Alternatives to USIM PAC

Azore is software for computational fluid dynamics. It analyzes fluid flow and heat transfers. CFD allows engineers and scientists to analyze a wide range of fluid mechanics problems, thermal and chemical problems numerically using a computer. Azore can simulate a wide range of fluid dynamics situations, including air, liquids, gases, and particulate-laden flow. Azore is commonly used to model the flow of liquids through a piping or evaluate water velocity profiles around submerged items. Azore can also analyze the flow of gases or air, such as simulating ambient air velocity profiles as they pass around buildings, or investigating the flow, heat transfer, and mechanical equipment inside a room. Azore CFD is able to simulate virtually any incompressible fluid flow model. This includes problems involving conjugate heat transfer, species transport, and steady-state or transient fluid flows.

AVEVA PRO/II™ Simulation serves as a steady-state simulator that enhances plant efficiency by refining process design, conducting operational analyses, and executing engineering studies. By offering a comprehensive approach to optimization, AVEVA PRO/II Simulation focuses on enhancing plant performance through the improvement of process design and operational analysis while also conducting in-depth engineering studies. Capable of performing complex heat and material balance calculations for an extensive array of chemical processes, this simulation tool presents a diverse selection of thermodynamic models applicable across multiple industries. It allows users to devise new processes and assess alternative plant configurations to achieve the most economical operations. Now accessible via the cloud, AVEVA PRO/II Simulation provides on-demand availability, straightforward maintenance, and adaptable usage options. Additionally, users can benefit from a highly experienced support team with over 15 years in the field, ensuring assistance whenever needed. Overall, AVEVA PRO/II Simulation stands out as a robust solution for optimizing plant performance, streamlining design processes, and enhancing operational efficiency.

Ansys Motor-CAD serves as a specialized tool for the design of electric machines, facilitating rapid multiphysics simulations throughout the entire torque-speed operating range. It allows design engineers to assess various motor configurations and concepts to create designs that maximize performance, efficiency, and compactness. With its four integrated modules—EMag, Therm, Lab, and Mech—Motor-CAD enables quick and iterative multiphysics calculations, significantly reducing the time from initial concept to finalized design. This efficiency in calculations and streamlined data input processes provides users with the opportunity to investigate a broader array of motor topologies and thoroughly evaluate the effects of advanced loss mechanisms in the early phases of electromechanical design. The latest release boasts enhanced capabilities for design optimization, multiphysics analysis, and system modeling tailored specifically for electric motors, ensuring that engineers have the tools they need for cutting-edge development. Ultimately, Motor-CAD's fast multiphysics simulation capabilities across the full torque-speed range empower engineers to innovate and refine electric motor designs with unprecedented efficiency.

DWSIM is a versatile and free chemical process simulator that adheres to CAPE-OPEN standards, functioning seamlessly on multiple operating systems like Windows, Linux, macOS, Android, and iOS. Its user-friendly graphical interface allows for features that were once only available in paid software. The simulator excels in both steady-state and dynamic modeling by employing a parallel modular solver for enhanced efficiency. Additionally, DWSIM comes equipped with sophisticated property packages. Users can access an extensive array of unit operations, such as mixers, splitters, separators, pumps, compressors, expanders, heaters, coolers, valves, pipe segments, shortcut columns, heat exchangers, a variety of reactors, distillation and absorption columns, solids separators, and cake filters, alongside spreadsheets, Python scripts, and flowsheet unit operations. Furthermore, it includes an Excel Add-In for executing thermodynamic calculations directly within spreadsheets, as well as an automation API that facilitates the creation, modification, execution, and saving of flowsheets, making it an all-encompassing tool for chemical engineering. With its robust capabilities and user-centric design, DWSIM stands out as an invaluable resource for professionals in the field.

Honeywell's UniSim® Design Suite serves as a multifunctional software solution for process simulation and modeling, allowing engineers to develop both steady-state and dynamic models aimed at enhancing plant design, optimization, and troubleshooting efforts. This suite includes features tailored for sustainability initiatives, such as carbon capture and the generation of green hydrogen, thereby promoting enhanced operational efficiency and alignment with business objectives. Additionally, UniSim models can function as digital twins, providing capabilities to track plant performance, forecast changes in processes, and bolster safety, output, and profitability in various operations. Ultimately, this tool empowers engineers to make informed decisions that contribute to a more sustainable and efficient industrial landscape.

SuperPro Designer offers a comprehensive solution for modeling, assessing, and enhancing both integrated batch and continuous processes in a wide range of sectors, such as biotechnology, pharmaceuticals, specialty chemicals, food production, consumer goods, metallurgy, materials, and both water and air treatment. By merging manufacturing and environmental operation models, it allows users to simultaneously design and improve production processes while addressing pollution prevention and control. The software features more than 140 unit operations and procedures, including well-mixed reactors, fermentors, plug flow reactors, crystallizers, distillation columns, and various separation and purification systems. In addition, SuperPro Designer includes detailed modules for reactions and vapor-liquid equilibrium separations, as well as comprehensive material and energy balances, extensive databases for chemical components and mixtures, equipment sizing, costing, and in-depth process economics analysis, ensuring users can optimize their processes effectively. This multifaceted tool not only aids in technical design but also supports sustainability efforts within industries.

