of products and materials before committing to physical prototypes. Powerful simulation of structures, fluids and electromagnetics scenarios, including complex assemblies, directly linked to the product data. The 3DEXPERIENCE Platform integrates modeling, simulation, visualization technology, process capture, publication and re-use. Customers can maximize the value of their existing investments in simulation horsepower by allowing simulation data and results to be connected to the platform. This allows for true corporate assets that fuel innovation for all users.

WaveFarer, a high-fidelity simulator of radars, accounts for multipathing and scattering caused by structures and vehicles within the immediate environment. It also accounts for atmospheric and scattering effects at frequencies up to 100 GHz and beyond. Applications include simulations of automotive drive scenarios and indoor sensors. WaveFarer features allow for fast and accurate analysis in a simulation of scenarios where radars are in close proximity to targets, structures, and other features. WaveFarer supports all applications that are relevant to the analysis and simulation of a radar system. This includes evaluating the placement of radar sensors and target returns in a simulated driving scenario. This includes the analysis of target radar cross-section (RCS) as well as the impact of materials.

Hardware-in the-loop simulation can be trusted and cost-effective for testing actual equipment. It is ideal for testing complex equipment, such as automobiles, planes, missiles satellites, rockets, locomotives, and airplanes. Instead of testing on the road or with real-devices, testing is done in a virtual environment. The test environment is largely replaced by mathematical models so that components can be inserted in a closed loop. This allows for more reproducible, systematic, and faster tests, which are also more reliable. Simulation Workbench is a real-time modeling environment that runs on RedHawk Linux. It allows simultaneous hardware-in-the loop simulation solutions. SIMulation Workbench is a complete framework that allows you to create and execute hardware-in the-loop simulations in real time.

SIMULATE is a Discrete Event Simulation solution that allows Original Equipment Manufacturers to model complex 3D mining environments with fully customizable mining equipment. SIMULATE is used by OEMs worldwide to provide accurate, quantifiable and productive equipment and services for mining clients. SIMULATE allows users to quantify and prove the value of equipment through simulated demonstrations. OEMs can use customer data to create a 'digital-twin' of any mining site, whether it is open pit or underground. This will allow them to accurately represent haulage operations at any mine, and actively demonstrate the value of their equipment and services. SIMULATE is the most widely-used haulage calculation engine used in the mining industry. This ensures that you and your customer are on the same page. Improved operations can increase profitability.

OnScale is the original Cloud Engineering Simulation platform. It combines multiphysics solver technology and the unlimited compute power of cloud supercomputers to create a powerful platform for Cloud Engineering Simulation. OnScale allows engineers to run large numbers of full 3D multiphysics simulaions simultaneously. This allows them to create digital prototypes of high-tech devices. These digital representations can be used to capture the entire behavior of the device within its operating envelope. OnScale Solve is a cloud-based engineering simulation that provides a powerful, easy-to-use, and effective experience. OnScale Solve can run on both public and private cloud supercomputers. It includes a web-based UI, API to integrate into any design workflow, scripting language to customize engineering simulations and plugins to improve its modeling capabilities. OnScale Solve provides engineers with the ability to simulate data and train advanced AI/ML algorithms.

HAULSIM connects fleet assets, mining operations plans and people to create a 'digital twin of any mining operation - underground or open pit - that accurately represents any mine site haulage operations. HAULSIM, which has a 3-D Discrete Event Simulation engine (DES) at its core, is the only mining simulator software that can quantify changes as the models reflect all aspects of a mine site, including variability, interactions, and dependencies. Real data can be used to make decisions about a mine haulage system. This allows the user to test multiple 'whys' and 'what if' scenarios in order to reduce operating costs, optimise performance, and ensure operational safety and efficiency.

You can take the guesswork out your decision-making. Arena software allows you to move confidently. Simulation software creates a digital twin from historical data. This is then compared against your actual system's results. Arena™, Simulation Software uses the discrete-event method for most simulation tasks, but you'll see that the tool covers areas in flow and agent based modeling. To optimize performance, evaluate potential approaches. Key metrics such as throughput, costs, cycle times and equipment utilization can help you understand the system's performance. Before making major capital or resource expenditures, you can reduce risk by rigorous simulation and testing process changes. Assess the impact of uncertainty on system performance. Run "what-if" scenarios to evaluate proposed process changes.

