Alternatives to STAAD

SkyCiv Structural 3D, a cloud-based Structural Analysis program, allows users to design, analyze, and model complex 3D structures. It can be used online and does not require installation. SkyCiv Structural 3D is the best online structural analysis. It includes the following: – Powerful Analysis: Linear and P-Delta Cables, Buckling Plates, Frequency RS - Integrated design checks for steel, wood connections, foundations wind (AISC. NSD. AISI. EN. AS. CSA. BS plus more ...)

SimSolid is the revolutionary simulation technology for engineers, designers, and analysts. It performs structural analyses on fully-featured CAD assemblies in minutes. SimSolid eliminates geometry preparation, meshing, and other errors that are time-consuming and difficult to perform in conventional structural simulations. Multiple design scenarios can be simulated quickly under real-life conditions. You can use any CAD model, even an early one. SimSolid tolerance for imprecise geometry means SimSolid simulation tools don't need to be simplified before analyzing designs. SimSolid supports all types of connections (bolt/nuts, bonded, rivets and sliding) and analysis for linear static, modal, and thermal properties. It also supports complex coupled, nonlinear, dynamic effects.

In times of tight schedules or limited resources, integrated solutions are crucial. RIBTEC provides many synergies in calculation design, construction, and design. In the context of Building Information Modeling (BIM), you can benefit from a faster data flow that streamlines the entire process of structural design. RIB's software solutions are available for structural engineers. They include building, ground, and finite element calculations as well as tunnel and bridge construction as well as the drawing of formwork or reinforcement plans. Since 1961, RIB has been a pioneer in structural design and FEM. Over 5,000 engineering offices, inspection and construction engineers, as well as planning departments from the public and private sectors use the RIBTEC programs. RIBTEC covers all aspects of structural design with more than 100 programs.

AxisVM primarily serves in the design sector for buildings, industrial facilities, and geotechnical constructions. Its robust finite element solver, along with efficient modeling tools, extends its use to bridge design and the creation of composite structures, machinery, and vehicles. Beyond the standard configurations, users can access optional design modules tailored for reinforced concrete, steel, timber, and masonry elements and connections. Additionally, its unique elements and analytical features enable the design of custom and innovative structures. Users can generate reports that incorporate tables, drawings, and comprehensive design calculations, complete with customizable headings and text. Furthermore, these reports are automatically updated, reflecting the latest model data and results for enhanced accuracy and efficiency. This capability ensures that all documentation remains synchronized with ongoing project developments.

SPACE GASS is a versatile 3D analysis and design software tailored for structural engineers. Its broad array of features accommodates everything from beams and trusses to complex structures like buildings, towers, tanks, cable systems, and bridges. Users can benefit from a powerful 64-bit multi-core solver, impressive 3D visualizations, and specialized elements including plate, frame, cable, and tension/compression-only types, as well as tools for moving loads and integrations with various CAD and building management systems. Choosing SPACE GASS means optimizing your resources with cost-effective, safe, and efficient designs. The user-friendly graphical interface allows for immediate visual feedback on changes, enhancing the design process. Additionally, a rapid sparse matrix solver takes full advantage of multi-core processing capabilities for increased efficiency. The software features a diverse suite of structural modeling tools, analysis methodologies, and design modules to meet various engineering needs. Moreover, an array of comprehensive video tutorials is available to guide users through complex tasks effectively. Finally, the software can be configured for either stand-alone use or floating network systems, adding flexibility for different working environments.

S-FRAME empowers users to design, analyze, and model a wide array of structures, accommodating varying geometric complexities, material types, loading conditions, nonlinear behaviors, and compliance with diverse design codes. Its automated framework generators enable rapid model creation and support the importation of models through BIM and DXF links, allowing for enhanced productivity with integrated tools for concrete and steel design that facilitate design optimization, adherence to codes, and comprehensive report generation. Users are able to swiftly define structures through modeling automation, which includes the capability to create standard or custom trusses and utilize cloning tools to duplicate any portion of their models. Moreover, the ability to import existing BIM and DXF models significantly reduces the time spent on modeling. S-FRAME also features sophisticated meshing tools that construct the finite element mesh, enabling users to derive detailed analytical results for targeted areas of interest. Furthermore, users can delve deeper into these areas by seamlessly converting members into multi-shell models, enhancing their analytical capabilities. Overall, S-FRAME provides a comprehensive solution for modern structural design and analysis needs.

MSC Nastran is a versatile application for multidisciplinary structural analysis, allowing engineers to conduct various assessments, including static, dynamic, and thermal analyses, in both linear and nonlinear contexts. This software integrates automated structural optimization and award-winning fatigue analysis technologies, all powered by advanced computing capabilities. Engineers leverage MSC Nastran to guarantee that structural systems possess the required strength, stiffness, and longevity to prevent failures such as excessive stresses, resonance, buckling, or harmful deformations that could jeopardize structural integrity and safety. Additionally, MSC Nastran serves to enhance the cost-effectiveness and comfort of passenger experiences in structural designs. By optimizing performance in existing frameworks or creating distinctive product features, this tool provides a competitive edge within the industry. Furthermore, it assists in addressing potential structural problems that might arise during a product's operational life, thereby minimizing downtime and reducing associated costs. Ultimately, MSC Nastran empowers engineers to innovate and refine their designs effectively.

