Alternatives to SOLIDWORKS Simulation

SimSolid is the revolutionary simulation technology for engineers, designers, and analysts. It performs structural analyses on fully-featured CAD assemblies in minutes. SimSolid eliminates geometry preparation, meshing, and other errors that are time-consuming and difficult to perform in conventional structural simulations. Multiple design scenarios can be simulated quickly under real-life conditions. You can use any CAD model, even an early one. SimSolid tolerance for imprecise geometry means SimSolid simulation tools don't need to be simplified before analyzing designs. SimSolid supports all types of connections (bolt/nuts, bonded, rivets and sliding) and analysis for linear static, modal, and thermal properties. It also supports complex coupled, nonlinear, dynamic effects.

Ansys MotorCAD is a dedicated tool for electric machine design. It allows you to quickly simulate multiphysics across the entire torque-speed operating range. Motor-CAD allows engineers to evaluate motor topologies across the entire operating range. This allows them to create designs that are optimized for size, efficiency, and performance. Motor-CAD software's four modules, Emag, Therm Lab, Mech, allow multiphysics calculations to be performed quickly, iteratively, and users can move from concept to final design in a shorter time. Motor-CAD users can explore more motor topologies and fully evaluate the impact of advanced loss effects during the initial stages of an electrical mechanical design with Motor-CAD's streamlined data input process. This release features powerful new features for design optimization and multi-physics analysis, as well as system modeling for electric motors. Multiphysics simulations are fast across the entire torque-speed range.

HyperWorks offers easy-to-learn and effective workflows that leverage domain expertise and increase team productivity. This allows for efficient development of today's complex and connected products. Engineers can now move seamlessly from one domain to another with the new HyperWorks experience. They can even create reports without ever leaving the model. HyperWorks allows you to create, explore, and optimize designs. These designs can accurately model structures, mechanisms and fluids as well as electrical, embedded software, systems designs, and manufacturing processes. The solution-specific workflows improve a variety of engineering processes, including fatigue analysis, CFD modeling, concept design optimization, design exploration, and CFD modeling. Each interface is intuitive and well-designed, and differentiated for each user. It's also consistent and easy to use.

SkyCiv Structural 3D, a cloud-based Structural Analysis program, allows users to design, analyze, and model complex 3D structures. It can be used online and does not require installation. SkyCiv Structural 3D is the best online structural analysis. It includes the following: – Powerful Analysis: Linear and P-Delta Cables, Buckling Plates, Frequency RS - Integrated design checks for steel, wood connections, foundations wind (AISC. NSD. AISI. EN. AS. CSA. BS plus more ...)

Multiphysics software from COMSOL allows you to simulate real-world designs, processes, and devices. Multipurpose simulation software that uses advanced numerical methods. Fully coupled multiphysics and single physics modeling capabilities. The entire modeling process, from geometry to postprocessing. Easy-to-use tools for creating and deploying simulation applications. The COMSOL Multiphysics® software provides a consistent user interface regardless of engineering application or physics phenomena. Add-on modules offer specialized functionality for electromagnetics and structural mechanics. You can choose from a variety of LiveLink™, products to interface with CAD or other third-party software. COMSOL Server™ and COMSOL Compiler™, allow you to deploy simulation applications. This software platform allows you to create simulation applications and physics-based models.

Software for finite element analysis using CAD-embedded software. You can use a wider range of study types and materials to aid your analysis. Inventor®, Nastran®, provides finite element analysis tools for engineers and analysts. Simulation includes many types of analysis, including dynamics, heat transfer, linear and nonlinear stress and dynamics. Inventor Nastran can only be found in the Product Design & Manufacturing Collection. The Product Design & Manufacturing Collection includes advanced simulation, 5-axis CAM and nesting tools, as well as AutoCAD and Fusion 360.

FEATool Multiphysics – "Physics Simulator Made Easy" – a fully integrated physics simulation, FEA and CFD toolbox. FEATool Multiphysics provides a fully integrated simulation platform that includes a unified user interface for several multi-physics solvers such as OpenFOAM and Computational fluid dynamics (CFD), including SU2 Code and FEniCS. This allows users to model coupled physics phenomena, such as those found in fluid flow and heat transfer, structural, electromagnetics acoustics and chemical engineering applications. FEATool multiphysics is a trusted tool for engineers and researchers in the energy, automotive and semi-conductor industries.

