Alternatives to TRANSWELD

Azore is software for computational fluid dynamics. It analyzes fluid flow and heat transfers. CFD allows engineers and scientists to analyze a wide range of fluid mechanics problems, thermal and chemical problems numerically using a computer. Azore can simulate a wide range of fluid dynamics situations, including air, liquids, gases, and particulate-laden flow. Azore is commonly used to model the flow of liquids through a piping or evaluate water velocity profiles around submerged items. Azore can also analyze the flow of gases or air, such as simulating ambient air velocity profiles as they pass around buildings, or investigating the flow, heat transfer, and mechanical equipment inside a room. Azore CFD is able to simulate virtually any incompressible fluid flow model. This includes problems involving conjugate heat transfer, species transport, and steady-state or transient fluid flows.

SimSolid is the revolutionary simulation technology for engineers, designers, and analysts. It performs structural analyses on fully-featured CAD assemblies in minutes. SimSolid eliminates geometry preparation, meshing, and other errors that are time-consuming and difficult to perform in conventional structural simulations. Multiple design scenarios can be simulated quickly under real-life conditions. You can use any CAD model, even an early one. SimSolid tolerance for imprecise geometry means SimSolid simulation tools don't need to be simplified before analyzing designs. SimSolid supports all types of connections (bolt/nuts, bonded, rivets and sliding) and analysis for linear static, modal, and thermal properties. It also supports complex coupled, nonlinear, dynamic effects.

Ansys MotorCAD is a dedicated tool for electric machine design. It allows you to quickly simulate multiphysics across the entire torque-speed operating range. Motor-CAD allows engineers to evaluate motor topologies across the entire operating range. This allows them to create designs that are optimized for size, efficiency, and performance. Motor-CAD software's four modules, Emag, Therm Lab, Mech, allow multiphysics calculations to be performed quickly, iteratively, and users can move from concept to final design in a shorter time. Motor-CAD users can explore more motor topologies and fully evaluate the impact of advanced loss effects during the initial stages of an electrical mechanical design with Motor-CAD's streamlined data input process. This release features powerful new features for design optimization and multi-physics analysis, as well as system modeling for electric motors. Multiphysics simulations are fast across the entire torque-speed range.

Your designs can be tested under real-world conditions to improve product quality and reduce prototyping and testing costs. SOLIDWORKS®, Simulation is a simple-to-use suite of structural analysis tools that uses Finite Element Analysis to predict a product’s real-world physical behavior. This can be done by virtually testing CAD models. The portfolio offers dynamic, static, and linear analysis capabilities. SOLIDWORKS Simulation Professional allows you to optimize your design, determine product mechanical resist, product durability, and test heat transfer instabilities and buckling instabilities. It can also perform multi-physics sequential simulations. SOLIDWORKS Simulator Premium allows you to efficiently evaluate your designs for dynamic response, nonlinear, and composite materials. SOLIDWORKS Simulation Premium offers three advanced studies: Nonlinear Dynamic, Linear Dynamics, and Non-Linear Static.

FLOW-3D is a highly accurate CFD software that solves transient, free-surface issues. It can help you optimize product designs and reduce time to market. FLOW-3D's multiphysics suite also includes FlowSight, our state-of the-art postprocessor. FLOW-3D is a versatile CFD simulation platform that engineers can use to study the dynamic behavior liquids and gases in a variety of industrial applications and physical processes. FLOW-3D is a free surface and multiphase simulation platform that serves a wide range of industries, including aerospace, microfluidics and bio-medical devices as well as water civil infrastructure and automotive. FLOW-3D is a multiphysics tool that is unique in its power and versatility. It helps engineers achieve their modeling goals.