Modelon’s OPTIMICA Compiler Toolkit stands out as the market's leading Modelica-based mathematical engine, providing users with a robust solution for automating, simulating, and optimizing system behaviors across the model-based design cycle. As the trusted compiler for Modelon Impact, OPTIMICA allows users to construct multi-domain physical systems by selecting from a vast library of model components. The toolkit’s cutting-edge solvers facilitate the evaluation of intricate physical systems, accommodating both transient simulations and steady-state calculations, as well as dynamic optimization. With its advanced mathematical capabilities, OPTIMICA can effectively manipulate and streamline models to enhance performance and reliability, catering to diverse industries and applications that range from automotive and active safety to energy and power generation optimization. Given the growing demand for effective power regulation in the contemporary energy landscape, optimizing the startup processes of thermal power plants has become a critical industrial requirement. Furthermore, the flexibility and efficiency of OPTIMICA make it an invaluable asset for engineers tackling complex system challenges.

Accelerating product market entry while ensuring high quality necessitates the use of cohesive engineering workflows along with minimal changeover and startup durations. The SIMIT Simulation Platform facilitates extensive testing of automation applications and offers a realistic training setting for operators even before the plant becomes operational. By fostering opportunities for process refinement and knowledge retention, SIMIT contributes to decreased commissioning times and a significantly faster time-to-market. Ultimately, this leads to improved efficiency across the entire lifecycle of manufacturing and process facilities. Furthermore, SIMIT supports thorough testing of automation initiatives and allows for virtual commissioning of systems, machines, and processes all within a single platform, thereby streamlining operations. Additionally, the platform's realistic training environments ensure that personnel are well-prepared to manage the complexities of their roles.

Symmetry process simulation software facilitates comprehensive life cycle modeling from initial design through to operational phases, enhancing troubleshooting capabilities, enabling feed and startup analyses, and optimizing system performance effectively. It features an extensive array of design tools specifically for flare and relief systems, allowing users to confirm the efficacy of their entire safety frameworks. The platform boasts versatility, accommodating various applications by evaluating both individual components and complete systems at different levels of detail, whether in steady-state or dynamic conditions. Additionally, Symmetry introduces an innovative methodology for traditional oil pseudo-component characterization methods. By leveraging chemical family structures, its fluid characterization process allows for precise estimation of physical properties in blending, separation, and reactive systems, thus ensuring reliable thermodynamics and effective component tracking throughout the entire system. Furthermore, the software provides a wide range of options that prioritize transparency and user accessibility. This adaptability makes it an invaluable tool for engineers seeking to enhance their process simulations.

aPriori is the leading provider of digital manufacturing simulation software that brings product design and sourcing teams closer to production. By leveraging the digital twin within our digital factories, we automatically generate manufacturing insights that helps manufacturers collaborate across the product development process to make better design, sourcing, and manufacturing decisions that yield higher-value products in less time. aPriori solutions are now available in the cloud or on-premise. aPriori combines Product Cost Management, Design for Manufacturing and Sustainability, and Supplier Collaboration capabilities. The platform includes more that 450 manufacturing process simulation and more than 80 regional economic models, to yield insights that accelerate time to market by 20% while achieving hundreds of millions of dollars in cost savings and decreased CO2 footprint. More than 300 manufacturing companies in the world have chosen aPriori Product Design & Manufacture Optimization platform to develop the best sustainable product at the right price and delivered on time.

CADSIM Plus is an innovative software designed for chemical process simulation, integrating a dynamic simulator based on first principles with a comprehensive Computer Assisted Drawing (CAD) interface all in one solution. It excels in conducting accurate heat and material balances across various chemical processes and is capable of creating intricate dynamic simulations that incorporate control logic and batch operations. The software is equipped with an extensive array of generic process modules and provides optional libraries tailored for diverse applications. CADSIM Plus accommodates a broad spectrum of drawing complexities, ranging from straightforward block diagrams to intricate engineering schematics, and facilitates the export of designs to AutoCAD and other conventional CAD software. With its 'electronic flowsheet' runtime simulation mode, users are provided with interactive and animated tools for simulation, allowing real-time adjustments to process conditions during operation. This versatile software finds applications in process design, troubleshooting, forecasting future process scenarios, and addressing challenges related to dynamic control, making it a valuable asset for engineers and researchers alike. Furthermore, its user-friendly interface ensures that even those new to process simulation can effectively harness its powerful capabilities.

Virtually test drive your business processes. Process simulation allows you to take processes for a spin and identify potential roadblocks. Cutting-edge process mapping and simulation software that is designed to help organizations with process improvement, increase efficiency, and reduce waste. Ability to simulate real-world scenarios and provide insights into the performance and bottlenecks of processes. Powerful analytics and reporting capabilities allow tracking and monitoring the performance of processes over time.