Ansys Fluent, the industry-leading fluid sim software, is known for its superior physics modeling capabilities as well as industry-leading accuracy. Ansys Fluent allows you to innovate and optimize your product performance. You can trust your simulation results when you use software that has been thoroughly tested across a variety of applications. Ansys Fluent allows you to create advanced physics models, analyze fluid phenomena, and more - all in an intuitive and customizable environment. This powerful fluid simulation software will accelerate your design cycle. Ansys Fluent has the best-in-class physics models. It can efficiently and accurately solve large, complex models. Ansys Fluent unlocks the potential for CFD analysis. Fluid simulation software that is fast and efficient. This software will help you to be the best in the market. Fluent's industry-leading features allow for endless innovation without compromising on accuracy.

SwiftComp is a multiscale, multiphysics composite sim code that delivers 3D FEA accuracy at the speed of simple engineering models. SwiftComp makes it possible for engineers to model composites as easily and accurately as metals using traditional structural elements in their FEA codes. This allows them to capture all the microstructural details while preserving accuracy. SwiftComp enables unified modeling of 1D (beams), 2D(plates/shells) or 3D structures. This allows for the calculation of all the effective properties. SwiftComp can be used independently to simulate composite testing or as a plug in to your existing structural tools that support high-fidelity composites modeling. SwiftComp can calculate the best structural model to use in macroscopic structural analysis and perform dehomogenization in order to compute the pointwise stresses within the microstructure. SwiftComp interfaces directly with ABAQUS and ANSYS.

Ansys Mechanical is a top-of-the-line finite element solver that can be used to improve your modeling. It has structural, thermal, acoustics and transient capabilities. Ansys Mechanical allows you to solve complex structural engineering issues and make faster design decisions. The suite includes finite element analysis (FEA), which allows you to automate and customize solutions for structural mechanics problems. You can also parameterize these solvers to analyze multiple design scenarios. Ansys Mechanical offers a wide range of analysis tools and is a dynamic tool. Ansys Mechanical provides a dynamic environment that allows you to connect additional physics and prepare geometry for analysis. Engineers of all levels can access the intuitive and customizable interface to quickly and easily find answers. Ansys Mechanical provides an integrated platform that uses finite elements analysis (FEA), for structural analysis.

GT STRUDL®, a structural engineering software, offers a complete solution. It includes 3D CAD modeling and 64 bit high-performance computation solvers in all versions. GT STRUDL has all the tools needed to analyze a wide range of structural engineering and finite elements analysis problems. It can do this accurately in a fraction the time it takes to use other structural design software. Structural design software is used by structural engineers to create safe and effective designs. It also helps them manage the complexity of many scenarios across a variety of industries, such as power, civil engineering and marine. GT STRUDL includes many quality features such as interoperability and structural analysis, database-driven designing, and quality assurance.

MSC Nastran is a multidisciplinary application for structural analysis that engineers use to perform static, dynamic and thermal analysis in the linear and nonlinear domains. It also includes automated structural optimization and award-winning embedded fatigue analysis technologies. All of this is enabled by high performance computing. MSC Nastran is used by engineers to ensure structural systems are strong, stiff, and durable. This helps to prevent structural failures (excess stress, resonance, buckling or other detrimental deformations) which could compromise structural function and safety. MSC Nastran can also be used to improve structural designs' economy and passenger comfort. Creating industry-leading product differentiations or optimizing existing designs can lead to industry advantages. Reduce downtime and costs by resolving structural problems that may arise during product service.

FLOW-3D is a highly accurate CFD software that solves transient, free-surface issues. It can help you optimize product designs and reduce time to market. FLOW-3D's multiphysics suite also includes FlowSight, our state-of the-art postprocessor. FLOW-3D is a versatile CFD simulation platform that engineers can use to study the dynamic behavior liquids and gases in a variety of industrial applications and physical processes. FLOW-3D is a free surface and multiphase simulation platform that serves a wide range of industries, including aerospace, microfluidics and bio-medical devices as well as water civil infrastructure and automotive. FLOW-3D is a multiphysics tool that is unique in its power and versatility. It helps engineers achieve their modeling goals.