Multiphysics software from COMSOL allows you to simulate real-world designs, processes, and devices. Multipurpose simulation software that uses advanced numerical methods. Fully coupled multiphysics and single physics modeling capabilities. The entire modeling process, from geometry to postprocessing. Easy-to-use tools for creating and deploying simulation applications. The COMSOL Multiphysics® software provides a consistent user interface regardless of engineering application or physics phenomena. Add-on modules offer specialized functionality for electromagnetics and structural mechanics. You can choose from a variety of LiveLink™, products to interface with CAD or other third-party software. COMSOL Server™ and COMSOL Compiler™, allow you to deploy simulation applications. This software platform allows you to create simulation applications and physics-based models.

FEATool Multiphysics – "Physics Simulator Made Easy" – a fully integrated physics simulation, FEA and CFD toolbox. FEATool Multiphysics provides a fully integrated simulation platform that includes a unified user interface for several multi-physics solvers such as OpenFOAM and Computational fluid dynamics (CFD), including SU2 Code and FEniCS. This allows users to model coupled physics phenomena, such as those found in fluid flow and heat transfer, structural, electromagnetics acoustics and chemical engineering applications. FEATool multiphysics is a trusted tool for engineers and researchers in the energy, automotive and semi-conductor industries.

Metariver Technology Co., Ltd. develops innovative and creative computer-aided engineering (CAE) analysis S/W based upon the most recent HPC technology and S/W technologies including CUDA technology. We are changing the paradigm in CAE technology by using particle-based CAE technology, high-speed computation technology with GPUs, and CAE analysis software. Here is an introduction to our products. 1. Samadii-DEM: works with discrete element method and solid particles. 2. Samadii-SCIV (Statistical Contact In Vacuum): working with high vacuum system gas-flow simulation. 3. Samadii-EM (Electromagnetics) : For full-field interpretation 4. Samadii-Plasma: For Analysis of ion and electron behavior in an electromagnetic field. 5. Vampire (Virtual Additive Manufacturing System): Specializes in transient heat transfer analysis.

Simcenter STAR -CCM+ is a multiphysics fluid dynamics (CFD), software that simulates products under real-world conditions. Simcenter STAR–CCM+ is a unique CFD simulation toolkit that allows for automated design exploration and optimization. This integrated environment contains everything you need, including CAD, automated meshing and multiphysics CFD. It also includes sophisticated postprocessing and design exploration. Engineers can efficiently explore the entire design space and make better design decisions quicker. Simcenter STAR -CCM+ provides additional insight that can be used to guide your design process, resulting in more innovative products that meet customer expectations.

OnScale is the original Cloud Engineering Simulation platform. It combines multiphysics solver technology and the unlimited compute power of cloud supercomputers to create a powerful platform for Cloud Engineering Simulation. OnScale allows engineers to run large numbers of full 3D multiphysics simulaions simultaneously. This allows them to create digital prototypes of high-tech devices. These digital representations can be used to capture the entire behavior of the device within its operating envelope. OnScale Solve is a cloud-based engineering simulation that provides a powerful, easy-to-use, and effective experience. OnScale Solve can run on both public and private cloud supercomputers. It includes a web-based UI, API to integrate into any design workflow, scripting language to customize engineering simulations and plugins to improve its modeling capabilities. OnScale Solve provides engineers with the ability to simulate data and train advanced AI/ML algorithms.

DigitalClone for Additive Manufacturing (DCAM) is a comprehensive suite of metal additive manufacturing simulation and modeling capabilities that allows for seamless design and analysis support. DC-AM uses a multiscale, multi-physics analysis approach to link the process - microstructure and fatigue relationship of additively produced parts to enable computational assessment for quality and performance. DC-AM encourages the adoption of AM in safety-critical sectors by providing unprecedented insight into build conditions and the characteristics and final parts. This allows for a reduction in time and cost, as well as allowing for a reduction in the time and costs required to qualify parts.

SwiftComp is a multiscale, multiphysics composite sim code that delivers 3D FEA accuracy at the speed of simple engineering models. SwiftComp makes it possible for engineers to model composites as easily and accurately as metals using traditional structural elements in their FEA codes. This allows them to capture all the microstructural details while preserving accuracy. SwiftComp enables unified modeling of 1D (beams), 2D(plates/shells) or 3D structures. This allows for the calculation of all the effective properties. SwiftComp can be used independently to simulate composite testing or as a plug in to your existing structural tools that support high-fidelity composites modeling. SwiftComp can calculate the best structural model to use in macroscopic structural analysis and perform dehomogenization in order to compute the pointwise stresses within the microstructure. SwiftComp interfaces directly with ABAQUS and ANSYS.