Robust simulation software designed to enhance asset performance is available, offering features such as maintenance and spare parts optimization, availability assessments, reliability-centered maintenance strategies, life cycle cost analyses, and accelerated life testing, all within a single cohesive platform. This software seamlessly integrates with your SAP or MAXIMO systems for comprehensive data analysis. It allows for the identification of critical machinery and the automatic generation of failure models through Weibull analysis. By leveraging simulation, you can refine your maintenance strategies and cut expenses. Additionally, the tool predicts system availability while optimizing design processes. It also facilitates the simulation of capacity for multiple products, incorporating target cost penalties. You can model interdependencies within systems using reliability block diagrams (RBDs) or fault trees. Operational rules can be embedded to ensure accurate performance simulations. Furthermore, it helps in determining the optimal spare parts inventory strategy. Life cycle costs can be predicted, and the ALT module allows for the analysis of test data related to stressed failures. Lastly, the software enables the identification of performance trends within the process reliability module, providing valuable insights for continuous improvement.

Utilize COMSOL's multiphysics software to replicate real-world designs, devices, and processes effectively. This versatile simulation tool is grounded in sophisticated numerical techniques. It boasts comprehensive capabilities for both fully coupled multiphysics and single-physics modeling. Users can navigate a complete modeling workflow, starting from geometry creation all the way to postprocessing. The software provides intuitive tools for the development and deployment of simulation applications. COMSOL Multiphysics® ensures a consistent user interface and experience across various engineering applications and physical phenomena. Additionally, specialized functionality is available through add-on modules that cater to fields such as electromagnetics, structural mechanics, acoustics, fluid dynamics, thermal transfer, and chemical engineering. Users can select from a range of LiveLink™ products to seamlessly connect with CAD systems and other third-party software. Furthermore, applications can be deployed using COMSOL Compiler™ and COMSOL Server™, enabling the creation of physics-driven models and simulation applications within this robust software ecosystem. With such extensive capabilities, it empowers engineers to innovate and enhance their projects effectively.

Adaptive Research is excited to unveil the CAESIM 2024 simulation platform, which is now available for immediate use, featuring enhanced computational fluid dynamics modeling along with multi-physics functionalities. This latest software version introduces innovative tools and features designed to streamline the modeling process, enabling CFD engineers to achieve rapid simulation results with greater efficiency. Additionally, the platform aims to enhance user experience through improved interfaces and capabilities.

Promote circular economy efforts while addressing global economic issues, evolving market trends, and competitive forces by enhancing performance, quality, and market readiness through leading-edge simulation software tailored for chemicals, polymers, life sciences, and innovative sustainability practices. Aspen Plus stands as the premier process simulator, drawing on more than four decades of expertise and insights from leading chemical firms, complemented by a renowned physical properties database. This software offers comprehensive process modeling that integrates economic, energy, safety, and emissions evaluations, thereby enhancing time-to-market, process efficiency, and sustainability metrics. By leveraging Aspen Plus, the efficiency of chemical operations is significantly boosted, making it a valuable tool for the bulk chemicals, specialty chemicals, and pharmaceutical sectors. This advanced modeling technology not only facilitates the optimization of throughput and product quality but also reduces energy consumption across various processes, paving the way for a more sustainable future. Ultimately, Aspen Plus empowers industries to meet the challenges of modern manufacturing while driving innovation and environmental responsibility.

Working Model stands out as the top-selling motion simulation software globally. Validate your designs using robust analytical tools at your disposal. The rapid "run-analyze-refine" process enables you to fine-tune your designs prior to creating any physical prototypes, significantly minimizing the need for such prototypes. You maintain complete oversight of the simulation environment. Build, execute, and enhance simulations swiftly with ready-made objects and constraints. You can run, halt, reset, single-step, or pause the simulation whenever necessary. Evaluate your most recent design by measuring various factors like force, torque, and acceleration acting on any component. Outputs can be viewed as vectors or numerical data, presented in either English or metric units. Additionally, you can import your 2D CAD drawings in DXF format seamlessly. Values can be input from equations, sliders, and DDE links to both MATLAB and Excel. Construct bodies and define their mass properties, initial velocity, and electrostatic charge among other parameters. You have the option to run or modify scripts to enhance simulations, document models, and much more. Furthermore, you can create compelling presentations by incorporating images, elevating the overall impact of your work. This comprehensive tool transforms the way designers and engineers approach motion simulation.

Create efficient and eco-friendly processes that keep pace with market needs by utilizing a cutting-edge, interconnected platform aimed at fostering a circular, sustainable environment. AVEVA Process Simulation enhances flexibility throughout the entire lifecycle of design, simulation, training, and operations, ultimately facilitating the process aspect of the digital twin and expediting the engineering timeline. Engineers are able to work together across various disciplines within one cohesive platform, allowing them to examine all facets of a proposed design while assessing its sustainability, practicality, and economic viability. By employing the same simulation across all engineering stages, you can eliminate unnecessary efforts and streamline the process, fluid flow, and dynamics within a unified model. Replace multiple specialized software tools with a single, user-friendly interface so that every engineer can understand and appreciate their contributions. Additionally, cultivate a nimble engineering workflow that allows for simultaneous collaboration among process, utility, control, and mechanical engineers, resulting in more innovative solutions. This approach not only enhances productivity but also encourages a culture of sustainability across all engineering practices.