You will find a modular, open-source virtual driving simulator that allows you to test against a variety objectives and performance requirements. Ansys VRXPERIENCE Driving Simulator powered by SCANeR™ allows you to create scenarios, test software, and consider vehicle dynamics. It allows you to create a virtual driving environment for testing performance and analyzing the results. VRXPERIENCE Driving Simulator allows for an immersive, simulated test-drive experience in a realistic setting. You can conduct thorough safety assessments and drive millions of virtual kilometers in days. This will accelerate development by 1,000x when compared to road-testing. As passenger cars become more digitalized and autonomous, they will require advanced technologies such as sensors like cameras, radars and lidars as well as embedded software that supports automated control systems.

Metariver Technology Co., Ltd. develops innovative and creative computer-aided engineering (CAE) analysis S/W based upon the most recent HPC technology and S/W technologies including CUDA technology. We are changing the paradigm in CAE technology by using particle-based CAE technology, high-speed computation technology with GPUs, and CAE analysis software. Here is an introduction to our products. 1. Samadii-DEM: works with discrete element method and solid particles. 2. Samadii-SCIV (Statistical Contact In Vacuum): working with high vacuum system gas-flow simulation. 3. Samadii-EM (Electromagnetics) : For full-field interpretation 4. Samadii-Plasma: For Analysis of ion and electron behavior in an electromagnetic field. 5. Vampire (Virtual Additive Manufacturing System): Specializes in transient heat transfer analysis.

USIM PAC is a steady state process modeling and simulation program that can be used to optimize industrial processes. USIM PAC can simulate, model, and balance all streams and units of your processing plant from one interface. USIM PAC is a special engineering software. It is based on the detailed and configurable characterisation of material. It is especially useful if you work with solids or complex mixtures that are difficult to describe as pure substances. Empower engineering decisions. Your processing plant's efficiency and profitability will increase. You will be safer, faster, and more efficient. USIM PAC is a comprehensive software platform that allows for the simulation and modeling of industrial processes. It can perform simulation, data reconciliation and mass balancing, as well as flowsheeting, equipment size, economic and environmental calculations, and off-line optimization in one environment for the entire plant or a portion thereof.

Simufact Additive, a powerful and scalable solution for the simulations of metal-based additive manufacturing processes, is available. Simufact Additives can be used to optimize metal 3D printing and rapid prototyping. Simufact additive can help you significantly reduce the number test prints. We want to help you create AM components with repeatable dimensions. Simufact Additive's multiscale approach to simulation combines the best of both mechanical and thermal methods in one unique software solution. You can choose the simulation method that best suits your needs. Simufact Additive, a specialized software solution, is dedicated to the simulation and analysis of additive manufacturing processes. This is reflected in a lean operation concept for the user.

Multiphysics software from COMSOL allows you to simulate real-world designs, processes, and devices. Multipurpose simulation software that uses advanced numerical methods. Fully coupled multiphysics and single physics modeling capabilities. The entire modeling process, from geometry to postprocessing. Easy-to-use tools for creating and deploying simulation applications. The COMSOL Multiphysics® software provides a consistent user interface regardless of engineering application or physics phenomena. Add-on modules offer specialized functionality for electromagnetics and structural mechanics. You can choose from a variety of LiveLink™, products to interface with CAD or other third-party software. COMSOL Server™ and COMSOL Compiler™, allow you to deploy simulation applications. This software platform allows you to create simulation applications and physics-based models.

There are increasing numbers of variants, with a tendency to have fewer product life cycles and lower cost. Digital twins are essential in many areas of digitization. ISG Industrielle Steuerungstechnik GmbH is a company that has years of experience in creating simulation solutions that offer significant competitive advantages to customers in the fields of mechanical and plant engineering. The new generation ISG virtuos 3 makes the simulation platform a solution for manufacturing automation as well as intralogistics. ISG-virtuos allows you to simulate complete production systems, including all components (controls and robots, material flow, etc.). It is open to all companies. can be optimized and checked in deterministic real-time. Simulations are made from virtual components that can be reused or exchanged at any moment.

Software that improves asset performance. All in one integrated suite: maintenance and spares optimizations, availability studies, reliability centered maintenance, cost evaluations of life cycles, and accelerated testing. Connect directly to SAP or MAXIMO and analyze data. Weibull analysis can be used to identify critical equipment and automatically create failure models. Simulate your maintenance plans to optimize them and reduce costs. Predict system availability to optimize your design. Simulation of multiple-product capacities with target cost penalties. Model system dependencies using fault trees or RBDs. Create operational rules to accurately simulate performance. Find the best policy for spares. In the ALT module, you can predict life cycle costs and analyze test data to identify stressed failures. Process reliability module identifies trends in plant performance.