GT STRUDL® stands out as a comprehensive structural engineering software that integrates 3D CAD modeling and advanced 64-bit computation solvers in its various versions. This software provides a full suite of tools for analyzing a wide array of structural engineering and finite element analysis challenges, encompassing both linear and nonlinear static and dynamic analyses, achieving high accuracy in significantly less time compared to most other design software available. Designed to assist structural engineers in developing safe and efficient designs, GT STRUDL effectively addresses the complexities that arise across multiple industries such as power generation, civil engineering, marine applications, and infrastructure development. Moreover, quality software like GT STRUDL boasts a range of features, including interoperability, structural analysis capabilities, database-driven design, and quality assurance, all aimed at enhancing the engineering design process. This robust combination of functionality and efficiency makes GT STRUDL a valuable asset for engineers tackling intricate projects.

Ansys Mechanical stands out as a premier finite element solver that encompasses structural, thermal, acoustics, transient, and nonlinear analysis capabilities to enhance your modeling efforts. This powerful software allows users to tackle intricate structural engineering challenges, facilitating quicker and more informed design decisions. The suite's finite element analysis (FEA) solvers provide the flexibility to tailor and automate solutions for various structural mechanics issues while enabling the exploration of multiple design possibilities through parameterization. Offering a comprehensive array of analysis tools, Ansys Mechanical supports a dynamic environment that spans from geometry preparation for analysis to integrating additional physics for enhanced accuracy. Its user-friendly and adaptable interface empowers engineers across different experience levels to efficiently obtain reliable results. Furthermore, Ansys Mechanical fosters a cohesive platform that leverages finite element analysis (FEA) specifically for structural evaluations, making it an indispensable asset in engineering design workflows. With its extensive functionalities, Ansys Mechanical is designed to meet the diverse needs of modern engineering professionals.

Simcenter Nastran stands out as a leading finite element method (FEM) solver known for its exceptional computational performance, precision, dependability, and scalability. This comprehensive tool provides robust solutions for various applications, including linear and nonlinear structural analysis, structural dynamics, acoustics, rotor dynamics, aeroelasticity, thermal analysis, and optimization. One of the key benefits of having such a diverse array of solutions within a single solver is that it standardizes input/output file formats across all types of analyses, significantly streamlining the modeling process. Whether utilized as an independent enterprise solver or integrated within Simcenter 3D, Simcenter Nastran is instrumental for manufacturers and engineering firms across several sectors, including aerospace, automotive, electronics, heavy machinery, and medical devices. By catering to their vital engineering computing requirements, it enables these industries to deliver safe, reliable, and optimized designs while adhering to increasingly tighter design timelines. This versatility and efficiency make Simcenter Nastran an invaluable asset in the modern engineering landscape.

Numerous professionals utilize VisualAnalysis (VA) to efficiently meet their project deadlines. Users frequently commend it as "exceptional value" and "incredibly user-friendly." It provides essential tools that are budget-conscious. The software allows for the creation of 3D models for a variety of structures, including complete buildings, tanks, and towers, alongside offering both static and dynamic response analysis capabilities. It performs design code verifications for materials such as steel, wood, concrete, cold-formed steel, and aluminum. VisualAnalysis features comprehensive analysis and design functionalities, including automatic plate meshing, a command window, nonlinear elements, and dynamic time history analysis. Its 3D static and dynamic finite element analysis (FEA) is suitable for civil, mechanical, aerospace, and other types of structural evaluations. Additionally, it includes optional support for building code load combinations. Users can easily apply loads, distribute area loads to structural members, and manage gravity and lateral loads within the same project. The software enables the creation of frame, truss, or FEA models for nearly any type of structure, with the ability to sketch, generate, and import designs from CAD or BIM tools like Revit. With its rapid static analysis, P-delta calculations, AISC Direct methods, dynamic assessments, and nonlinear capabilities, it delivers proven and validated results for engineering professionals. Overall, VisualAnalysis stands out as a versatile solution for various engineering needs.

SolidFEA is a groundbreaking solid finite element analysis tool that aims to make sophisticated structural engineering design both more accessible and cost-effective. Utilizing the Calculix engine, it provides in-depth sub-model analysis while requiring less financial investment and computing power compared to competitors such as Abaqus. This software is particularly well-suited for tackling intricate engineering challenges, such as those found in steel connections and bridge engineering, and it empowers users by making specialized software easier to access. With its ability to import IFC file formats, SolidFEA integrates smoothly into existing engineering workflows, enhancing the functionality of our GenFEA software for thorough structural analysis. By lowering entry barriers traditionally tied to solid finite element analysis (FEA), SolidFEA represents a significant advancement in structural engineering design and encourages innovation by allowing more engineers to participate in complex projects. Ultimately, its user-friendly design and compatibility features facilitate a new era of efficiency in engineering practices.