Engineering groups are using niche software tools from different vendors to simulate product attributes. Multi-vendor software products can lead to inefficiencies and increase costs. SIMULIA offers a scalable suite unified analysis products that allows all users, regardless their simulation expertise or domain focus to collaborate seamlessly and share simulation data and approved methods without losing information fidelity. Abaqus Unified FEA offers powerful and complete solutions to complex engineering problems across a wide range of industrial applications. Automotive industry engineering groups can consider full vehicle loads, dynamic vibrations, multibody systems and impact/crash using a common model structure and integrated solver technology.

Flexible and powerful preprocessor for high-quality finite element meshes. Attractive price - up to a factor of ten lower than their foreign counterparts. Calculation of strength under dynamic and static loading. Calculation of vibration modes and natural frequencies. Calculation of critical loads, buckling modes and critical loads. Calculations in 2D and 3D for volumetric, thin-walled, and bar structures. Elastoplastic deformation according the mises and Drucker-prager models. Calculation of strength for large displacements. Calculation of temperature, heat loss, and temperature deformations of parts or structures. Calculation of strength for highly elastic materials.

Simcenter Nastran is a leading finite element method (FEM), solver for computational performance and accuracy, reliability, and scalability. Simcenter Nastran offers powerful solutions for structural analysis, optimization, aeroelasticity, thermal analysis and rotor dynamics. Simcenter Nastran provides all the solutions in one solver. This simplifies modeling and makes it easier to use all solution types. Simcenter Nastran is available as a standalone enterprise solver and as an integrated solver within Simcenter 3D. It helps manufacturers and engineering suppliers in aerospace, electronics, heavy machine, medical device, and other industries with their critical engineering computing requirements so they can produce safe and reliable designs in shorter design cycles.

Metariver Technology Co., Ltd. develops innovative and creative computer-aided engineering (CAE) analysis S/W based upon the most recent HPC technology and S/W technologies including CUDA technology. We are changing the paradigm in CAE technology by using particle-based CAE technology, high-speed computation technology with GPUs, and CAE analysis software. Here is an introduction to our products. 1. Samadii-DEM: works with discrete element method and solid particles. 2. Samadii-SCIV (Statistical Contact In Vacuum): working with high vacuum system gas-flow simulation. 3. Samadii-EM (Electromagnetics) : For full-field interpretation 4. Samadii-Plasma: For Analysis of ion and electron behavior in an electromagnetic field. 5. Vampire (Virtual Additive Manufacturing System): Specializes in transient heat transfer analysis.

With STAAD, you can design, analyze and document structural projects anywhere in the world. It provides a flexible solution that covers all aspects of structural engineering, starting from the foundation. STAAD is a comprehensive structural finite elements analysis and design program that allows users to analyze any structure that is exposed to dynamic, wind, earthquakes, thermal, and other moving loads. STAAD is available in a variety of versions so you can choose the one that suits you best. STAAD is a popular application for structural analysis. It is well-known for its flexibility, interoperability, time-saving abilities, and analysis. STAAD is a 3D structural analysis tool that allows structural engineers to design steel and concrete structures. An analysis model can be created from a physical model created with the structural design software. STAAD incorporates many design code standards.

SPACE GASS is a 3D analysis and design program that can be used for multiple purposes. It is able to design beams, trusses, frames, buildings, towers and tanks, as well as cable structures and bridges. Capabilities include a 64-bit multi-core solver, silky smooth 3D rendered graphics, plate finite elements, frame elements, cable elements, tension/compression-only elements, moving loads and links to many CAD and building management programs. Why SPACE GASS? You can save time and money by choosing a safe and effective design. A silky smooth interface allows you to see your changes visually. A fast sparse matrix solver which fully exploits multi-core processors' parallel processing power. There are many structural modeling tools, analysis options, and design modules. Video tutorials that will guide you through the difficult stuff. For use in floating or stand-alone networks.

nCode DesignLife is an online design tool that identifies key locations and calculates realistic fatigue life from leading finite element results for metals and composites. Designers can do more than simple stress analysis. They can simulate actual loading conditions and avoid costly design changes. Products can include functions for fatigue of welds and vibration fatigue, crack growth detection, fatigue in composites, and thermo-mechanical fatigue analysis. Advanced technology for multiaxial, vibration, crack growth and thermo-mechanical fatigue. A graphical interface that makes it easy to perform fatigue analysis using the most popular FEA results data such as ANSYS, Nastran and Altair OptiStruct. Multi-threaded and distributed processing capabilities to process large finite element models as well as complete usage schedules.