Tackle intricate engineering problems by improving the efficiency of simulations. Simcenter 3D stands out as one of the most thorough and seamlessly integrated CAE solutions available. It allows you to create and assess the performance of complex products through groundbreaking advancements in simulation efficiency. By bringing together various physics domains within a single modeling environment, you can quickly gain deeper insights into how your product performs. This integrated platform facilitates all aspects of CAE pre- and post-processing, allowing for a streamlined workflow. With unmatched tools for geometry manipulation, you can easily defeature and simplify CAD geometry from any origin. Additionally, its extensive meshing and modeling capabilities cater to diverse simulation needs, granting you the exceptional ability to connect your analysis model with design data seamlessly. This connection not only accelerates the often tedious modeling process but also ensures that your analysis models remain aligned with the most current design iterations, ultimately enhancing productivity and accuracy in your engineering projects. By adopting Simcenter 3D, you can significantly reduce development time while improving the quality of your simulations.

FEATool Multiphysics – "Physics Simulator Made Easy" – a fully integrated physics simulation, FEA and CFD toolbox. FEATool Multiphysics provides a fully integrated simulation platform that includes a unified user interface for several multi-physics solvers such as OpenFOAM and Computational fluid dynamics (CFD), including SU2 Code and FEniCS. This allows users to model coupled physics phenomena, such as those found in fluid flow and heat transfer, structural, electromagnetics acoustics and chemical engineering applications. FEATool multiphysics is a trusted tool for engineers and researchers in the energy, automotive and semi-conductor industries.

Originating from OpenFlight, which is the most commonly accepted standard in the industry for 3D simulation models, Creator serves as the pioneering software for developing optimized 3D models intended for virtual environments. Specifically crafted for simulation purposes, Creator stands as the benchmark software in generating optimized 3D models suitable for real-time virtual scenarios. Content creators consistently face the challenge of creating an increasing number of models that exhibit higher detail, enhanced realism, and superior performance. Equipped with a comprehensive array of tools, content creators can design models from the ground up, modify or import pre-existing ones, and improve objects for utilization in simulations that rely on sensors. With complete authority over the modeling process, Creator enables users to swiftly produce highly optimized and physically accurate 3D models with various detail levels. This software offers full interactive control over your models, from the database level right down to individual vertex attributes, allowing for more rapid development and unprecedented control in the modeling process. As a result, users can achieve greater efficiency and creativity in their projects, ultimately leading to richer virtual experiences.

Simcenter STAR-CCM+ is an advanced multiphysics computational fluid dynamics (CFD) software that enables the simulation of products in conditions that mimic real-life scenarios. This software stands out by incorporating automated design exploration and optimization into the CFD toolkit accessible to engineers. With a unified platform that encompasses CAD, automated meshing, multiphysics CFD capabilities, and advanced postprocessing, it empowers engineers to thoroughly investigate the entire design landscape, facilitating quicker and more informed design choices. By leveraging the insights offered by Simcenter STAR-CCM+, the design process becomes more strategic, ultimately resulting in innovative products that surpass customer expectations. Enhancing a battery's performance across its complete operating spectrum is a complex endeavor that necessitates the concurrent optimization of various parameters. In this context, Simcenter delivers a comprehensive simulation environment tailored for the analysis and design of electrochemical systems, fostering a deeper understanding of their behavior. This holistic approach allows engineers to tackle intricate challenges with confidence and precision.

Simcad Pro allows you to visualize, analyze, and optimize process flow systems within an interactive simulation modeling environment. Optimize, plan, optimize, and reorganize processes and procedures, while optimizing layouts, automation, scheduling, and facility improvement. Simcad Pro integrates historical and live data to offer the best simulation tool on the marketplace. Multiple industries can use these applications, including manufacturing, automation and logistics, distribution warehouse, food & beverage, and services. Multi-Threaded – 64 bit Engine Simulator-on-the-fly - You can make real-time modifications to the model as the simulation is running. You can animated the model in 3D, 2D, and VR using Ray Tracing, light effects, and shadows. Singular model building environment. Smart, Spatially Aware Agents. Sub-Flows. Collision Avoidance. Real-Time Connectivity. Spaghetti Diagrams and Congestion Analysis, Heat Maps Efficiency, OEE. Extensive reporting and analysis tools. Scenario Analyzer.

Understanding how light travels and influences both product efficacy and human experience is essential for assessing performance and ensuring comfort, perception, and safety. Ansys Optics stands out by effectively simulating the optical characteristics of a system, assessing the ultimate lighting effects, and forecasting the repercussions of variations in lighting and materials on appearance and perceived quality, all within realistic scenarios. With this advanced visualization tool, you can conceptualize your product prior to its creation, thereby enhancing the virtual experience for customers. Allow Ansys Optics and its optical simulation capabilities to guide you towards optimal solutions for any project style. The software adeptly addresses intricate optical challenges while enhancing visual aesthetic quality. By integrating design and engineering into a seamless workflow, you can significantly boost the final quality of your product, creating true-to-life visualizations that resonate with users. Additionally, you can develop and evaluate virtual prototypes of a cockpit HMI within an immersive, real-time setting, providing a comprehensive understanding of user interaction. This process not only improves design outcomes but also fosters innovation in product development.