ProStructures is an all-encompassing application designed for the design of steel and concrete structures, aimed at enhancing both productivity and profitability in your projects. This powerful tool enables users to build and seamlessly update three-dimensional models that incorporate structural steel and reinforced concrete elements. ProSteel, a key component of this suite, facilitates the modeling and detailing of steel structures catering to various sectors. Users can efficiently generate models and documentation for steel frameworks, ensuring the delivery of precise 3D representations while extracting essential engineering, fabrication, and erection drawings. The application allows for automatic updates whenever modifications are made to the 3D model, ensuring that all information remains current. It also produces detailed drawings for every conceivable steel shape, connection, and plate work directly from the 3D representation. Moreover, it has the capability to generate and refresh in-drawing reports, external documentation, and bills of material. Additionally, users can create comprehensive 3D models alongside design drawings, fabrication specifics, and schedules that automatically reflect any alterations made to the 3D model, streamlining the entire design process further. This integration of features makes ProStructures an invaluable asset for professionals in the field.

Subjecting your designs to real-world scenarios can significantly enhance product quality while simultaneously minimizing the costs associated with prototyping and physical testing. The SOLIDWORKS® Simulation suite offers a user-friendly collection of structural analysis tools that employ Finite Element Analysis (FEA) to forecast how a product will behave in actual physical conditions by virtually evaluating CAD models. This comprehensive portfolio is equipped with capabilities for both linear and non-linear static and dynamic analyses. With SOLIDWORKS Simulation Professional, you can refine your designs by assessing mechanical resistance, durability, topology, natural frequencies, as well as examining heat transfer and potential buckling issues. Additionally, it facilitates sequential multi-physics simulations to enhance design accuracy. On the other hand, SOLIDWORKS Simulation Premium allows for an in-depth assessment of designs concerning nonlinear and dynamic responses, dynamic loading conditions, and composite materials. This advanced tier also features three specialized studies: Non-Linear Static, Non-Linear Dynamic, and Linear Dynamics, ensuring a thorough evaluation of your engineering projects. By leveraging these powerful tools, engineers can achieve greater design confidence and innovation.

Fatigue Essentials is a desktop software designed to streamline the process of structural fatigue analysis. This application offers an intuitive interface for performing stress-life evaluations, utilizing either traditional stress calculations or integrating with FEMAP™ to leverage finite element analysis results. The program is designed with a user-friendly tree structure that guides users through various stages of analysis, starting with selections related to loads, materials, and spectrum branches. Each section allows for different variations of analysis or methods of input. Users can view analysis results directly on the screen, which can be easily copied into reports or visualized as damage contour plots in FEMAP. It encompasses a wide range of engineering needs, featuring a classic mode that allows for manual input of stresses and a professional mode linked with FEMAP, which can read nodal stresses and generate damage contour visualizations. Additionally, users have the flexibility to choose between interactive input or file uploads for entering stresses and cycles, enhancing the application's versatility. Ultimately, Fatigue Essentials stands out as an essential tool for engineers engaged in fatigue analysis.

Advance Design serves as a robust and user-friendly FEM Structural Analysis tool specifically tailored for structural engineers working within a BIM ecosystem. It adeptly handles the design of various structures, accommodating different load types while integrating concrete, timber, and steel components seamlessly. With compliance to significant code standards, including Eurocodes and North American guidelines, Advance Design elevates the BIM experience significantly. It fosters intelligent, model-driven workflows that benefit engineers and construction professionals alike. By functioning as a BIM platform, it ensures the preservation of geometric and analytical data throughout the design process via smooth model transfers. Furthermore, analysis outcomes are preserved within the Digital Model and contribute meaningfully to the BIM workflow. For example, these results can facilitate the initiation of rebar designs or steel connection processes directly within Revit, creating innovative opportunities in structural design. With its powerful capabilities, user-friendly interface, and full compatibility with Revit®, Advance Design is backed by a dedicated team of experts and offers a flexible licensing structure to accommodate diverse user needs. This combination of features makes it an essential tool for modern structural engineering.

Enhanced bridge construction from start to finish is achievable with OpenBridge Designer, which boasts sophisticated interoperability that allows users to access data from Bentley’s civil applications while ensuring a smooth connection to their bridge design and analysis tools. This enables project teams to transition the conceptual model created in OpenBridge Modeler to the detailed design phase, facilitating a comprehensive workflow that includes analysis and design, as well as assessing construction work stages using Bentley’s LEAP applications, RM Bridge, OpenRoads Designer, ProStructures, ProjectWise, and more. By integrating all these functionalities within a single application, users can significantly boost performance, create intelligent models through user-friendly 3D parametric bridge modeling features, and enhance project outputs with smart data management and automated drawing production, thereby transforming the bridge delivery workflow. OpenBridge Modeler serves as a powerful 3D parametric modeling tool specifically designed for bridges, ensuring precision and efficiency throughout the project lifecycle. Ultimately, this streamlined approach not only speeds up development but also elevates the overall quality of bridge engineering projects.

