Alternatives to QMSys Calibration Management

The SBS QMS Suite consists of 5 software modules that work together for efficient Quality compliance: SBS Quality Database - CAPA / 8D corrective and preventive actions (CAR) with root cause analysis - Nonconformance management - Risk analysis including FMEA, SWOT, interested party risk register - Internal, customer, and third-party audit management - Environmental Health and Safety (EHS / HSE) management SBS Ground Control - Employee training management (LMS) - Self-Paced training - Document control SBS Asset Tracking Database - Calibrated equipment control - Preventive maintenance - Asset inventory management SBS Inspection Database - Record incoming material, in process, and final product inspection data - Generate real time SPC charts - Inspection plans and Control Plans - Archive data for further statistical analysis SBS Vendor Management - Maintain an approved vendor list or AVL - Develop vendor / supplier qualification plans - Maintain vendor / supplier qualification history Modules may be purchased separately or in any combination.

Qualityze EQMS Suite is a next-generation Enterprise Quality Management Software. It is specifically designed for businesses to efficiently manage their quality processes, customer expectations and compliance requirements. It helps them address operational challenges so they can achieve excellence in terms of quality, safety and reliability. It comes with pre-defined templates for controlled documents, audit checklists, regulatory forms, material compliance reports and many more. Qualityze EQMS Suite is a set of 14 integrated modules that help create a closed-loop system to manage end-to-end quality from anywhere. Our range of smarter quality solutions is built on the Salesforce.com technology platform. These modules are Nonconformance Management, CAPA Management, Document Management, Change Management, Audit Management, Training Management, Supplier Quality Management, Inspection Management, Customer Complaints Management, Material Compliance Management, Forms Management, Permit Management, Calibration Management, and Maintenance Management, Forms Management and Field Safety Management. Our Quality Management solutions help create a culture of quality and continuous improvements by proactively mitigating quality issues.

TLM QMS Software is a powerful and robust quality, risk and material management software (QMS) which is validated and 21 CFR Part 11 compliant. TLM is a cutting-edge, all-in-one quality management system that can be customized to integrate with online CRM software, QuickBooks or ERP databases. Total Lean Management (TLM) QMS Software is specifically intended to be a low cost, highly integrated, flexible and continuously improving landscape to which specialty systems can be added where needed to create the digital business landscape that enables work flows the way your company needs them to work.

Calibration Control (CC), is used for maintenance, calibration, and general asset management. You can quickly and visually track equipment that needs calibration or maintenance using customizable highlighted grids or auto emails. Audit trails are maintained to track equipment traceability, people and companies, as well as attachments, certificates, and other information. Automate calibration control with custom or default barcode labels scannable by time-saver dialogs to increase speed. You can create custom reports or modify existing ones using the Report Designer. CC is used by ISO, FDA, and ANSI quality systems to maintain compliance and communicate that compliance to auditors or internal customers. Although CC was developed in a manufacturing environment, it can also be used in other industries such as Metrology Services, Health Care, Aviation/Aerospace, Mining, Testing, Maintenance, Designer Engineering, Oil Wells, Distribution, Packaging, among others.

SPC-PC IV Explorer, a leading Statistical Process Control Software (SPC) package, is used for quality assurance, capability evaluations, streamlined process data management, and reporting. -Manage process information with cascading folders that are grouped by customer, department and product. -Password-protected concurrent use licensing controls access to features -Process Monitor charts give a dashboard view of KPI -Quickly analyze keyboard and data imported from Excel or other ODBC sources like ERP, SAP, LIMS, or LIMS. -Data entry via electronic gaging is supported in the optional Work Set view -Customized reports can be exported to Word with charts, data, or any other information as required -Show stratification patterns by using symbol shape/color or filter data using traceability field. Optional Web SPC interface to report, data entry and process monitoring throughout your supply chain without the need for a local installation -Optional Calibration Management or separately as QA–Calibrate

The MOX CMS Module provides comprehensive enterprise-level tools to manage M&TE and laboratory workflows. CMS is the ideal solution to manage calibration operations for any organization that values flexibility and has the latest features. The MOX MPS Module offers state-of the-art capabilities to design, automate and execute calibrations. MPS is a cutting-edge metrology software that offers advanced uncertainty modeling capabilities and cutting edge metrology engineering solutions. This puts MPS far ahead of any other software. The MOX IMS Module is a web-based enterprise tool for tracking and maintaining M&TE, and other tool inventories. Your organization can quickly track asset status, location and usage using an intuitive interface and simple to use features.