VisualAnalysis is used by thousands of professionals to meet deadlines. Customers describe it as "a great value" with "so much ease of use". You need tools that are easy to use and affordable. 3D models of buildings, tanks, towers etc. Static and dynamic response analyses. Design code checks for wood, concrete, steel, cold-formed steel and aluminum. Includes complete analysis and design features, including automatic plate meshing and nonlinear elements. 3D static and Dynamic FEA for civil engineering, mechanical, aerospace, or any other structural analysis. Support for building code load combinations is optional.

Ansys Sherlock, a reliability-physics-based electronic design tool, provides fast and accurate life predictions at the component and board levels for electronic hardware in early design stages. Ansys Sherlock automates the design analysis of electronic hardware. It provides accurate and fast life predictions at the component, board, and system levels during early design stages. Sherlock bypasses the 'test-fail-fix-repeat' cycle by empowering designers to accurately model silicon-metal layers, semiconductor packaging, printed circuit boards (PCBs) and assemblies to predict failure risks due to thermal, mechanical and manufacturing stressors--all before prototype. Sherlock quickly converts embedded libraries containing more than 500,000 parts into computational fluid dynamics and finite element analysis models. Each model includes accurate geometries, material characteristics, and stress information.

SimScale, a web-based cloud application, plays an important role in simulation software for many industries. The platform supports Computational Fluid Dynamics, Finite Element Analysis (FEA), as well as Thermal Simulation. It also provides 3D simulation, continuous modeling, motion & dynamic modelling.

Inspire is a collaborative tool that accelerates the creation, optimization and study of innovative and structurally efficient parts and assemblies. It can be used early in product development. Inspire's award-winning user experience for geometry modification and creation can be learned in a matter of hours and delivers reliable Altair solver power. As independently validated and verified by NAFEMS, structural analysis can be performed with the speed and accuracy provided by Altair®. SimSolid® allows for the analysis of large assemblies and complex parts. Dynamic motion simulation and loads extraction using the reliable multi-body system analysis of Altair®, MotionSolve®. The industry standard for structural efficiency, topology optimization of Altair® OptiStruct®, for the generative designing of practical, viable and manufacturable geometries. Inspire allows both designers and simulation analysts to do what-if analyses faster, easier, earlier, and more collaboratively.

VSim is the Multiphysics Simulator Software that design engineers and researchers use to solve difficult problems. VSim's unique combination Finite-Difference Time Domain (FDTD), Particle in Cell (PIC) and Charged Fluid(Finite Volume), delivers accurate results in a variety situations, including plasma modelling. VSim is a parallel software program that can efficiently solve large scale problems. Simulations are run quickly using algorithms for high-performance computing systems. Trusted by researchers from 30 countries and used by engineers in a variety of industries, including aerospace and semiconductor manufacturing, VSim delivers results that are reliable. Tech-X's code was created by a group of computational scientists. VSim is available at many of the top research institutions around the world.

Engineers and researchers can use WELSIM finite-element analysis software to create prototype virtual products and conduct simulation studies.

CFD is the only comprehensive, intuitive platform available for multidisciplinary design. Computational Fluid Dynamics (CFD) is a multiphysics system analysis technique that simulates fluid behavior and thermodynamic properties by using numerical models. Engineers can use the Cadence Fidelity CFD Platform to reduce the time and cost of physical testing for design processes such as propulsion and aerodynamics. The Fidelity CFD Platform is an end-toend CFD solution that is easy to use for multidisciplinary design, optimization, and other applications in the aerospace, automotive turbomachinery and marine industries. The platform's streamlined workflows and massively parallel architecture along with state-of-the art solver technology provide unprecedented performance and accuracy for today's design problems.