FloCAD® serves as an add-on module for Thermal Desktop®, creating a comprehensive software solution for thermohydraulic analysis that encompasses fluid flow and heat transfer. The process of constructing fluid flow models in FloCAD closely resembles that of thermal models, allowing for the use of numerous shared commands across both model types. Users can create FloCAD models using a free-form approach, which allows for the simplification and abstraction of flow networks, or they can opt for geometry-based modeling that incorporates elements like pipe centerlines, cross-sections, and intricate vessels, as well as convection calculations linked to finite difference or finite element thermal structures. As an advanced tool for pipe flow analysis, FloCAD effectively accounts for pressure losses within piping networks arising from bends, valves, tees, and variations in flow area, among other factors. This versatility makes FloCAD a valuable asset for engineers looking to optimize system designs.

GEMS, which stands for Geotechnical Engineering Modelling Software, creates sophisticated and user-friendly CAD applications specifically tailored for the evaluation and design of foundations. This suite utilizes finite element modeling methods to effectively analyze both shallow and deep foundation systems, featuring dedicated modules for assessing beam foundations, pile foundations, and a unique option for offshore pile foundations. You can experience the GEMS foundation analysis suite at no cost through a cloud-based platform. Additionally, it is accessible for trial downloads and available for purchase on both PC and Mac systems, ensuring a wide range of users can benefit from its advanced capabilities. Whether you are a student or a professional, GEMS provides an excellent opportunity to enhance your foundation design projects.

Effortlessly generate intricate concrete geometries, encompassing single levels, ramps, and multi-tiered concrete edifices, by utilizing powerful modeling tools that also support imports from CAD and BIM applications. Conduct thorough analyses on slabs or complete structures to assess the cumulative impacts of gravity, lateral forces, and vibrations through advanced 3D finite element analysis, intuitive load distribution, and precise slab positioning. Whether you're examining an existing reinforced concrete slab or crafting a multi-story post-tensioned structure, ADAPT-Builder empowers you to oversee every facet of design, including crack management, long-term deflections, and punching shear, guaranteeing that the outcomes are both accurate and comprehensive. No matter what your concrete design requirements may be, there exists an ADAPT software solution tailored just for you. Explore different packages and take the first step toward your project. ADAPT-Builder serves as the comprehensive 3D modeling, analysis, and design hub for ADAPT-Floor Pro, Edge, MAT, and SOG, while Modeler integrates seamlessly with ADAPT-PT and RC, enhancing your design capabilities even further. With these tools at your disposal, you can confidently tackle any concrete project.

MasterSeries PowerPad represents a comprehensive suite for structural analysis and design, making it an excellent choice for engineers seeking extensive design features at a remarkably low cost. By offering scaled-down versions of its primary analysis and design tools, MasterSeries PowerPad ensures that a variety of established programs are accessible for less than one-third of their standard pricing. Central to PowerPad is the robust MasterFrame analysis module, which seamlessly connects with design modules for steel, concrete, composite, and timber, creating a fully integrated, three-dimensional analysis and design workspace. Additionally, the PowerPad (Student Edition) is available for free, providing students access to our commercial PowerPad Plus suite. Unlike mere proformas, PowerPad bundles lightweight versions of true software applications, including straightforward designs for steel, concrete, and timber beams, along with the capability to analyze beams, trusses, plane frames, grillages, and space frames. This extensive functionality supports engineers in executing a wide array of design projects efficiently.

STRAP (Structural Analysis Program) offers advanced software solutions tailored for structural analysis and design, streamlining the entire design workflow from initial analysis to the creation of detailed drawings. It provides design engineers with adaptable options for various concrete and steel structures, encompassing everything from residential and commercial buildings to bridges, industrial sites, retaining tanks, and communication towers. This program is equipped to handle a diverse array of projects, ensuring that both small frame structures and expansive high-rise buildings are adequately addressed. Additionally, STRAP features user-friendly node definition capabilities, allowing designers to work with either a Cartesian or cylindrical coordinate system, thereby enhancing its versatility and ease of use in various applications. Through its comprehensive toolsets, STRAP satisfies the multifaceted requirements of modern structural engineering projects.

ASTRA Pro offers optional applications for structural analysis and design tailored for RCC multi-story buildings and RCC tunnel linings supported by steel ribs, as well as RCC portals that take into account rock quality designation (RQD) and rock mass rating (RMR), along with the design of RCC and PSC jetties. The software provides a comprehensive step-by-step analysis and design process, complete with a set of editable CAD drawings. In the demo version, users cannot modify the default input data, and the drawings are view-only. Each design module comes with an entire set of reports and drawings, ensuring thorough documentation. Additionally, ASTRA Pro includes detailed estimations for Bill of Quantities (BoQ), item rates, and costs for various bridge types, including girder bridges, box bridges/culverts, and composite bridges. This software is specifically designed for the engineering design of various bridge types, such as RCC 'T' Girder Bridges, Composite Bridges featuring Steel Plate/Box Girders and RCC Deck Slabs in both single and multi-span configurations, as well as PSC 'I' Girder Bridges, PSC Box Girder Bridges, Continuous PSC Box Girder Bridges, and Steel Truss Bridges, making it an invaluable tool for civil engineers involved in bridge construction projects.