For the continued success of your business, accurate and timely calibrations are essential. AutoCal software was developed from this perspective. Our Autocal calibration software allows you to plan and perform high-quality calibrations and measurements. The software was developed in accordance with international metrology standards. AutoCal software is brand independent. This means that it can work with solutions from us as well as solutions from other brands. AutoCal software is easy to use with laboratory and field instruments. It also has many functionalities that save you time and money. The database can be used to safely and quickly up- and down-load data, making it easy to save, manage, and plan calibrations. AutoCal optimizes workflows by optimizing them. AutoCal's simple operation has led to worldwide organizations using it.

Manufacturers are now more demanding than ever about reporting, traceability and continuity of data. Intelligent 3D CAD is now the standard in manufacturing. They continue the digital thread through the entire manufacturing process. Verisurf software allows you to see the difference in real-time between the nominal CAD and the finished machine parts. Ideal for a quick, in-process inspection of a first article or an automated production inspection to improve your manufacturing enterprise. Setup of inspection plans can be reduced from hours to minutes, with little or no learning curve. Click-and-build visual interface allows you to use any CMM. Automate quality processes by creating repeatable measurement plans that can be used with any CMM, whether it is portable, manual or programable. Identify deviations and tolerance conditions in measured parts compared to nominal CAD with a premium user interface. With intelligent MBD, you can inspect drawings or CAD models and directly measure primitive features or complex profile.

There are many analysis packages that can measure everything, from machined parts to blades, screws compressors, gears, and camshafts on a wide variety of CMMs. QUINDOS is the most popular modular metrology software for complex geometries in engineering, energy, automotive and aerospace. You can choose from a variety of modules to create precise measurement applications. You can design your application and customize the UI for your machine operator. QUINDOS is highly programmable, even for complex geometries. It also offers structured programming and the ability to create a custom command library with UI support. Siemens AG Turbines uses QUINDOS and I++ Simulation high-pressure blades to visualize production and measurement in one step. BMT Aerospace uses QUINDOS & I++ Simulator to simplify production and provide offline testing with a virtual measuring area.

Gage and instrument measurement instruments for gage calibration laboratories or the mechanical industry. Gage and Instrument inspection are important factors in the accreditation of quality systems to ISO 9001 and IATF 16949. Our product range can inspect solid (hard) gage such as a thread plug, plain plug, plain and ring, pipe thread and snap gage. Inspection of hard-solid gage. Reference gage. Master and other gages.

Prime Technologies has been a leader in calibration and maintenance management software for almost three decades. Our programs are used by thousands of companies all over the world to eliminate paper. The program has powerful math and data verification capabilities to meet FDA, ISO, and other regulatory requirements. The program supports both off-line and automatic calibrations using tablets/laptops, and documenting process calibrators. Each version is pre-validated and 21 CFR Part 11 compatible for life sciences facilities. Accounts can be divided and configured to suit the preferences of a single site or harmonised for enterprise-level deployment. Integration to ERP, CMMS and LIMS can be achieved using APIs and technical support.

Caliber v18 improves the performance of your company's gauge systems by automatically capturing and generating Dues and status. By maintaining proper tracking and proper maintenance, the company can protect its investment in measuring devices. It saves time by allowing you to quickly look up multiple gages and then entering them with minimal data entry. The user-friendly gage calibration software reduces session time. Ensures that all quality requirements (ISO 9001, ISO13485, ISO 14001; ISO 17025; ISO 17025; TS 16949, TS 16949, TS 16949, TS 16949, TS 9399; AS 9100; 21 CFR Part 11, and many others) are met or exceeded.