Energy2D, a multiphysics simulation program based on computational physics and combining particle dynamics, models all three modes for heat transfer: conduction, convection and radiation. Energy2D runs fast on most computers, eliminating the need to switch between preprocessors and solvers and postprocessors that are usually required for computational fluid dynamics simulations. It allows you design "computational experiment" to test a hypothesis or solve a problem in engineering without resorting complex mathematics. There are also plans to support different fluid types and incorporate other types energy transformations. Energy2D's conduction is very accurate, but its convection and radioactivity parts are not. Energy2D should therefore be considered qualitative in cases involving convection and/or radiation. Energy2D has been used in more than 40 scientific publications.

Adaptive Research is pleased announce the immediate release CAESIM 2024, a simulation platform that provides advanced computational fluid dynamics modeling capabilities with multi-physics capabilities. The new release of software provides new tools and features that optimize the modeling process, and provide CFD engineers with fast simulation solutions.

CFD is the only comprehensive, intuitive platform available for multidisciplinary design. Computational Fluid Dynamics (CFD) is a multiphysics system analysis technique that simulates fluid behavior and thermodynamic properties by using numerical models. Engineers can use the Cadence Fidelity CFD Platform to reduce the time and cost of physical testing for design processes such as propulsion and aerodynamics. The Fidelity CFD Platform is an end-toend CFD solution that is easy to use for multidisciplinary design, optimization, and other applications in the aerospace, automotive turbomachinery and marine industries. The platform's streamlined workflows and massively parallel architecture along with state-of-the art solver technology provide unprecedented performance and accuracy for today's design problems.

VSim is the Multiphysics Simulator Software that design engineers and researchers use to solve difficult problems. VSim's unique combination Finite-Difference Time Domain (FDTD), Particle in Cell (PIC) and Charged Fluid(Finite Volume), delivers accurate results in a variety situations, including plasma modelling. VSim is a parallel software program that can efficiently solve large scale problems. Simulations are run quickly using algorithms for high-performance computing systems. Trusted by researchers from 30 countries and used by engineers in a variety of industries, including aerospace and semiconductor manufacturing, VSim delivers results that are reliable. Tech-X's code was created by a group of computational scientists. VSim is available at many of the top research institutions around the world.

EMWorks offers the best-in-class electromagnetic simulation software to support electrical and electronic design. It also has multiphysics capabilities. The company's products can be seamlessly integrated in Autodesk Inventor® and SOLIDWORKS. Applications include power electronics, antennas and RF components, signal integrity and power of high speed interconnects, and electromechanical and power electronics. EMS is an electromagnetic field simulation program that can be used to optimize electromagnetic and electromechanical devices, such as transformers and electric motors, actuators and sensors within Autodesk®, and Inventor®.

nCode DesignLife is an online design tool that identifies key locations and calculates realistic fatigue life from leading finite element results for metals and composites. Designers can do more than simple stress analysis. They can simulate actual loading conditions and avoid costly design changes. Products can include functions for fatigue of welds and vibration fatigue, crack growth detection, fatigue in composites, and thermo-mechanical fatigue analysis. Advanced technology for multiaxial, vibration, crack growth and thermo-mechanical fatigue. A graphical interface that makes it easy to perform fatigue analysis using the most popular FEA results data such as ANSYS, Nastran and Altair OptiStruct. Multi-threaded and distributed processing capabilities to process large finite element models as well as complete usage schedules.