S-FRAME allows users to model, analyze, and design any structure, regardless of its geometry, material type, loading conditions or nonlinear effects. S-FRAME's automated frame generators quickly create models and import them with BIM or DXF import links. Users can also maximize productivity with integrated concrete/steel design tools that allow for design, optimization, code compliance and report generation. S-FRAME allows users to quickly create structures using modeling automation. They can generate regular framework structures and custom trusses. Users can also use clone tools for replicating a portion or all of the model. Importing existing BIM or DXF models can also help users save time. S-FRAME's advanced meshing tools create a finite element mesh. This allows users to generate detailed analysis results for their specific areas. These areas can be explored by users easily converting members into multi-shell models.

samadii/em oftware that analyzes and calculates the electromagnetic field in 3d space using the Maxwell equation using vector FEM ad GPU computing. it provides electrostatics, magnetostatics as well and induction electronics, including the low-frequency and high-frequency ranges. samadii/em provides a multi-physics approach and high-performance electromagnetics simulation, with Samadii you can quickly address problems from semiconductors and displays to wireless communications, etc.

FloCAD®, a fluid dynamics module for Thermal Desktop®, and together they provide a complete thermohydraulic tool for integrated fluid flow analysis and heat transfer analysis. FloCAD is very similar to building thermal models. Many of the commands can be used to build fluid flow models. FloCAD models are available in two formats: they can be free-form (non geometric), sketchpad-style flow network modeling for abstraction, simplification, and convection to finite differences of finite element representations. FloCAD is a generalized software tool for capturing pressure drops in a piping system due to bends and valves, tees and changes in flow area.

Simcenter Femap is an advanced simulation program that allows you to create, edit, and inspect finite element models of complex products and systems. Simcenter Femap allows you to create complex models of components, assemblies, and systems. This allows you to determine the model's behavior when it is exposed to real-world conditions. Simcenter Femap, which is a powerful data-driven and graphically driven results visualization and evaluation, can be combined with Simcenter Nastran to provide a comprehensive CAE solution that enhances product performance.

CONSELF allows you to use Computational Fluid Dynamics and Finite Element Analysis (FEA), which can be used to improve the design of your product: minimize drag and fluid dynamics losses; maximize heat exchange performances; estimate pressure loads; verify material resistance; evaluate components shape deformation; calculate natural frequencies, modes and other modes. Structural Mechanics can be performed dynamically or statically, using both elastic and non-elastic materials. You can also perform frequency and modal analyses starting from the most common CAD neutral file formats.

NVIDIA Modulus, a neural network framework, combines the power of Physics in the form of governing partial differential equations (PDEs), with data to create high-fidelity surrogate models with near real-time latency. NVIDIA Modulus is a tool that can help you solve complex, nonlinear, multiphysics problems using AI. This tool provides the foundation for building physics machine learning surrogate models that combine physics and data. This framework can be applied to many domains and uses, including engineering simulations and life sciences. It can also be used to solve forward and inverse/data assimilation issues. Parameterized system representation that solves multiple scenarios in near real-time, allowing you to train once offline and infer in real-time repeatedly.

Patran offers a set of powerful tools to help you create analysis-ready models for linear, nonlinear and explicit dynamics solutions, thermal solutions, and more. Patran's tools make it simple for anyone to create FE-models. From geometry cleanup tools to help engineers deal with gaps and slivers, to solid modeling tools to allow creation of models completely from scratch, Patran is easy to use. Surfaces and solids can be meshed using fully automated routines, manual methods for more control, or a combination of both. Finaly, loads, boundary condition, and analysis setup are built-in for most popular FE Solvers, reducing the need to edit inputs. Patran's comprehensive, industry-tested capabilities ensure that virtual prototyping efforts deliver results quickly so that you can evaluate performance of products against requirements and optimize designs.

In markets where safety of welded assemblies are essential, analysis using TRANSWELD®, offers a global solution to anticipate welding defect. Our simulation software integrates multiple physical models to simulate the actual behavior of the metal when it is in a liquid/mushy condition to perform a comprehensive analysis of the material's evolution. TRANSWELD®, enables the study of the microstructure in the solid-state assembly. You can then ensure the conformity without having to go through the prototyping phase. Our software is 100% predicative. You can observe welding processes numerically using real conditions. You can, for example, visualize the heat source movements during the simulation of laser or arc welding.