We're making inspection simpler. Data from 3D scanners, and other devices, can be captured and processed automatically. Measure, understand and communicate inspection results without any human interaction. Quality Assurance is a must in every production environment. We're making 3D scanning-based inspection easier. Integrate with the majority of scanners and PCMMs available on the market to improve inspection agility. The intuitive UI makes complex metrology easier to understand. Automate repetitive tasks using visual scripting to prevent false part scrappage. Reduce costly downtimes by measuring correctly the first time. Recreate blades and Blizks using efficient turbine blade averaging workflows. Volumetric reporting is fast and accurate, ideal for planning and costing additive production of heat-exchangers. Automate an inspection routine even when the reference geometries change from patient to patient.

TANGRAM is a flexible, intuitive, and very capable metrology software. It does not require any programming knowledge and can be tailored to the needs of each customer. TANGRAM was developed for users that need simple, easy-to use metrology software. TANGRAM is the final component of the flexible gauging system and CMM functionality. It offers the right balance of functionality, performance, and usability. In-line, graphic element reporting simplifies the evaluation of element form and position deviation. Simplified and advanced creation of reference systems. Measurements can be stored in Access databases and accessed by other applications for special calculations, statistics and integration with other applications. Advanced users can add special calculations using a Pascal-like internal language. Geometric tolerance and relationships between elements, and a dry-run mode to check program flow.

DataLyzer Gage management software has been on the market for 40 years and is a complete webbased solution to calibrate gages and MSA research. It is fully integrated into our quality suite, which includes FMEA and SPC as well as OEE. It includes the following features: - Calibration of gages - Checking in and out of gages - Gage R&R and Kappa studies - Printing of calibration stickers.

KurtSPC Premium statistical control software allows you collect data from many devices and to provide it at one place optimizing your manufacturing. Statistical process control (SPC), is used to monitor and control a process in order to make sure it runs at its best. A manufacturing process can produce as many conforming products as possible while minimizing waste. This is its full potential. KurtSPC Premium statistical control software is an easy-to use, simple-toconfigure solution for process optimization. KurtSPC Premium software includes user-definable error codes, collection fields, and graphical/text operator instructions. It supports voice and video, custom screens and reports, machine control controls, and automated gaugeging. It supports almost all types and models of gages, metrology tools, networking, as well as Kurt's powerful Event/Actions.

Supporting everything from manual to fully automated calibration all using your lab's 17025 measurement uncertainty calculations. With Metrology.NET's standardized module-based "taxonomy" approach, creating automation has never been faster. New automated calibration procedures are created in three easy steps. First, create the test points with pass-fail limits. Next, add the instrument setting, and finally, create a VISA script using Metrology blocks. Metrology.NET is all about the reuse of software tools across all disciplines, which is an efficient use of resources. Metrology.NET does it all, DC & low frequency, RF and microwave, torque, temperature, flow, force, humidity, mass, pressure, you name it. Plus, everything is designed on a sustainable software framework. As 21st-century engineered software, Metrology.NET incorporates the best of current technologies. Not just buzzwords, Metrology.NET is truly a scalable, low-code, future-proof solution built for metrology.

It tracks Daily Inward, Calibration Record sheets and Calibration Certificates, Invoicing, Payments Received, Measurement Uncertainty Calculation, and Invoicing. ICPro provides many benefits for organizations by providing information about lab reports such as pending calibration equipments and due payments, service tax details (calibration history, calibration due), delivery performance, etc. InstaCalPro is a powerful gauge management software that allows you to manage all of your measurement instruments and gauges. It generates calibration schedules, and alerts you to past and failed calibrations. It quickly confirms if you have a particular gauge size or type.

RadSight ID: Asset tracking software that stores, tracks, maintains, issues, and returns many types of instrumentation. Tracking instrument maintenance and calibration activities. Configurable calibration protocols. Integration with barcode readers allows for rapid inventory checks.