The Akselos Cloud platform offers a comprehensive framework for Digital Twins through a cloud-based solution. It encompasses a full spectrum of services, from automated updates regarding asset loads and conditions to user-friendly dashboards that clearly display current asset integrity. With Akselos technology, there are no longer any constraints, as it allows for the modeling of intricate issues in structures of any scale with remarkable precision. Our innovative approach accelerates structural simulations, achieving speeds up to 1000 times faster than traditional software. Tasks related to design and operational workflows that previously required months of effort can now be completed in just hours. Furthermore, relevant data, including sensors and process parameters, can be seamlessly integrated with our models, enabling even greater optimization of your assets. Each of our simulations rigorously validates results against applicable engineering codes and standards, ensuring that you can trust your asset’s safety and compliance with all necessary regulations. This comprehensive capability not only enhances efficiency but also fosters greater innovation in asset management and maintenance.

Enhance product development and accelerate the launch process with FLOW-3D, an exceptionally precise CFD software adept at addressing transient, free-surface challenges. Accompanied by our cutting-edge postprocessor, FlowSight, FLOW-3D offers a comprehensive multiphysics suite. This versatile CFD simulation platform empowers engineers to explore the dynamic interactions of liquids and gases across a diverse array of industrial sectors and physical phenomena. With a strong emphasis on multi-phase and free surface applications, FLOW-3D caters to various industries, including microfluidics, biomedical technology, civil water infrastructure, aerospace, consumer goods, additive manufacturing, inkjet printing, laser welding, automotive, offshore enterprises, and energy sectors. As a remarkably effective multiphysics resource, FLOW-3D combines functionality, user-friendliness, and robust capabilities to support engineers in achieving their modeling goals, ultimately driving innovation and efficiency in their projects. By leveraging FLOW-3D, organizations can overcome complex challenges and ensure that their designs are optimized for success in competitive markets.

Ansys PathFinder-SC serves as a robust and scalable solution designed to facilitate the planning, verification, and approval of IP and full-chip SoC designs, ensuring their integrity and resilience against electrostatic discharge (ESD). This innovative tool effectively identifies and isolates the underlying sources of design problems that could lead to chip failures due to charged-device model (CDM), human body model (HBM), or various ESD incidents. With its cloud-native architecture capable of harnessing thousands of compute cores, PathFinder-SC significantly accelerates full-chip turnaround times. Endorsed by leading foundries for current density assessments and ESD approval, it stands out as a reliable choice in the industry. The platform's comprehensive data modeling, extraction, and transient simulation engine provides an all-encompassing solution for ESD verification. Utilizing a single-pass model, it seamlessly reads industry-standard design formats, establishes ESD rules, extracts RCs for the power network, and conducts ESD simulations to pinpoint root causes while offering repair and optimization suggestions, all consolidated within one powerful tool. This streamlined process not only enhances efficiency but also reduces the time-to-market for critical design projects.

ChemSep is an advanced column simulator utilized for processes such as distillation, absorption, and extraction, which seamlessly integrates both classic equilibrium stage models and nonequilibrium (rate-based) models within a user-friendly interface. This software boasts an extensive library containing capacity and mass transfer performance parameters for various trays and packings, enhancing the accuracy of modeling real-world column performance. With its design mode, ChemSep offers automatic simulation capabilities and facilitates the determination of column diameter based on specified flood fractions, while incorporating industry-standard design methods and pressure drop calculations for both trayed and packed columns. The program is versatile, supporting a wide range of column configurations and specifications that empower users to effectively address separation challenges. Additionally, ChemSep can function as a standalone tool or be integrated into any CAPE-OPEN compliant flowsheeting software, taking advantage of the relevant thermodynamic and physical property data to optimize its performance. Ultimately, this flexibility makes ChemSep an invaluable asset for engineers and researchers in the field of chemical separation processes.

Utilizing the iMODELER can provide valuable insights, revealing the intricate connections between various elements and enhancing your cognitive capabilities in addressing complex challenges, ultimately leading to greater success. This innovative tool introduces a groundbreaking method for visualizing and analyzing complexity through its distinctive Insight Matrix, which facilitates improved planning, decision-making, and communication. Additionally, the iMODELER supports quantitative modeling of scenarios, such as system dynamics, empowering users to "imodel" diverse areas including politics, economics, management practices like systemic change management, complex projects through systemic project management, strategy development, process optimization, family dynamics, and work-life balance. By leveraging these features, you will be better equipped to anticipate future developments and determine the most effective strategies for achieving your goals. The iMODELER stands to transform the way you engage with complexity, making it an indispensable tool for anyone looking to excel in their endeavors.

The rise in variants, characterized by a preference for batch sizes of one, accelerated product life cycles, and intense cost pressures, underscores the essential role of digital twins across numerous sectors in today's digital era. ISG Industrielle Steuerungstechnik GmbH boasts extensive expertise in developing simulation solutions that provide notable competitive advantages for clients in the mechanical and plant engineering industries. With the introduction of the latest ISG-virtuos 3, this simulation platform expands its capabilities to include manufacturing automation and intralogistics as well. ISG-virtuos serves as an open, collaborative simulation platform that enables the thorough examination and optimization of entire production systems, encompassing all elements such as controls, robots, and material handling in real-time with a deterministic approach. The simulations leverage virtual components that are stored in dedicated libraries, allowing for their continuous reuse and interchangeability, thus enhancing efficiency and flexibility in production processes. This innovative approach not only streamlines operations but also positions companies to better adapt to the ever-evolving market demands.