Ansys Totem SC is the industry's trusted leader in power noise and reliability signoffs for analog and mixed signal designs that are built on cloud-native elastic computing infrastructure. Ansys Totem SC is the industry's most trusted standard for voltage drop and electromigration multiphysics signoff solutions for transistor-level and mixed signal designs. Totem-SC has a proven track record of thousands upon thousands of tapeouts. Its cloud-based architecture gives it speed and capacity to handle full-chip analyses. All major foundries have certified signoff accuracy for all finFET nodes below 3nm. Ansys Totem SC is a transistor level power noise and reliability analysis platform that can analyze analog mixed-signal IP as well as fully custom designs. It generates IP models for RedHawk SC-level power integrity signoff and compact chip models for power delivery networks at the chip- and system-level. Industry-proven, foundry-certified analog/mixed-signal EM/IR solution.

Visual Components offers comprehensive Robot Offline Programming software to streamline and accelerate the programming of industrial robotics across brands and applications. The platform allows users to create, simulate and validate robot programs within a virtual environment. This reduces the need for physical prototyping and minimizes production downtime. Key features include realistic simulation capabilities and detailed visual graphics. They also support over 18 post-processors as well as 40+ robot controllers. The software's intuitive interface allows for efficient programming and quick learning, even when complex layouts are involved.

Welding coordinator is a customizable management software for welding fabrications that can be customized to increase efficiency and ensure traceability across an organization. It allows for the automatic updating of records for welder qualifications, allowing users to identify qualified and appropriate welders. The software generates detailed progress and productivity reports that include key variables for each welding, defect analysis, engineering information, production and quality control details. It also produces important production information such as welding procedure qualifications numbers, welder identifications, and welding date. The welding coordinator streamlines the creation 'end-of-manufacturing' reports by automatically combining project data books, weld sheets, PQRs and WPQs as well as NDE/NDT report. The platform allows for complete traceability, from design to sign-off. It can be customized to meet organizational needs.

This prefabrication tool goes beyond analysis, allowing you to seamlessly link with any procurement software. Include delivery times in the prefabrication process to ensure you are always working with current information. Optimize your production processes to ensure maximum efficiency. Tracking tool to streamline warehouse management on your construction site. Reduce waste while keeping track of tools, equipment, and materials. By ensuring that all materials and equipment are at the correct location at the right time, you can keep your construction project on track and within budget. Weld Management Tool that takes weld management up a notch! Monitor every aspect of welding, from tracking welds to managing NDT. A state-of-the art tracking system will help you achieve high-quality results and maintain safety standards while providing valuable insights into your welding operation.

Siemens RobotExpert is an easy-to-use, 3D simulation software and offline programming tool designed to optimize robotic operations in various industries. It allows the design and simulation in a virtual environment of complete workcells, allowing the optimization of robot path and validation of manufacturing processes. The key features include intuitive simulations tools, accurate cycle times analysis, collision detection and support for multiple brands and configurations of robots. RobotExpert allows for seamless integration into existing manufacturing systems. This increases productivity and reduces time-to-market. Its flexibility makes the software suitable for applications like arc welding and assembly. It is also ideal for painting, material handling, and painting. RobotExpert provides a virtual commissioning platform that helps identify and resolve potential issues early in design phase. This reduces costly errors and downtime.

An online weld tracking and material tracking system for small to medium sized organizations that need to track and trace all aspects of their fabrication needs. This module can be configured for multiple sub-contracting fabricators. This allows for the complete tracking of each subcontractor's fabricated information and allowing for their amalgamation. The system allows you to analyze and report in detail all stages of your fabrication or assembly process. It records, monitors, tracks, reports on materials and welds used and allocates them for quality audit and assurance purposes. This system can be used from anywhere on the shop floor or remotely via web-enabled devices. It allows you to track and report in real time, 24 hours a days, 7 days a week.

C-spec WeldOffice WPS, a comprehensive software for welding procedures, automates the creation of Welding Procedure Specifications and Procedure Qualification Records. This ensures compliance with the latest ASME Section IX code requirements and AWS D1.1. The software includes automatic code checking supported by ASME, AWS and ISO committee members. This gives users confidence in their welding procedures' code compliance. It supports multiple codes such as ASME, ISO 15614 and AWS B2.1. It also accommodates multiple welding procedures, including SMAW and GTAW. The software includes a database of more than 5,800 base and filler metals, as well as preheat and heat treatment tables based on ASME and AWS standards.