Mitutoyo MCOSMOS is a proprietary metrology suite consisting of interrelated modules, as well as dedicated expansion modules (32- or64-bit) for Microsoft Windows 7,8,8.1 and 10 operating system. MCOSMOS is available in 37 countries, and in 12 different languages. It sets the standard for metrology software. MCOSMOS allows integration between a wide range of applications. This improves the efficiency of your CMM, and increases productivity in your quality control functions. Expansion modules, such as GEOPAK, are available for specific applications, including gear measurement, reverse engineering, airfoil analyses, and integrating metrology with CAD. Modular MCOSMOS allows you to customize your measuring software to include only the modules required to meet requirements. The measurement results can be displayed, printed and archived in a variety of built-in formats and user-defined formats.

METROLOGX4: Universal 3D Measurement Software Metrolog allows you to upscale your quality inspection. Get a real performance accelerator to power your 3D measuring devices, and more. Metrolog X4 architecture not only benefits from current computer and OS technology significantly increasing performance and metrology software throughput but also simplifies your day to day measurement workflow.

Mitutoyo's MeasurLink software provides complete support for your manufacturing control system. MeasurLink 9 provides online data collection, SPC charts, analysis, quality control/supervisor alerts and reports, and all of this in real-time for your entire manufacturing system. MeasurLink is designed to create a quality-sharing system for integrated network, and includes a comprehensive data collection solution for your business. MeasurLink standard real-time functions as a clearinghouse for data acquisition by allowing you to connect virtually any measuring device and acquire data. It supports a wide range of metrology technologies including calipers and micrometers as well as indicators, CMMs, Vision Systems, and more.

Measure-X®, metrology software, offers power without intimidation. It can be used to create part measurement routines or to operate an OGP system within a production environment. Measure-X®, a metrology software, offers a complete set of image processing tools and autofocus, as well as geometric functions, ANSI/ISO tolerences, easy editing and contour analysis. Compatible with touch probes and lasers. When datum features are large enough to allow for mobility, users can address more complex GD&T needs such as true position and profile of features. Display and reporting capabilities provide both graphical, colored whiskers of deviation and GD&T callsouts on the part CAD.

Software that allows you to measure, evaluate and manage your metrology operations can help you increase their performance. For testing freeform surfaces, you need a lot of measuring points. This purpose is met by the software architecture of ZEISS CALIGO. ZEISS has been working in reverse engineering and tool correction since over 20 years. ZEISS REVERSE ENGINEERING's new structure will be available in summer 2019. It is a basic module that can be used for reverse engineering and includes the options "Tool Correction" or "Volume Calculation." Users have the option to choose the one that best suits their needs. The software's user guide is very simple: it guides users through each step of the process. This greatly reduces training costs. A three-day seminar is all that's required to learn the intricacies of the software.

Hexagon Manufacturing Intelligence collaborates with manufacturers to develop solutions for the smart factory. Our software and hardware solutions use data to connect departments, embed continuous-learning into every stage of the production process, and place intelligent quality at heart of product lifecycle. Quality drives productivity by allowing data to inform decision-making, from concept to reality. Hexagon Manufacturing Intelligence offers industrial metrology systems that can be used for dimensional measurement. Hexagon Manufacturing Intelligence is the largest software developer in the metrology industry and offers a wide range of in-house developed, individually-customizable software packages that deliver intelligent and effective data acquisition, analysis and evaluation as well as powerful data management and reporting tools.