The FEA program RFEM enables quick and easy modeling, structural, and dynamic calculation as well as the design and construction of models with member and plate, wall, folded plates, shell, shell, and other solid elements. Modular software allows you to connect the main program RFEM to the appropriate add-ons to meet your specific requirements. Structural analysis program RFEM offers structural engineers a 3D FEA tool that meets all modern civil engineering requirements. Simple and complex structures can be modelled with ease thanks to efficient data input and intuitive handling. The basis of a modular software program is the structural analysis program RFEM. The RFEM basic program is used to create structures, materials, loads, and plans for spatial and planar structural systems that include plates, walls, shells and members. You can also create mixed structures and model contact elements.

SwiftComp is an innovative composite simulation software that combines multiscale and multiphysics capabilities to provide the precision of 3D finite element analysis (FEA) with the simplicity of basic engineering models. This groundbreaking tool simplifies the modeling process for engineers, allowing them to treat composites with the same ease as metals while maintaining accuracy and capturing intricate microstructural details. It offers cohesive modeling for structures that are one-dimensional (like beams), two-dimensional (such as plates or shells), and three-dimensional, effectively calculating the material properties required. Users can utilize SwiftComp independently for virtual composite testing or as an enhancement to existing structural analysis tools, thereby integrating high-fidelity composite modeling into their workflows. Additionally, SwiftComp excels in determining the optimal structural model for macroscopic analysis and includes capabilities for dehomogenization, which enables the calculation of pointwise stresses within the microstructure. It seamlessly connects with established software such as ABAQUS and ANSYS, further broadening its applicability in engineering projects. As a result, SwiftComp significantly enhances the efficiency and effectiveness of composite material modeling in various engineering applications.

Revolutionize your infrastructure planning efficiency with our comprehensive solution that facilitates the rapid creation of precise and seamlessly integrated design models. Widely adopted by civil and structural engineers, Causeway’s Infrastructure Design solution includes essential modules for volumetric calculations, alignment design, drainage planning, and vehicle path analysis, complemented by tools for generating road markings and designing traffic signage. With advanced 3D modeling capabilities and robust integration features, this solution brings the full advantages of Building Information Modelling (BIM) to civil engineering professionals. Causeway PDS equips design engineers with state-of-the-art 3D design tools, empowering them to achieve optimal design outcomes. Tailored with dedicated auto-design and auto-update functionalities, this solution is specifically crafted to save valuable time for engineers, minimize risk, and ensure that every design is infused with intrinsic value. Ultimately, Causeway's comprehensive approach not only enhances productivity but also elevates the overall quality of infrastructure projects.

The user interface of our software has been designed for maximum ease of use. Users can create geometry in multiple views using sophisticated modeling tools, or they can input data through spreadsheets, all seamlessly integrated within RISA-3D. This powerful tool offers analysis and design capabilities that facilitate the quick creation of various structures, accommodating a diverse selection of materials. You can design everything from buildings and bridges to tanks and culverts, covering a vast array of engineering needs. Detailed reports can be generated, featuring both graphical and numerical results, which provide comprehensive output and instill confidence in your designs for you and your team. The latest iteration of RISA-3D's user interface has been tailored specifically to the workflow of structural engineers. It employs a straightforward left-to-right, tab-by-tab ribbon system that allows users to easily navigate their models from initial concepts to final design refinement by simply following the sequence of icons. Moreover, the interface offers customization options, enabling users to keep their most frequently used tools readily accessible at all times, enhancing their efficiency even further. Ultimately, this thoughtful design ensures that engineers can focus more on innovation and less on navigating complex software.

e-Xstream engineering specializes in the development and commercialization of the Digimat software suite, which features advanced multi-scale material modeling technology that accelerates the creation of composite materials and structures. Serving as a fundamental component of the 10xICME Solution, Digimat enables in-depth analyses of materials at the microscopic level and facilitates the creation of micromechanical models that are essential for integrating micro- and macroscopic interactions. The material models provided by Digimat allow for the combination of processing simulations with structural finite element analysis (FEA), paving the way for more accurate predictions by considering how processing conditions affect the final product's performance. Utilizing Digimat as an efficient and predictive tool significantly aids users in the design and manufacturing of cutting-edge composite materials and components, leading to substantial savings in time and costs. Ultimately, this capability empowers engineers to push the boundaries of innovation in composite material applications.

GenFEA exemplifies our commitment and passion, resulting from extensive years of careful research and development. This project, fueled by our enthusiasm, is on the brink of transforming the industry with its AI-powered features that introduce cutting-edge technological innovations to the worldwide market. We believe that with GenFEA, we can create a remarkable influence by providing pioneering solutions that address the intricate challenges and requirements of the global AEC sector. Traditionally, structural engineering software has been burdened with high costs, complex learning processes, and a sluggish pace in adopting modern technological advancements. By harnessing the power of the latest artificial intelligence, delivering a seamless user experience, and maintaining affordability, GenFEA is committed to making sophisticated structural analysis and design tools more accessible, user-friendly, and aligned with the groundbreaking technologies shaping our time. Ultimately, our goal is to empower professionals in the field with tools that enhance their capabilities and efficiency in project execution.