Integrate COMSOL Multiphysics®, with MATLAB®, to extend your modeling and scripting programming within the MATLAB environment. LiveLink™, for MATLAB®, allows you to harness the power of MATLAB's toolboxes and preprocessing, modeling manipulation, and postprocessing. Multiphysics simulations can be used to enhance your MATLAB code. Your geometry modeling should be based on probabilistic or image data. Multiphysics models can be combined with Monte Carlo simulations or genetic algorithms. To incorporate COMSOL models into control systems, export COMSOL models in state-space matrix format. The COMSOL Desktop®, interface allows you to use MATLAB®, functions while modeling. To parameterize the geometry, physics or solution scheme, you can manipulate your models using the command line or script.

FANUC ROBOGUIDE, a leading offline simulation and programming software for FANUC Robots, allows users to create, simulate, and program robotic work cells without the need for physical prototyping. This software family includes packages that are tailored to specific applications, such as material handling, palletizing, painting and welding. ROBOGUIDE reduces costs and risks by optimizing single- and multirobot work cell layouts using virtual robots and models of work cells. This approach allows for accurate cycle time calculation, reachability checks and collision detection. It ensures the feasibility and efficiency robot programs and cell designs. ROBOGUIDE also supports CAD-to path programming, conveyor line tracker, and machine models, which enhances the precision and flexibility in robotic operations.

FASTSUITE 2 Edition is a comprehensive solution that allows the simulation and programming industrial robots and machines in a virtual 3D environment. Offline programming allows manufacturers to create, analyze, and simulate various manufacturing processes, without interrupting production. This approach maximizes production by minimizing downtime for expensive production equipment and personnel. The software supports many manufacturing technologies including arc weld, laser cutting and painting, spraying and coating. It offers technology-specific software packages that offer optimized strategies and methods tailored to each process. This ensures consistently high program quality, regardless of the robot type or programming experience of the users. As a manufacturer-independent platform, FASTSUITE provides interfaces to all common robot and system manufacturers.

Ansys SPEOS predicts how systems will perform in terms of illumination and optical performance. This saves prototyping time, costs, and improves product efficiency. Ansys SPEOS offers a user interface that is intuitive and comprehensive, enhanced productivity through the use of GPUs to preview simulations and easy access into the Ansys multiphysics ecosystem. The International Commission on Illumination has evaluated SPEOS against CIE 171-2006 test cases. This assessment evaluates the accuracy of light modeling software, and shows the performance benefits of Ansys SPEOS. You can intuitively explore the propagation and light in 3D by turning on the light in the virtual model. SPEOS Live preview functions allow you to design products interactively by combining simulation and rendering capabilities. You can reduce iteration time and speed-up your decision-making by performing simulations correctly, automatically designing optical surfaces, light guides, and optical lenses.

samadii/em oftware that analyzes and calculates the electromagnetic field in 3d space using the Maxwell equation using vector FEM ad GPU computing. it provides electrostatics, magnetostatics as well and induction electronics, including the low-frequency and high-frequency ranges. samadii/em provides a multi-physics approach and high-performance electromagnetics simulation, with Samadii you can quickly address problems from semiconductors and displays to wireless communications, etc.

ENCY Robot is an offline programming solution (CAD/CAM/OLP). It offers precision toolpath calculations, digital twin creation and advanced kinematics management for a variety of robotic processes including milling and welding, painting, additive manufacture, and pick-and place operations. Highlight: - A complete package that includes design, technology setup and toolpath calculation. - Support robots of any kinematics - Robot Kinematics Optimization for Singularity Avoidance and Collision Free Movements - Digital twin builder with zero-code for robotic cells - High-quality 3D robot models and postprocessors pre-defined by top brands ENCY Robot allows users to safely and effectively design and simulate robotic operations. This increases productivity and reduces manual intervention in complex production environments.