FEATool Multiphysics – "Physics Simulator Made Easy" – a fully integrated physics simulation, FEA and CFD toolbox. FEATool Multiphysics provides a fully integrated simulation platform that includes a unified user interface for several multi-physics solvers such as OpenFOAM and Computational fluid dynamics (CFD), including SU2 Code and FEniCS. This allows users to model coupled physics phenomena, such as those found in fluid flow and heat transfer, structural, electromagnetics acoustics and chemical engineering applications. FEATool multiphysics is a trusted tool for engineers and researchers in the energy, automotive and semi-conductor industries.

Simcenter STAR -CCM+ is a multiphysics fluid dynamics (CFD), software that simulates products under real-world conditions. Simcenter STAR–CCM+ is a unique CFD simulation toolkit that allows for automated design exploration and optimization. This integrated environment contains everything you need, including CAD, automated meshing and multiphysics CFD. It also includes sophisticated postprocessing and design exploration. Engineers can efficiently explore the entire design space and make better design decisions quicker. Simcenter STAR -CCM+ provides additional insight that can be used to guide your design process, resulting in more innovative products that meet customer expectations.

ProSimPlus is a chemical simulation software that is intuitive and easy to use. Users can quickly get used to it. This software is used by many of the world's most prominent oil, gas, chemical, energy, or bio-based companies.

20-sim is a modeling software package that simulates mechatronic systems. 20-sim allows you to enter models graphically in a similar way as drawing an engineering plan. These models allow you to simulate and analyze multi-domain dynamic systems, and create control systems. For rapid prototyping or HIL-simulation, you can even generate C code and run it on hardware. 20-sim offers features that make it easy to create models quickly and intuitively. You can create models with equations, block diagrams and physics blocks. You can build models, simulate them, and analyze their performance with a variety of features. The 20-sim editor allows you to build models. This editor has a large model library that includes building blocks that can be used to build models. Many components are included in the model library, including block diagrams and bond charts.

MASTA is a comprehensive suite of CAE software that allows you to design, simulate and analyze driveline systems from conception through to manufacturing. MASTA allows you to quickly and accurately design transmission systems from scratch, or import concepts. Completely understand the life cycle of a mechanical component over the customer's duty cycle. Identify potential failure points early in product development. Rapidly predict key performance characteristics during the design stage. You can easily explore changes in transmission layout, components selection, and/or design, as well as manufacturing processes, in a virtual environment. You can run full system simulations of any transmission or driveline configuration. To reduce development time and cost, incorporate manufacturing simulation into the design phase. MASTA's unique, modern architecture is written in C# and makes it a much more stable alternative to current and future operating system solutions.

Our unique, transient Lattice Boltzmann physics PowerFLOW CFD solution allows simulations to accurately predict real-world conditions by leveraging this unique technology. PowerFLOW suite allows engineers to evaluate product performance before any prototype is built. This is when budgets and design impact are most important. PowerFLOW imports complex model geometry and performs accurate and efficient aerodynamic, thermal management and aeroacoustic simulations. Automated domain modeling and turbulence modeling without the need to manually volume mesh or boundary layer mesh can be done with PowerFLOW. PowerFLOW simulations can be run confidently on a large number of compute cores running on common High Performance Computing platforms (HPC).

SpectreUQ™, which is based on Sandia National Laboratories' highly developed DAKOTA software, adds a wizard that guides the engineer through the UQ process. The details of the UQ process are managed behind the scenes. It uses a database to store simulation and experiment results in a structured manner and provides interactive graphing tools and visualization tools. It is available as an annual subscription with no restrictions on user count and in source code format. SpectreUQ™, unlike other methods, is not intrusive to the simulation. It runs alongside the code and not within it. You can evaluate hundreds of flight conditions using your HPC to train built-in surrogate modelers. Easy to learn and easy to use, refined over hundreds of hours of actual UQ studies. To guide the process of ingestion of experimental data and CFD results, the Oberkampf-Roy Method is used. Interactive plots of results can be easily viewed and published.