Complex technical systems, such as machinery and manufacturing facilities, are characterized by their intricate nature, as they include a wide array of components and subsystems drawn from various technical fields and are increasingly equipped with sensors and control mechanisms. The interactions among these components play a crucial role in influencing safety, efficiency, and user comfort. SimulationX provides a unified platform for the modeling, simulation, and analysis of these technical systems, covering areas like mechanics, hydraulics, pneumatics, electronics, controls, and various physical behaviors including thermal and magnetic effects. With extensive libraries of components that feature application-specific model elements, you can easily access the necessary tools tailored to your project requirements, making the process more streamlined and effective. This versatility allows for thorough examination and optimization of complex systems across multiple disciplines.

Equalis offers an extensive array of products and deployment knowledge, encompassing everything from modeling and simulation for product development to infrastructure for testing and development. We deliver complete systems that refresh product development physics models automatically using test data, which significantly reduces both the time and cost associated with product development. Our testing and development expertise includes a diverse range of applications, such as high-speed and high-power rotating machines, mass flow chambers, and large vehicle tilt tables. Additionally, our simulation models for intricate systems are designed to autonomously learn and enhance various forms of data, ensuring that our clients benefit from continuous improvement in their processes. This innovative approach allows us to stay at the forefront of technology in product development.

Simpack is a versatile multibody system simulation (MBS) software that allows engineers and analysts to model and simulate the complex non-linear movements of various mechanical and mechatronic systems. This tool empowers users to create and analyze virtual 3D representations, facilitating the prediction and visualization of dynamic behaviors, along with associated forces and stresses. While primarily utilized in sectors such as automotive, engine, HIL/SIL/MIL, power transmission, railway, and wind energy, its applications extend across all fields of mechanical engineering. Notably, Simpack excels in conducting high-frequency transient analyses, including those in the acoustic range, making it a valuable asset for engineers. Originally designed to address intricate non-linear models featuring flexible bodies and severe shock interactions, Simpack continues to evolve to meet the demands of modern engineering challenges. Its adaptability ensures that a wide array of engineering problems can be effectively tackled using this advanced simulation tool.

ProModel serves as a powerful tool for discrete event simulation and predictive analytics, offering insight into your most challenging decision-making scenarios. By utilizing ProModel's AI simulation software, you can enhance system performance while minimizing associated risks. Our solutions are grounded in data and cater to industries that demand accurate planning and forecasting to maintain seamless and efficient operations. Understanding the implications of operational changes on production and scheduling is crucial for both the present and future. With our AI simulation software, organizations can effectively design, simulate, and optimize factory layouts through digital twins, rapidly predict patient numbers and bed usage, identify potential bottlenecks, and improve capacity planning and scheduling, thereby enhancing production flows. Harness the power of dynamic simulation models for superior process management and utilize visual insights to pinpoint the origins and reasons for bottlenecks, ensuring a streamlined approach to operations. This comprehensive tool not only aids in strategic foresight but also fosters a culture of continuous improvement within your organization.

Sentaurus Process serves as a sophisticated simulator in one, two, and three dimensions, specifically designed for the advancement and fine-tuning of silicon semiconductor process technologies. This next-generation tool effectively tackles the complexities associated with both contemporary and forthcoming process technologies. Featuring an array of cutting-edge process models, including standardized parameters that have been calibrated using data from equipment manufacturers, Sentaurus Process offers a robust framework for accurately simulating a diverse spectrum of technologies, ranging from nanoscale CMOS to expansive high-voltage power devices. Additionally, it integrates seamlessly into a complete suite of essential TCAD products, facilitating multi-dimensional simulations of processes, devices, and systems through an intuitive user interface. With its capabilities for rapid prototyping, development, and optimization, Sentaurus Process enables extensive physics-based process modeling. Furthermore, it allows for the enhancement of device performance by carefully optimizing the thermal and mechanical stress within process structures, accounting for historical stress factors. In this way, Sentaurus Process not only addresses current needs but also prepares users for future technological advancements.

Analytic Solver Optimization is fully compatible with the Excel Solver, designed to tackle any conventional optimization issue, regardless of its size or type, without accommodating uncertainty. What sets it apart from other optimization tools is its ability to conduct an algebraic analysis of your model's structure while efficiently utilizing multiple cores on your computer for enhanced performance. This software can manage nonlinear models that are ten times larger and linear models that are forty times larger than those solvable by the Excel Solver, providing solutions at a significantly faster pace, along with the capability to integrate Solver Engines that can accommodate millions of variables. Additionally, Analytic Solver Simulation offers an intuitive interface for rigorous Monte Carlo simulations, risk analysis, decision trees, and simulation optimization, all powered by Frontline's sophisticated Evolutionary Solver. It features an impressive array of 60 probability distributions, including complex compound distributions, automatic fitting for these distributions, along with rank-order and copula-based correlations, plus 80 different statistics and risk measures, and tools for Six Sigma analysis, as well as multiple parameterized simulations that enhance decision-making processes. The comprehensive functionality of this software makes it an essential tool for professionals seeking to leverage advanced optimization and simulation techniques in their work.