BIMPro is design automation software that can be used by fast-paced electrical, mechanical, and plumbing contractors. It increases design quality, eliminates bores of dimensioning, and improves productivity by up to 10x. BIMPro's rule-based technology allows users to automate fabrication spool and sheet creation, hanger placements, point layouts, shop drawings, and many other tasks. Auto Spool quickly creates assemblies using construction logic. It also uses project parameters to ensure that the work done in the shop is consistent with the field. DYI Spool Sheets makes it easy to automate the placement of views and dimensions, tags, as well as other tasks. BIMPro MEP can automate the placement of dimensions on 3D views and Weld Mapping. BIMPro MEP automates tedious tasks like correctly placing hangers throughout a model. This empowers design teams. Automate point placement and reporting to collaborate with layout teams on the ground.

NVIDIA Modulus, a neural network framework, combines the power of Physics in the form of governing partial differential equations (PDEs), with data to create high-fidelity surrogate models with near real-time latency. NVIDIA Modulus is a tool that can help you solve complex, nonlinear, multiphysics problems using AI. This tool provides the foundation for building physics machine learning surrogate models that combine physics and data. This framework can be applied to many domains and uses, including engineering simulations and life sciences. It can also be used to solve forward and inverse/data assimilation issues. Parameterized system representation that solves multiple scenarios in near real-time, allowing you to train once offline and infer in real-time repeatedly.

Mesh can affect the speed, accuracy, convergence, and speed of a simulation. Ansys offers tools to create the best mesh for precise, efficient solutions. Ansys is a general-purpose, high-performance, intelligent, automated meshing software that produces the best mesh for precise, efficient multiphysics solutions. It can be used to create simple, automatic meshing or highly crafted mesh. Smart defaults are integrated into the software to make meshing easy and intuitive. They deliver the required resolution to properly capture solution gradients for reliable results. Ansys offers a variety of meshing options, from automated meshing to hand-crafted meshing. There are many options available for meshing high-order elements to linear elements, fast tetrahedrals and polyhedrals to high-quality hexagonal and mosaic. Ansys meshing capabilities reduce time and effort required to achieve accurate results.

Advance Steel is a Dedicated Steel detailing program. The Software tool is a 3D modeling environment that can then be translated into a document management software. The 3D model is composed of intelligent structural objects like Bolts, Bolts, and Beams. These can be combined using the Parametric Connection tools. This allows the model to become the hub for the creation and propagation of general Arrangements, Shop Assembly, and Part drawings. These tools can also be used to create complex folded plates details for flat pattern development drawings. You can create steel frameworks using intelligent macros. These tools allow you to adjust the overall frame dimensions and section profile selection. This is combined with the Parametric connector's tools for standard connection types. You can also create custom connections for specific situations.

Simufact welding is a modular product line that provides extensive functionality for modeling the elastic-plastic behavior and structural weld simulation. The software can be used to simulate different welding processes. Simufact Welding allows you to simulate a wide variety of thermal joining processes using structural welding simulation. This includes brazing, arc and beam welding processes. Simufact Welding also allows you to model heat treatment, variations of cooling, unclamping setups, and mechanical loading of welded structures.

Ansys RedHawk SC is the industry's most trusted standard for voltage drop and electromigration multiphysics sign off solutions for digital designs. Its powerful analytics quickly detect weaknesses and allow for what-if explorations to optimize power efficiency and performance. Redhawk-SC's cloud-based architecture allows it to perform full-chip analysis. All major foundries have certified signoff accuracy for all finFET Nodes down to 3nm. Ansys RedHawk SC enables robust digital designs that are low-power and perform well. This is possible thanks to advanced power analytics which give designers detailed techniques to detect and correct dynamic voltage drops. Ansys RedHawk SC's trusted multiphysics signingoff analysis is a powerful tool to reduce technology and project risk. RedHawk's algorithms have been proven to be accurate by all major finFET process foundries and are certified by all major findries.