High Precision 3D Metrology. High precision 3D metrology from ISRA ensures zero defects in product delivery and customer satisfaction. The precision metrology systems of ISRA measure all objects and surfaces down to the nanometer level, while ensuring the fastest cycle times. ISRA has the right system for every inspection task, from precise measurements to defect detection. Our 3D measurement systems allow for detailed inspections down the nanometer level in the test laboratory, on the production line, or during random sample testing. Our solutions are designed to provide high precision and quick measurement times. They can be configured in a variety of configurations to suit your needs and ensure maximum process reliability. The user interface is simple and intuitive, making it easy to configure measurement tasks. 3D Form Monitoring Ensure components work correctly and can be fitted with efficiency form monitoring. ISRA's 3D Form Measurement Systems capture component geometries down

Vantek Calibration Control Software is a complete calibration and gage tracker system for all types and makes of gages. It allows you to create calibration reports and organize important data. Calspex is a program that allows you to calibrate and enter data using a procedure. It guides you through the calibration process and prompts you to only enter the necessary information. The generated calibration report is informative and concise. Reports can be saved to a local or network drive for easy access. Printing hardcopies of reports is not required. The integrated Thread Calculator is available for calibrating threaded rings and threaded plugs to quickly and accurately calculate all dimensions. The software will calculate the master dimensions for your thread by simply entering the thread form, nominal diameter, pitch, and other information. The calculator supports non-standard thread sizes, special threads, custom lengths of engagement, and other thread wire sizes.

CAQ.Net software solutions are in action all around the globe wherever it is important to ensure the quality, safety, and functionality of products and services. Whether strategic quality management or operational quality assurance – thanks to its high degree of automation and uniform data structure, CAQ.Net facilitates effective process management, proactive failure prevention, and a company-wide quality mindset.

MicMac is a free, open-source photogrammetric suite (Cecill B license) that can be used for a variety 3D reconstruction scenarios. Although it is primarily intended for academic or professional users, constant efforts are made in order to make it more accessible to all. MicMac's versatility is one of its strengths. It can be used in many fields, including cartography, environment and forestry, archaeology, heritage, archaeology, and other industries. MicMac allows the creation of 3D models as well as ortho-imagery, when necessary. MicMac can be used to create any type of object, including small objects or statues that are acquired from the ground. It can also be used to acquire buildings, cities, or natural areas via satellite or aerial acquisitions. The tools also allow for the georeferencing of the end products in local/global/absolute coordinates system. Other complementary tools allow for the exploration of metrology, site surveying, and other related fields.

MET/CAL®, Plus Calibration Management Software is a complete solution to automate calibration processes and manage and report measurement assets. MET/CAL Plus contains two applications: MET/CAL software which is the industry leader in automated calibration; and MET/TEAM express or the more comprehensive MET/TEAM software to manage test and measurement assets. MET/CAL software is able to reduce calibration time by automating all of your electrical and radio frequency calibration tasks. Documented procedures, calibration results, and reports help you comply with quality standards such as ISO 9000, ANSI Z540, and ISO/IEC 17025.

Scheduling gage calibrations and verifications. All activities should be documented. Measurement System Analysis (GRR. Stability. Bias. Linearity. Attribute Crosstab). Record before/after readings for the entire operating range of the gage are some of the key elements. Gage calibration schedules can be based on gage usage or time interval. External documents (e.g. Link external documents (e.g. calibration certificate) to a calibrator record. Calibration procedure - steps that are not required to format the gage. User-defined custom fields. Data Security - allows you to restrict edits to existing calibration records. Audit Trail - preserves the history of all calibration records prior to any edit. Reschedule gage calibration due dates that fall on holidays or weekends Flexible report filtering (overdue, date range, gage id, location etc.)

Altegra's GageManager software is a fully-featured calibrator management software. GageManager allows service and repair facilities to ensure that their equipment is accurately and quickly calibrated. GageManager's functionality includes inventory management, calibration scheduling and measurement system analysis (MSA). It also features a dashboard-based screen design that allows users to easily access information about calibration status.

One-stop shop. There won't be multiple calibration vendors. Calibration, Repair, and New Equipment Sales are all available to manage the asset life cycle. Southern California has the largest number of onsite calibration facilities. Nobody beats us. Technicians create certificates on the spot. No waiting for certificates. Expert and high-quality calibration of all major equipment types. We are focused on customer service: You will always receive prompt responses. Southern California residents can receive weekly pick-up delivery. Cloud Calibration Management xTrak can be used on a tablet or a PC. Six consecutive years of zero deficiencies in A2LA ISO Audits. Since 1997, xTrak®, a cloud-based calibration management software, has been serving the Aerospace, Medical and Automotive sectors. After each service, calibration records and statuses will be automatically updated. You can now focus on your core business by reducing the time required to calibrate.