In industries where the integrity of welded structures is critical, TRANSWELD® provides a cutting-edge and comprehensive solution for predicting potential welding imperfections. This advanced simulation software employs multi-physical models to accurately reflect the actual behavior of metal in both liquid and mushy phases, enabling an in-depth analysis of material transformations. Furthermore, TRANSWELD® facilitates the examination of the microstructure in solid-state assemblies. With this tool, you can ensure that your welded components meet required standards without the need for physical prototypes. Our software is entirely predictive, allowing users to digitally observe welding processes under realistic conditions. For instance, it enables the visualization of the heat source movement during simulations of techniques such as laser welding or arc welding, enhancing understanding and efficiency in the welding process. Such capabilities not only streamline production but also significantly reduce the risk of defects in the final product.

ProSimPlus is a chemical simulation software that is intuitive and easy to use. Users can quickly get used to it. This software is used by many of the world's most prominent oil, gas, chemical, energy, or bio-based companies.

Eliminate uncertainty in your decision-making process by confidently utilizing Arena software. This simulation tool allows you to create a digital twin, leveraging historical data while being validated against the actual outcomes of your system. Arena™ Simulation Software predominantly employs the discrete event method for its simulations, but users will also discover features that cater to flow and agent-based modeling. By assessing various alternatives, you can identify the most effective strategies for enhancing performance. Gain insights into system performance through critical metrics such as costs, throughput, cycle times, equipment utilization, and resource availability. Mitigate risks by thoroughly simulating and testing process modifications prior to making substantial capital or resource commitments. Additionally, you can analyze how uncertainty and variability influence overall system performance. Running "what-if" scenarios allows you to critically evaluate the implications of proposed changes to your processes. This comprehensive approach ensures that decisions are made with confidence and precision.

The sixth-generation DYNAFORM Die Simulation Software presents an advanced platform that boasts a user-friendly and visually appealing interface designed for ease of use. Focused on the stamping process, this software minimizes the need for extensive CAE expertise and simplifies geometry and element tasks. Among its notable enhancements, users will find a well-structured tree management system for operations, a dedicated simulation data manager, and customizable icon groupings for quick access to drop-down menu features. Additionally, it offers distinct applications that operate independently, integrated pre- and post-processing capabilities, a multi-window view for better analysis, and the convenience of accessing functions with right-click options. Supporting large-scale forming simulations, the software includes a geometry management tool, a process wizard for optimizing blank sizes, a comprehensive material library, new draw bead shapes, and an efficient coordinate system manager. The combination of these features enhances the overall simulation experience, making it a powerful tool for engineers and designers alike.

FORUM8's VR-Design Studio software is utilized by numerous research institutions, city planners, transportation agencies, and automotive manufacturers across the globe to develop highly immersive and lifelike representations of built environments. This interactive 3D VR simulation and modeling application allows users to manipulate three-dimensional spaces dynamically, conduct an unlimited number of driving simulation experiments, import and modify CAD files, construct and texture models, and automatically generate roads, tunnels, and bridges, facilitating the creation of various design options in real-time, whether online or offline. The finished models empower users to visualize and engage with the virtual environments they have built, which aids in assessing the potential environmental consequences of proposed projects, including their effects on pedestrian and vehicle traffic patterns. This collaborative approach enhances stakeholder engagement throughout the planning process, ensuring that diverse perspectives are considered. Ultimately, VR-Design Studio serves as a vital tool for fostering innovation and improving decision-making in urban development projects.

Utilizing the distinctive and inherently dynamic Lattice Boltzmann-based physics, the PowerFLOW CFD solution conducts simulations that effectively replicate real-world scenarios. With the PowerFLOW suite, engineers can assess product performance at the early stages of design, before any prototypes are constructed—this is when alterations can have the most substantial effects on both design and budget. The PowerFLOW system seamlessly imports intricate model geometries and conducts aerodynamic, aeroacoustic, and thermal management simulations with high accuracy and efficiency. By automating domain discretization and turbulence modeling along with wall treatment, it removes the need for manual volume meshing and boundary layer meshing. Users can confidently execute PowerFLOW simulations using a large number of compute cores on widely utilized High Performance Computing (HPC) platforms, enhancing productivity and reliability in the simulation process. This capability not only accelerates product development timelines but also ensures that potential issues are identified and addressed early in the design phase.

Vensim®, the software of choice of thousands of analysts and consultants worldwide, is used to build high-quality simulations in business, scientific and environmental systems. Vensim integrates a powerful set of tools to develop, test, interpret, and distribute models. These tools include cause and effect diagramming, graphical or textual model constructions, easy reproductions of model structure by using subscripts and arrays, Monte Carlo sensitivity analyses, optimization, data management, and application interfaces. Additional features allow for advanced model resolution and fidelity. Vensim uses patented techniques for error detection, prevention, and rapid understanding of complex results.