WeldTrace is an affordable software that allows you to manage your welders, create and manage your welding processes, and manage your projects and jobs. WeldTrace is modern, mobile-friendly, and user-friendly. You don't need to connect your welding equipment. It connects all your welding personnel together into one environment.

Our CoCut is the best choice for professional needs because it converts your existing illustration program into a professional-grade cutting application. Multicolored graphics can be cut instantly with its advanced welding functions. CoCut Professional is the perfect tool for printing and cutting signage. Directly cut from CorelDRAW vector graphics program. CoCut Pro supports all contour systems and recognizes common cut marks for optical sensors. The Cut Mark toolbar contains all the tools necessary to create professional print and cut workflows. This includes contouring, multi-copy creation, and cutting plotter-specific registration marks. Step by step, you prepare a print and cut job in your host software and then pass it to CoCut's outputting module. Highly sophisticated segmentation of large plots. Displays material consumption. Multiple cutters can be configured and driven simultaneously on one computer.

WeldEye, a comprehensive welding software, is designed to streamline production processes, ensure compliance with international standards, such as ISO, ASME and AWS, and streamline welding procedures. Its modular design encompasses a variety of functions, such as the management and specification of welding procedures, qualifications for welders and inspectors, documentation, reporting and administration. The platform provides 100% traceability of every weld. This allows for efficient monitoring and controlling of welding operations. The platform includes a digital library of WPS, WPQR and pWPS documents. It also has tools for managing qualifications, including automated validation and follow-up. And it monitors welding parameters in real time. WeldEye is cloud-based, which allows users to access the software from anywhere. The software integrates seamlessly into existing welding equipment regardless of brand and supports multiple languages.

Easy Cut Studio is a stand-alone sign making software for designing and making signage, logos, lettering, stickers and decals with your vinyl cutter and cutting plotter. The state-of-the-art sign making software offers full control over editing and cutting your artworks. Easy Cut Studio is a simple yet powerful vinyl cutting software – not only it allows you to cut TrueType and OpenType fonts installed in the computer, but you can also import vector graphics in various formats (such as SVG, PDF, EPS, AI, WPC). In addition, Easy Cut Studio provides a range of advanced features such as Contour cutting, welding shapes together, rhinestone creation, creating shadow mats, applying various effects to the design, text on path, node editing tools, support for break and split, real-time cutting previews, and many other amazing features that will make your work with your vinyl cutter and artwork faster, easier and more efficient. Easy Cut Studio supports a wide range of vinyl cutters/cutting plotters, including USCutter, UKCutter, GCC, Roland, Graphtec, and so on.

WeldinGo is an integrated welding management software that streamlines the tracking of welders’ work and performance. This enhances production efficiency and organization. It has robust project management features that allow users to divide welding jobs into manageable components and oversee the entire process from start to finish. The platform allows for the addition, importation and deletion of welds, as well as their modification, updating and filtering within a project. This ensures meticulous weld control. Users can manage their welding teams effectively by assigning roles, approvals and overseeing Welding Procedure Specifications along with their associated variables. WeldinGo allows the generation of comprehensive reports or welding logs and supports the performance inspections of welds for accuracy and compliance.

Welds Tracker, a cloud-based software for welding management, is designed to improve efficiency, reduce resource waste, and improve reliability of welding operations. It provides comprehensive control and visibility of welding processes, including maintenance, quality and productivity aspects. The platform allows users to track welding deviations, record welding parameter, monitor robot program reteaching and identify downtime caused by welding processes. The quality management features enable the identification and correction of welding issues, maintenance and access to cross section checks. Welds Tracker allows for the generation of dynamic charts and detailed reports, which allow visualization of parameter changes and statistics. Reports can be exported to Excel or PDF. The software streamlines auditing processes by consolidating data in one location.