MasterSeries stands as the premier suite of integrated software for structural analysis, design, drafting, and detailing in the UK, boasting a user base of over 10,000 across the globe. It offers a leading-edge, multi-material BIM-enabled modeling and design environment, complemented by an array of robust standalone modules, making it the most comprehensive collection of advanced structural engineering software available in one package. This integration allows users to maximize productivity by minimizing the need to switch between various incompatible systems and re-enter the same information repeatedly. Recognizing that every business has unique needs, MasterSeries is designed with a modular approach, ensuring that companies can tailor their software solutions to fit their specific requirements without the burden of purchasing a large, expensive package filled with unnecessary features. By allowing users to select only the modules essential for their operations, MasterSeries empowers businesses to craft a customized software experience that adapts to their evolving needs, thereby enhancing efficiency and effectiveness in their projects. Ultimately, this flexibility not only streamlines workflows but also supports future growth by enabling easy adjustments as business demands change.

Every project presents its own set of challenges, yet conducting geotechnical analysis can be straightforward with the right tools. PLAXIS 2D streamlines the process by offering rapid computational capabilities. It enables sophisticated finite element or limit equilibrium analysis concerning soil and rock deformation and stability, including aspects like soil-structure interaction, groundwater, and thermal dynamics. As an exceptionally powerful and intuitive finite-element (FE) software, PLAXIS 2D specializes in 2D analyses relevant to geotechnical engineering and rock mechanics. Used globally by leading engineering firms and academic institutions, PLAXIS is a staple in the civil and geotechnical sectors. The software proves to be versatile, accommodating various applications such as excavations, embankments, foundations, tunneling, mining, oil and gas projects, and reservoir geomechanics. Notably, PLAXIS 2D encompasses all necessary features for conducting deformation and safety assessments for soil and rock, without delving into complex factors like creep, steady-state groundwater, thermal flow, consolidation, or any time-dependent phenomena. This makes it an invaluable resource for engineers focused on efficiency and accuracy in their analyses.

Currently, engineering teams frequently utilize specialized simulation tools from various vendors to analyze diverse design characteristics, leading to inefficiencies and heightened costs due to the use of multiple software products. SIMULIA provides a comprehensive suite of integrated analysis tools that enables all users, independent of their simulation skills or areas of expertise, to work together and effortlessly exchange simulation data and approved methodologies while maintaining the integrity of information. The Abaqus Unified FEA product suite presents robust and comprehensive solutions for both basic and advanced engineering challenges, applicable across a wide range of industries. In sectors such as automotive, engineering teams can evaluate overall vehicle loads, dynamic vibrations, multibody systems, crash impacts, nonlinear static conditions, thermal interactions, and acoustic-structural interactions, all within a unified model data framework and using integrated solver technology. This integration not only streamlines the simulation process but also enhances collaboration among different engineering disciplines.

Elevate your product design by incorporating simulation and analysis, which helps minimize expensive physical prototyping while enhancing the durability, reliability, and safety of your products. Employing digital prototypes to assess the performance of your designs in real-world scenarios is crucial for successful product development. Creo Simulation is specifically tailored for engineers, featuring a robust suite of structural, thermal, and vibration analysis tools along with an extensive range of finite element analysis (FEA) capabilities. With Creo Simulation, you can effectively evaluate and affirm the performance of your 3D virtual prototypes prior to producing the first physical component. We provide adaptable and innovative simulation solutions to meet the distinct needs of our customers. This section serves as a resource to explore our offerings tailored to your requirements, and should you have any inquiries about our toolset, please do not hesitate to reach out to a Creo representative for assistance. This proactive approach ensures that your products not only meet but exceed expectations in their respective markets.

Oasys software delivers cutting-edge solutions distinguished by their user-friendly designs and the efficiency with which they empower users to rapidly and economically test their concepts. This software enables engineers to tackle the most intricate design challenges with precision, ensuring adherence to global standards and compatibility with other prominent software packages. Users can access Oasys tools individually or take advantage of cost-effective bundles that group related applications. The suite includes a variety of analysis and design solutions tailored for buildings, bridges, geotechnical projects, and pedestrian traffic management. Oasys provides comprehensive engineering resources for architects, engineers, builders, students, consultants, and planners across multiple disciplines. Whether addressing simple low-rise constructions or sophisticated high-rise and specialized structures facing demanding loading scenarios, Oasys equips users with the necessary tools for thorough analysis and design, ensuring a robust foundation for any project. With Oasys software, professionals can maintain confidence in their results while pushing the boundaries of innovative design solutions.

Our achievements hinge on our capacity to accurately comprehend the needs of our clients in order to effectively address their challenges. Communication channels are clear and accessible, extending even to the CEO when necessary, to guarantee that our clients' objectives for timely project completion are met. We prioritize the safety of structural projects implemented through our technologies, reflecting our commitment to both our clients’ interests and the welfare of our workforce. Our clients recognize us as dependable partners invested in long-term relationships, always striving for excellence. We offer technologies that are not only cutting-edge but also dependable. It is our belief that high-quality products stem from reputable companies serving discerning customers. We cater to a diverse clientele, from emerging engineers launching their careers to the largest, most established engineering firms and governmental agencies. The process of modeling and designing with SAFI software is designed to be both intuitive and user-friendly, ensuring accessibility for all users. Our dedication to understanding our clients' unique challenges sets us apart in the industry.