ProModel is a cutting-edge discrete-event simulation tool designed to facilitate the planning, design, and enhancement of both new and existing systems in manufacturing, logistics, and various operational areas. This technology enables users to create accurate representations of real-world processes, capturing their natural variability and interconnectedness, which is essential for effective predictive analysis of potential modifications. By focusing on key performance indicators, you can optimize your system's performance. The software allows for the creation of an animated, interactive model of your business environment derived from CAD files, process maps, or Process Simulator models, providing a clear visualization of processes and policies in motion. This visualization aids in brainstorming sessions, where you can explore potential adjustments and devise scenarios to test improvements aimed at meeting business goals. Additionally, you have the capability to run multiple scenarios concurrently and analyze their outcomes using the Output Viewer, which is built on advanced Microsoft® WPF technology, enhancing the decision-making process. This comprehensive approach to simulation not only aids in immediate problem-solving but also fosters long-term strategic planning and innovation.

ProModel is an advanced discrete-event simulation tool that facilitates the planning, design, and enhancement of both new and existing manufacturing, logistics, and various operational systems. It allows you to accurately model real-world processes along with their natural variability and interdependencies, enabling thorough predictive analyses of potential modifications. By focusing on your key performance indicators, you can optimize your system effectively. You can generate a dynamic, animated model of your operational environment using CAD files, process maps, or Process Simulator models. This visualization helps you to clearly observe and comprehend the functioning of current processes and policies. Additionally, you can utilize the model for brainstorming sessions to pinpoint possible changes and formulate scenarios to evaluate improvements aimed at meeting your business goals. Each scenario can be executed independently, allowing you to contrast their outcomes using the Output Viewer, which is built on the latest Microsoft® WPF technology. This comprehensive approach ensures that your operational decisions are data-driven and strategically sound.

SpectreUQ™ enhances the advanced DAKOTA software created by Sandia National Laboratories by incorporating a user-friendly wizard that assists engineers throughout the uncertainty quantification (UQ) process. The intricate details of the UQ method are managed seamlessly in the background. It employs a database to systematically organize results from both experiments and simulations, along with offering interactive visualization and graphing capabilities. Available through an annual subscription without any limits on the number of users, it also comes in source code format. Unlike many other techniques, SpectreUQ™ operates in a non-intrusive manner, allowing it to run alongside existing simulations rather than integrating directly within them. Users can leverage their own high-performance computing resources to assess numerous flight conditions and develop the built-in surrogate models. It is designed to be intuitive and user-friendly, having been refined through extensive real-world applications in UQ studies. The process of incorporating experimental data and computational fluid dynamics (CFD) results is guided by the Oberkampf-Roy method, ensuring a robust approach. Additionally, the interactive plots generated facilitate easy exploration and sharing of results, enhancing collaboration and communication among engineers. This comprehensive capability makes SpectreUQ™ a valuable tool for any engineer looking to integrate UQ into their workflow.

ENCY Tuner simulates NC-code on the shop floor to optimize, validate and fine-tune G-codes for CNC machines and industrial robotics. It allows operators and programmers the ability to simulate machining processes, edit NC code, and reengineer legacy codes for modern equipment. Highlights: - G-code machining simulation at the cutting edge - Flexible NC code editing - NC program reengineering Support for CNC machines, robots - Detection and correction of collisions and errors Virtual Setup Tool Management - A wide selection of postprocessors, interpreters and translators - Direct installation capability in CNC controllers ENCY Tuner allows users to achieve error-free machining and streamline code adjustments. It also validates production-ready NC codes directly on the shopfloor.

Ansys Lumerical FDTD stands as the premier choice for simulating nanophotonic devices, processes, and materials. Its integrated design environment features robust scripting capabilities, sophisticated post-processing options, and optimization routines. This meticulously refined application of the FDTD method ensures exceptional solver performance across a wide range of applications. With these tools at your disposal, you can concentrate on the creative aspects of your design while relying on the software to handle the technical complexities. The platform offers a variety of advantages that facilitate flexible and customizable modeling and simulation. By leveraging Ansys Lumerical FDTD, you can effectively model nanophotonic devices, processes, and materials, thus empowering your innovative pursuits. Ultimately, Lumerical FDTD exemplifies excellence in the field, delivering dependable, powerful, and scalable solver performance tailored to meet diverse application needs.

Simcenter Amesim, the most integrated and scalable platform for system simulation, allows system engineers to simulate and optimize mechatronic system performance. This will increase overall system engineering productivity, from the initial development stages to the final performance validation and controls calibration. Simcenter Amesim is a combination of ready-to-use multiphysics libraries and industry-oriented solutions. It supports powerful platform capabilities that allow you to quickly create models and perform analysis. This open environment can be easily integrated with major computer-aided designing (CAD), computer-aided engineering and controls software packages.

Collimator is a simulation and modeling platform for hybrid dynamical system. Engineers can design and test complex, mission-critical systems in a reliable, secure, fast, and intuitive way with Collimator. Our customers are control system engineers from the electrical, mechanical, and control sectors. They use Collimator to improve productivity, performance, and collaborate more effectively. Our out-of-the-box features include an intuitive block diagram editor, Python blocks for developing custom algorithms, Jupyter notebooks for optimizing their systems, high performance computing in cloud, and role-based access controls.