AVEVA PRO/II™, Simulation is a steady state simulator that optimizes plant performance through process design, operational analysis, engineering studies, and improved process design. AVEVA PRO/II simulation optimizes plant performance through improved process design, operational analysis, and engineering studies. AVEVA PRO/II Simulation is designed to perform heat and material balance calculations for a wide variety chemical processes. For the most cost-effective operation, you can design new processes or evaluate alternative plant configurations. AVEVA PRO/II simulation is now available online with seamless maintenance, on-demand access, and flexible use. Our support team has over 15 years of combined experience. AVEVA PRO/II simulation optimizes plant performance through process design improvements and operational analysis. It also performs engineering studies.

Welding Manager, a comprehensive software solution for welding data management, stores all welding information including welder qualification, inspection reports, procedures, etc. It allows for full welding traceability and easy tracking and retrieval throughout the project's life cycle. The software is compliant with industry standards, such as AWS B31.3 and ASME B31.3 and API (620/650), and can used by owners, EPCs and manufacturers to improve their operational efficiency and reduce costs. Welding Manager is a web-based application that can be installed on-premises or in the cloud. It can also be accessed from any smartphone or browser. It can be customized to integrate with inventory, ERP, and materials systems to meet the needs of any project. Welding manager allows you to track welders’ productivity, production joints and rejection rates. It also tracks status, availability and WPS qualification.

Luminary Cloud, the first modern SaaS platform for computer-aided design, provides engineers with insights in minutes. It allows engineers to perform simulations, analyses, and iterations that were previously impossible. Experience the magic of running cloud-based simulations within minutes using the most advanced GPUs. Store, access and analyze your raw simulation data securely to uncover insights and optimize engineering design. Run experiments faster to improve product design and quality, while reducing defects. Accelerate the time to market with improved engineering efficiency, lower hardware costs, and reduced physical testing and prototyping costs. With the most accessible simulation platform, empower your team to create better designs faster with more insights and results. Run fast simulations of any scale, collaborate with people around the globe using project sharing, and begin analyzing results immediately.

ColdStream is an engineering platform for thermal simulation that runs in the cloud. It supports your entire thermal management process, from thermal design to thermal analysis. Diabatix's Thermal Simulation Software allows your business to accelerate product development by using only the latest technologies. Get insights on temperature distribution, heat dissipation and fluid flow, thermal resistance and thermal radiation, cooling capability, and more. ColdStream will find the most suitable heat sinks for your electronic devices and products. In just a few simple clicks, you can upload your geometry, configure the thermal simulator operating conditions, and set the design objectives for your heat sinks.

Weldassistant, a comprehensive welding program, is designed to streamline the management of welding documentation including Welding Procedure Specifications, Welding Procedure Qualification Records, and Welder/Operator Certificates, in accordance with ISO, ASME VIII, and AWS standards. The software includes a database of base materials and welding consumables. It also contains over 1,500 pre-made sketches for weld joints. Traffic light indicators provide a clear overview on certification statuses. Users can manage welders and operators qualifications efficiently. Weldassistant offers tools for calculating welding costs, which allow users to estimate and compare the project costs. The software supports 19 different languages and allows bilingual printouts to cater to international operations. Weldassistant is available in several editions, including one that's free. It caters to a variety of organizational needs.

Simufact Additive, a powerful and scalable solution for the simulations of metal-based additive manufacturing processes, is available. Simufact Additives can be used to optimize metal 3D printing and rapid prototyping. Simufact additive can help you significantly reduce the number test prints. We want to help you create AM components with repeatable dimensions. Simufact Additive's multiscale approach to simulation combines the best of both mechanical and thermal methods in one unique software solution. You can choose the simulation method that best suits your needs. Simufact Additive, a specialized software solution, is dedicated to the simulation and analysis of additive manufacturing processes. This is reflected in a lean operation concept for the user.

With our welding software, you can create WPSs that automatically match the PQR approval range and print them to Excel/PDF in one click. WeldNote's QMatrix search engine allows you to quickly search through hundreds of documents. Our welding software allows you to avoid overlapping qualifications and save thousands. WeldNote tracks expiration dates for welder performance qualifications (WPQs) and notifies you via email or in-app. This saves you time and money. Our welding software will not let you miss another expiration date.