Energy2D, a multiphysics simulation program based on computational physics and combining particle dynamics, models all three modes for heat transfer: conduction, convection and radiation. Energy2D runs fast on most computers, eliminating the need to switch between preprocessors and solvers and postprocessors that are usually required for computational fluid dynamics simulations. It allows you design "computational experiment" to test a hypothesis or solve a problem in engineering without resorting complex mathematics. There are also plans to support different fluid types and incorporate other types energy transformations. Energy2D's conduction is very accurate, but its convection and radioactivity parts are not. Energy2D should therefore be considered qualitative in cases involving convection and/or radiation. Energy2D has been used in more than 40 scientific publications.

SIMULIA is powered by the 3DEXPERIENCE®, platform. SIMULIA provides realistic simulation applications that allow users to see the world around them. SIMULIA applications speed up the process of evaluating performance, reliability, and safety of products and materials before committing to physical prototypes. Powerful simulation of structures, fluids and electromagnetics scenarios, including complex assemblies, directly linked to the product data. The 3DEXPERIENCE Platform integrates modeling, simulation, visualization technology, process capture, publication and re-use. Customers can maximize the value of their existing investments in simulation horsepower by allowing simulation data and results to be connected to the platform. This allows for true corporate assets that fuel innovation for all users.

Simcenter STAR -CCM+ is a multiphysics fluid dynamics (CFD), software that simulates products under real-world conditions. Simcenter STAR–CCM+ is a unique CFD simulation toolkit that allows for automated design exploration and optimization. This integrated environment contains everything you need, including CAD, automated meshing and multiphysics CFD. It also includes sophisticated postprocessing and design exploration. Engineers can efficiently explore the entire design space and make better design decisions quicker. Simcenter STAR -CCM+ provides additional insight that can be used to guide your design process, resulting in more innovative products that meet customer expectations.

Simufact welding is a modular product line that provides extensive functionality for modeling the elastic-plastic behavior and structural weld simulation. The software can be used to simulate different welding processes. Simufact Welding allows you to simulate a wide variety of thermal joining processes using structural welding simulation. This includes brazing, arc and beam welding processes. Simufact Welding also allows you to model heat treatment, variations of cooling, unclamping setups, and mechanical loading of welded structures.

EMWorks offers the best-in-class electromagnetic simulation software to support electrical and electronic design. It also has multiphysics capabilities. The company's products can be seamlessly integrated in Autodesk Inventor® and SOLIDWORKS. Applications include power electronics, antennas and RF components, signal integrity and power of high speed interconnects, and electromechanical and power electronics. EMS is an electromagnetic field simulation program that can be used to optimize electromagnetic and electromechanical devices, such as transformers and electric motors, actuators and sensors within Autodesk®, and Inventor®.

Simulating and analyzing your product design will reduce the cost of physical prototyping and increase your products' durability and reliability. It is crucial to your product development to use digital prototypes to understand the performance of your designs in real-world situations. Creo Simulation was designed exclusively for engineers. It includes structural, thermal and vibration analysis solutions, as well as a comprehensive set finite element analysis (FEA). You can validate and analyze the performance of 3D virtual prototypes with Creo Simulation before you even make the first part. We offer unique and flexible simulation solutions to our customers. This section will give you a better understanding of what we can do to meet your needs. Contact a Creo representative if you have any questions regarding our tool stack.

CalculiX allows you to build, calculate and post-process Finite Element Models. The interactive 3D tool for the pre- and after-processor uses the openGL API. The solver can perform linear and nonlinear calculations. There are solutions for static, dynamic and thermal problems. Both programs can run independently. The solver uses the abaqus format for input, so it is possible to use pre-processors from commercial companies. The pre-processor can write mesh data for nastran abaqus ansys code-aster as well as the free-cfd-codes dolfyn duns ISAAC OpenFOAM. Included is a simple step reader. External CAD interfaces can also be used. The program can run on Unix platforms such as Linux and Irix but also on MS Windows.

SolidFEA, our innovative solid finite-element analysis tool, is designed to make advanced structural design affordable and accessible. It is powered by the Calculix engine and offers detailed sub-model analyses at a lower cost and with less hardware than competitors such as Abaqus. SolidFEA is ideal for complex engineering challenges such as steel connections and bridge design. Its ease of use, IFC file compatibility and ease of use make it a great complement to our GenFEA structural analysis software. SolidFEA is a revolutionary step in structural engineering, bridging a gap that existed for ages due to prohibitive costs, complicated learning curves and high-end computing demands associated with solid finite elements analysis (FEA). It is designed for ease of use and supports IFC file formats, making it an easy addition to engineering workflows.