ClearCalcs cloud structural engineering software allows engineers and designers to simplify repetitive calculations using easy-to-use calculators for beams and columns, foundations, and other important information. ClearCalcs has calculators for all standards including the US, Eurocode, Australian, New Zealand, and Canadian. ClearCalcs can help you improve your productivity and design ability. Calculations can be linked together in one click, saving time and errors copy paste loads. Reports print to a simple one-page PDF for easy inspection.

ideCAD One AEC is a multidisciplinary BIM software for Architecture, Structural Engineering and Detailing. It also includes Building Information Modeling (BIM). The Integrated Package offers Structural Engineers and Detailers Integrated BIM, AEC and CAD Tools that support projects at all stages of design and construction. Integrated design tools help you create high-quality, high performance Architectural and structural designs. Optimise projects with integrated Structural Analysis, Steel Design, Concrete Design, Connection Design, visualization and simulation tools. Improve predictability on the field by using integrated tools that maximize constructability. Integrated workflows for integrated modeling, multi-discipline coordination and construction documentation can accelerate design processes and improve the quality of designs.

ProtaStructure offers a cutting-edge structural BIM solution tailored for structural engineers, enabling them to efficiently and precisely model, analyze, and design buildings. By utilizing a centralized model, users can effortlessly compare various design options and automate both steel and concrete designs, significantly cutting down on design time while enhancing project profitability. The platform includes sophisticated features like grouped member design, three-dimensional finite element analysis, staged construction planning, as well as seismic design and punching shear evaluations, allowing for rapid results generation. Adapt to changes seamlessly and foster smooth collaboration with architects, owners, and other stakeholders through intelligent BIM integration. With ProtaStructure, you can not only save valuable time but also maximize project profits, ensuring a streamlined workflow from start to finish. Leveraging its advanced capabilities, ProtaStructure stands out as an essential tool for modern structural engineering projects.

SDC Verifier serves as a comprehensive software tool for structural design, finite element analysis (FEA), and compliance verification with relevant design codes and standards. It can function as a standalone application or as an add-on to platforms like Ansys Mechanical, Femap, and Simcenter 3D, enhancing their capabilities for engineers and designers.

LIRA-SAPR is a comprehensive software package that uses BIM technology. This software is used to analyze and design different types of mechanical and building engineering structures. - Dynamic (forces and displacements), and static analyses - Selection and inspection of sections of steel and/or reinforced cement (RC) structures - Preliminary drawings for steel structures and separate RC elements

AutoPIPE is an advanced software solution specifically designed for conducting pipe stress analysis. By utilizing its user-friendly modeling interface and sophisticated analytical features, you can enhance productivity and elevate quality control standards. The software facilitates seamless collaboration among pipe stress engineers, structural engineers, and CAD designers by offering interoperability with top plant design software. It comes equipped with specialized tools for intricate buried pipeline assessments, hot clash detection, wave loading, fluid transients, and the use of FRP/GRP or plastic pipes. Furthermore, AutoPIPE streamlines your workflow by integrating with various Bentley and third-party applications, including OpenPlant, AutoPLANT, PlantSpace, Hexagon PDS and SmartPlant, Autodesk Plant 3D, and Aveva E3D Design. Additionally, AutoPIPE efficiently identifies the most suitable pipe support locations to meet your design specifications while ensuring a cost-effective approach that does not compromise on quality or safety. Overall, this software enhances engineering practices by providing solutions that are both innovative and reliable.

RSTAB is a powerful software that allows structural engineers to meet the requirements of modern civil engineering. It provides a 3D beam, frame or truss calculation. Use the RSTAB software to design beam, frame or truss constructions made of steel, concrete, wood, aluminum or other materials. RSTAB allows you to quickly and easily define a structure model, then calculate internal forces, deformations and support reactions. You can use the design add-ons to take into account material- and standard specific requirements.

Effortlessly merge design and analysis into a single, streamlined model-based approach. Our user-friendly, integrated software for design and analysis empowers engineers to swiftly produce safe, effective, and optimized designs, regardless of the structural materials used. Experience a transformation in your workflow today! Tekla Structural Designer equips engineers to analyze and design buildings with remarkable efficiency and profitability. With extensive automation and an array of unique features tailored for optimal concrete and steel design, Tekla Structural Designer enables engineering firms to secure more projects and enhance their profit margins. From quickly evaluating various design options to managing changes cost-effectively and fostering seamless collaboration in BIM, Tekla Structural Designer can significantly elevate your business performance. Achieve quicker design cycles and improve your profitability, as the creation of a unified model with a single dataset ensures smooth and effective BIM integration. The impact on your productivity will be evident as you implement this powerful tool.

Patran offers an extensive array of tools designed to facilitate the development of models ready for analysis across various domains, including linear and nonlinear problems, explicit dynamics, thermal analysis, and more within finite element solutions. Its geometry cleanup features assist engineers in efficiently addressing issues like gaps and slivers present in CAD designs, while solid modeling capabilities allow users to construct models from the ground up. The software simplifies the mesh generation process on both surfaces and solids through a combination of fully automated meshing routines and manual techniques that afford users greater precision. Additionally, Patran includes built-in options for setting up loads, boundary conditions, and analyses compatible with leading finite element solvers, significantly reducing the need for adjusting input files. With its robust and industry-validated functionalities, Patran ensures that virtual prototyping is not only swift but also effective, enabling users to assess product performance against specific requirements and refine their designs accordingly. As a result, engineers can spend less time on setup and more on innovation and optimization.