Regulated manufacturers face dual challenges in meeting stringent quality standards while still delivering profitable products. CERDAAC solutions automate, coordinate, validate, onboard, and other processes that are related to production to ensure compliance and reduce costs. CERDAAC provides a wide range of highly configurable solutions for your most critical operations, quality, and compliance challenges. All your calibrations, verifications and repairs, both in-house or outsourced, can be managed by CERDAAC. Automate service scheduling, notifications, and compliance to ensure timely compliance. Electronic certificates and FDA-compliant digital signings make it easy to go paperless. All asset information and service history can be stored in one place.

THE QUALITY OF YOUR CALIBRATION MANAGEMENT SOFTWARE MATTERS. It matters because the quality and safety of your products depends on it. With a solid 30-year track record and countless auditor recommendations, GAGEtrak calibration management software has improved quality at many thousands of facilities worldwide. Don’t compromise your products by compromising on your calibration management software; download GAGEtrak today to see the difference true quality can make. GAGEtrak allows you to better manage your workload, minimize costs, maintain production schedules and ensure customer approval while maintaining compliance with international quality standards such as FDA and ISO. Use GAGEtrak to manage gages, monitor scheduled and unscheduled calibrations, produce calibration certificates and bar-coded labels, conduct gage R&R analysis (MSA 4th Edition) and so much more. From a single user on one computer to several users on a LAN or in the Cloud, and with two levels of calibration management (GAGEtrak Pro and GAGEtrak Lite), there is a version of GAGEtrak to fit your needs and your budget. Contact us today for your free personalized web demo and free trial!

IndySoft can help you make your quality systems more efficient and effective. Our all-in-one solution will help you save time and money. IndySoft is the perfect solution for any calibration lab, large or small, and all while complying with ISO/IEC 17025. Our powerful data searching and customizable workflows will transform your operations. Multi-facility operations needing audit-ready data are best suited. IndySoft calibration management software offers global scalability, audit-ready data, and includes tooling, maintenance, uncertainty and trend analysis modules. IndySoft helps ensure you have accurate process management to meet industry requirements. It also makes your data accessible and audit-ready with digital certificates and an intuitive reporting module.

All gage information can be stored electronically, including gage history records and calibration records. For instant access to the most important functions, intuitive functionality includes menus and colorful graphics.

Medical, commercial, laptop, almost any graphic board and measurement device. Schedule tasks, receive changes, manage settings, print and export reports. The database stores tasks that can be printed and exported at any moment. PerfectLum conducts acceptance and constancy testing to ensure that the display meets all regulations such as NYC PDM and NY PDM. PerfectLum is available for free if you work in a facility that is licensed by the New York State Department of Health. PerfectLum professional calibration software automatically schedules all future tests and informs users when they are due. It is easy to handle complex and time-consuming QA procedures with just a few mouse clicks.

Novatek International provides software solutions that meet or exceed the compliance and quality requirements of the life science industry. The process specific offerings provide an integrated platform that allows for consistency and standardization across multiple departments within a single site and across multiple sites.

TurnCheck is a fast and easy-to-use software that focuses on what you are trying to measure, rather than how it should be measured. Automatic feature extraction instantly finds and measures all parts features in a single scanning. You can easily view all basic shaft dimensions in one image. Rotational scans are available for runout and form measurements, providing plots that allow you to visualize the results. Pre-programmed components are automatically rotated to allow for intelligent and fast one-touch measurements. A large number of common thread types are included in an integrated thread library for easy thread analysis. Results such as pitch, major/minor size and more can be obtained quickly. Data points can be compared to a DXF including 2D GD&T. Additional data points can also be output into optional SmartProfile®, software for advanced GD&T and 3D analysis.