Adaptive Research is pleased announce the immediate release CAESIM 2024, a simulation platform that provides advanced computational fluid dynamics modeling capabilities with multi-physics capabilities. The new release of software provides new tools and features that optimize the modeling process, and provide CFD engineers with fast simulation solutions.

Fatigue Essentials is a desktop program that can be used to efficiently perform structural fatigue analysis. Fatigue Essentials is a user-friendly program that allows you to conduct stress-life analyses using either classical stress calculations or linked to FEMAP™, and using the finite element-generated stresses. The program follows a tree structure to guide users through the analysis. The following load, material, and spectrum branches provide general options for analysis. There are options for input methods and variations within each branch. Analyses results can be viewed on-screen and used to create reports or damage contour plots in FEMAP. Covers most engineering requirements. Classic mode with user input stress. Professional mode (FEMAP-linked). This mode allows you to read nodal stress and push back results in damage contour plots. You can choose to either input stress and cycles interactively or file input.

Ansys LSDYNA is the industry's most popular explicit simulation software. It can be used for applications such as drop tests, impact and penetration, occupant safety, and many more. Ansys LS DYNA is the most widely used explicit simulation program in this country. It can simulate the response of materials to short periods and severe loading. You can simulate complex models using the many elements, contact formulas, material models, and other controls. LS-DYNA provides a wide range of analyses with fast and efficient parallelization. Engineers can solve simulations that involve material failure. They can look at how the failure progresses through parts or through systems. It is possible to model complex interactions between parts and surfaces, as well as the load passing and interactions between them.

In times of tight schedules or limited resources, integrated solutions are crucial. RIBTEC provides many synergies in calculation design, construction, and design. In the context of Building Information Modeling (BIM), you can benefit from a faster data flow that streamlines the entire process of structural design. RIB's software solutions are available for structural engineers. They include building, ground, and finite element calculations as well as tunnel and bridge construction as well as the drawing of formwork or reinforcement plans. Since 1961, RIB has been a pioneer in structural design and FEM. Over 5,000 engineering offices, inspection and construction engineers, as well as planning departments from the public and private sectors use the RIBTEC programs. RIBTEC covers all aspects of structural design with more than 100 programs.

AxisVM's primary uses are in the design and construction of buildings and industrial and geotechnical structures. It is a powerful finite element solver, as well as practical modeling tools. This allows it to be used in bridge design and the design of composite structures, vehicles, and machines. There are optional design modules available for structures made from reinforced concrete, steel and timber, as well as masonry members and connections. AxisVM's special elements and analysis capabilities allow users to design innovative and custom structures. Reports can be created using drawings, tables, and detailed design calculations. Reports can be automatically updated, i.e. Reports are generated using the most recent model data and results.

DigitalClone for Additive Manufacturing (DCAM) is a comprehensive suite of metal additive manufacturing simulation and modeling capabilities that allows for seamless design and analysis support. DC-AM uses a multiscale, multi-physics analysis approach to link the process - microstructure and fatigue relationship of additively produced parts to enable computational assessment for quality and performance. DC-AM encourages the adoption of AM in safety-critical sectors by providing unprecedented insight into build conditions and the characteristics and final parts. This allows for a reduction in time and cost, as well as allowing for a reduction in the time and costs required to qualify parts.

The FEA program RFEM enables quick and easy modeling, structural, and dynamic calculation as well as the design and construction of models with member and plate, wall, folded plates, shell, shell, and other solid elements. Modular software allows you to connect the main program RFEM to the appropriate add-ons to meet your specific requirements. Structural analysis program RFEM offers structural engineers a 3D FEA tool that meets all modern civil engineering requirements. Simple and complex structures can be modelled with ease thanks to efficient data input and intuitive handling. The basis of a modular software program is the structural analysis program RFEM. The RFEM basic program is used to create structures, materials, loads, and plans for spatial and planar structural systems that include plates, walls, shells and members. You can also create mixed structures and model contact elements.