Working Model is the most popular motion simulation product in the entire world. Use powerful analytical tools to confirm your design. Optimize designs before creating physical prototypes by using the "run-analyze - refine" process. Reduce the time required for physical prototyping. The simulation environment is yours to control. You can quickly build, run, and refine simulations using pre-defined constraints and objects. You can pause, stop, reset, single-step or pause the simulation at anytime. Measure force, torque, acceleration and other parameters to analyze your latest design. Any object can be acted upon. View output in vectors, numbers, and graphs in English and metric units. Import 2D CAD drawings into DXF format. You can import equations, sliders, and DDE links to Excel and MATLAB. You can create bodies and specify their mass properties, initial velocity, and electrostatic charge. To optimize simulations and document models, run or edit scripts. Attach pictures to create visually appealing presentations.

Creator, which is natively based on OpenFlight 3D simulation models, is the original software to create optimized 3D models for your virtual environment. Creator is the industry standard software for creating optimized 3D models for virtual environments. Content creators are continually challenged to create more detailed models, better performance, and greater realism. Content creators have a wide range of tools to help them create models, modify or import existing models, and enhance objects for use with sensor-capable simulations. Creator gives you complete control over the modeling process and allows you to quickly create highly optimized, physically accurate 3D models. Creator allows you to create models faster and more precisely by allowing you to interact with your models at every level, from the database to the single vertex attribute.

Combining visual paradigm and code generation makes it easier than ever to create new models, define bespoke behavior, assign plans to specific entities, and create all kinds of scenarios, from the simplest test-bed to the most complicated distributed trainer. vsTASKER is capable of displaying, animating, and visualizing any size or complexity of scenarios. Simulator creation is simple thanks to the graphical paradigm and automatic C++ codes generation. vsTASKER is not limited to any one field. vsTASKER offers unprecedented tools to customize your synthetic environment. This includes everything from a simple 2D map to the most complicated 3D game-like environment. Once you understand the concepts, it is easy to test a scenario or create a system.

Cosmo Tech offers a 360deg Simulation Digital Twin platform that solves complex industrial problems and leads enterprise decision making. Cosmo Tech is used by industrial companies to predict the future of their organizations, to better understand the impact and optimize all levels enterprise planning. This ensures a resilient, sustainable and secure future. To plan for the future, create scenarios that include disruptions to your system. You can predict how you will recover quickly from disruptions such as machine breakdowns, strikes by workers, and higher costs by running simulations. To make complex decisions, you can see which parameters and processes to adjust in the digital twin. At a glance, you can see all variables involved in decision making and the cascading effects of altering them.

Ansys Maxwell solves EM fields for electric machines, transformers and wireless charging. It also works with actuators, permanent magnet latches and other electrmechanical devices. It can solve static, frequency-domain, and time-varying electric fields. Maxwell also offers specialized interfaces for power converters and electric machines. Maxwell allows you to precisely characterize the transient, nonlinear motion of electromechanical components as well as their effects on the drive circuit design and control system design. Maxwell's electromagnetic field solvers can be seamlessly linked to the integrated circuit or systems simulation technology to enable you to understand the performance of electromechanical system before you build a prototype in hardware. Maxwell provides a reliable simulation of low-frequency electromagnetic field in industrial components.

Induction heat treatment simulations provide comprehensive information on temperature gradients from surface to core as well as the location of areas that undergo phase transformations. SIMHEAT®, for example, can monitor the effect of coil geometry, current frequency and even the location of concentrators within the heat-affected zone. Material modelling considers electrical and magnetic properties that are temperature-dependent. SIMHEAT®, a standalone solution, can be used in conjunction with Transvalor software. The perfect interoperability ensures seamless results transfer between solutions. SIMHEAT®, with all its capabilities and functionalities, is also integrated into our FORGE®, dedicated to the simulation and analysis of hot, semi-hot, and cold forming processes.

Forum8's interactive VR Design Studio* software is used by hundreds of research and urban planners as well as transportation authorities, vehicle manufacturers, and vehicle manufacturers on all four continents. It creates fully immersive, realistic models for the built environment. Interactive 3D VR Simulation and Modeling Software VR-Design Studio allows users to dynamically manipulate 3D space and run unlimited simulation scenarios. Users can also import and edit CAD data and build and texture models. Additionally, they can automatically add roads, tunnels, bridges, and other design options in real time, both online and off. The models can be viewed and interacted with by users. This allows them to analyze the potential environmental impacts of the proposed development.