Utilizing PLAXIS 2D LE or PLAXIS 3D LE enables the modeling and evaluation of geoengineering initiatives through limit equilibrium techniques. These robust software tools focus on limit equilibrium slope stability analysis and finite element groundwater seepage analysis, delivering swift and thorough evaluations across a diverse range of scenarios. You can develop both 2D and 3D models for slope stability concerning soil and rock formations. Benefit from an extensive variety of search methods along with over 15 different analysis techniques at your disposal. Additionally, the multiplane analysis (MPA) feature enhances the spatial assessment of slope stability. This functionality allows for the analysis of various structures such as embankments, dams, reservoirs, and cover systems, while also considering broader hydrogeological contexts, thereby facilitating more informed engineering decisions. Such versatility makes these tools indispensable for professionals engaged in geoengineering projects.

The Braceworks® add-on for Vectorworks Spotlight offers a streamlined solution for design, production, and rigging experts to assess the load-bearing performance of temporary structures. This innovative module not only enhances safety but also ensures adherence to engineering regulations and standards, facilitating a fully integrated process for modeling, analysis, and documentation within a single platform. As regulatory standards, such as the Eurocodes, tighten and demands from venues, municipalities, and property owners increase, companies involved in event design, A/V setups, and rigging are now required to produce detailed load and structural calculations for validation by structural engineers. Users can conduct both static and FEM analyses, with outcomes visually represented on the model for straightforward interpretation. Additionally, it automatically creates comprehensive calculation reports, simplifying the documentation process and enhancing efficiency in project delivery. This powerful tool is essential for professionals aiming to maintain high standards of safety and compliance in their work.

FEATool Multiphysics – "Physics Simulator Made Easy" – a fully integrated physics simulation, FEA and CFD toolbox. FEATool Multiphysics provides a fully integrated simulation platform that includes a unified user interface for several multi-physics solvers such as OpenFOAM and Computational fluid dynamics (CFD), including SU2 Code and FEniCS. This allows users to model coupled physics phenomena, such as those found in fluid flow and heat transfer, structural, electromagnetics acoustics and chemical engineering applications. FEATool multiphysics is a trusted tool for engineers and researchers in the energy, automotive and semi-conductor industries.

By utilizing CONSELF, you can harness the power of Computational Fluid Dynamics (CFD) and Finite Element Analysis (FEA) to enhance your product designs: reduce drag and losses related to fluid dynamics, boost efficiency, optimize heat exchange capabilities, assess pressure loads, confirm material strength, analyze deformation in component shapes, compute natural frequencies and modes, among various other functions. The platform offers both static and dynamic simulations for Structural Mechanics, accommodating the behavior of materials under elastic and plastic conditions. Additionally, it enables modal and frequency analyses, starting from widely used CAD neutral file formats, ensuring a seamless integration into your design workflow. This comprehensive approach allows for innovative solutions to complex engineering challenges.

ProSteel software enables the efficient creation of precise 3D models for structural steel, metal projects, and steel assemblies. It allows users to swiftly generate design drawings, fabrication details, and schedules that automatically update in response to any modifications made to the 3D model. Furthermore, the software provides detailed outputs for CNC machines, streamlining the steel fabrication process. ProSteel is designed to support your construction and planning efforts for structural steel and metal work within a 3D modeling environment. When used alongside AutoCAD or MicroStation, it offers an intuitive and integrated multi-material modeler that is ideal for designing complex structures, producing shop drawings, assembling connections, and managing bills of materials. You can quickly extract 2D drawings that will adjust automatically when the 3D model is altered. Additionally, ProSteel's interoperability with other Bentley and third-party applications facilitates seamless information exchange across different disciplines, improving collaboration and efficiency throughout the project lifecycle. This capability enhances the overall workflow, making it easier to coordinate tasks among various teams involved in the construction process.

nCode DesignLife serves as a proactive design tool that pinpoints essential areas and estimates realistic fatigue lifespans based on top finite element (FE) analysis results applicable to both metals and composites. This innovative tool empowers design engineers to enhance their approach beyond basic stress assessments, enabling them to simulate real-world loading scenarios and thereby mitigate the risks of both under-design and over-design in their products, which can lead to expensive modifications later on. Additionally, the software offers features like virtual shaker testing, fatigue analysis for welds, vibration fatigue assessments, crack growth monitoring, fatigue evaluation for composites, and thermo-mechanical fatigue studies. It leverages advanced technologies for analyzing multiaxial stress, weld integrity, short-fiber composites, vibrational impacts, crack propagation, and thermal stress fatigue. With a user-friendly graphical interface, it facilitates comprehensive fatigue analysis using data from leading FEA tools such as ANSYS, Nastran, Abaqus, Altair OptiStruct, LS-Dyna, among others. Moreover, it incorporates multi-threaded and distributed processing capabilities, enabling efficient handling of large finite element models and optimizing overall usage schedules. This powerful combination of features ultimately ensures that engineers can deliver more reliable and efficient designs.