CompliantPro Quality Management System Software ensures that a company's quality assurance needs are documented in one integrated system. This eliminates silos of information that can be managed as point solutions. CompliantPro allows organizations to manage their compliance and regulatory requirements beyond document control. The key areas are Environmental Health & Safety and Enterprise Risk Management, Training & Qualifications Audits, Customer / Supplier Management.

Track and schedule vehicle maintenance, inspections, and metrological controls. Keep track of all repairs you make to your vehicles. Export data to XML Spreadsheet (Office/Excel compatible), HTML, and text format files. Reminders that are custom date-based or odometer based. Vehicle insurance, traffic fines, and management of accidents. Keep track of all vehicle-related expenditures. Support for imperial (miles, gallons) and metric (kms and litres).

SpatialAnalyzer, the best portable metrology software for large-scale applications, is the most popular. SA is an instrument-independent, traceable 3D graphical software platform that makes it easy for users to integrate data from multiple instruments and perform complex tasks simply, ultimately improving productivity. SA is a highly flexible, instrument-independent, traceable 3D graphical software platform that makes it easy for users to inspect parts. Analyze data, report and reverse engineer. You can interface with almost any portable metrology instrument and automate complex operations to increase measurement and inspection efficiency. A wide range of problems can be addressed, from simple to complex. You will save time, money, effort, and ultimately, productivity. You can achieve goals you never thought possible by establishing a return on investment. Instrument-independent, SA can simultaneously communicate with virtually any number and type of portable metrology instruments.

KITRY EHS data entry or retrieval from third-party software. Qualifying events, monitoring remote file and reporting. Near-misses. Analytical management of files related workstations. Setting up workflows, producing statistical report, optional SCANOCR of paper documents. Management of workstations, homogeneous exposed groups, warnings and their actions plans, workflows and the "3 green light" process, occupational risks assessment with the possibility to configure several methods for calculating criticality indicator for hazardous situations, chemical products management and risk assessment. Ambient metrology, building management, fire plans, historizing organizational structure, web reporting on dangerous situations, configurable legal documentation.

ZONE3®, Metrology Software, is a completely new way to work with multisensor measurement systems. It provides faster, easier and more productive measurements. Its interface displays relationships between parts and sensors, datum alignments and machine accessories. True sensor independence with multisensor capabilities, including OGP’s most advanced sensor options. No need to specify the primary sensor. Intelligent routine optimization ensures that steps are run as efficiently and effectively as possible by reducing the number of machine movements while simultaneously measuring features. Auto path generation can be generated using CAD or user-entered nouns.

VMS™, a 2 1/2D metrology software with powerful parametric programming, and built-in scripting to create custom routines and interfaces. VMS has extensive capabilities, allowing it to handle difficult lighting conditions, edges with weak points, and part-topart variability. Area Multi-Focus creates high-resolution data sets from a normal autofocus, providing a high-throughput alternative to laser scanning. Continuous Image Capture (CIC), which synchronizes illumination, camera frame acquisition, and stage movement in order to capture video images even when XY stages move. Native video®, processing capability, allows for saved images to be analyzed using the same tools as live images.

Scan-X®, a powerful yet easy-to use surface profiling software, allows users to visualize surfaces and take measurements. Scan-X analyzes the laser scan data and produces a high resolution, two-dimensional or three-dimensional raster. Scan-X can be used offline to evaluate laser scan data imported from external sources such as a video measurement system. Scan-X comes with adjustable cursors to make quick and easy measurements. Users can archive measurements and use playback mode to perform automatic inspections. OGP authorized representatives have a strong metrology background and are qualified to evaluate your measurements requirements and recommend a solution that meets your needs. Your local representative can assist you with product information, demonstrations, and training.

Renishaw's MODUS provides a powerful platform to measure 5-axis. A configurable interface allows native DMIS to be developed off-line, drawing geometry, embedded measurements, and tolerance data directly from CAD. Full simulation is also possible. The software contains algorithms that are certified for feature measurement, feature creation, and part alignment. The software allows offline creation of programs directly from CAD, with on-screen probe paths verification. The CMM environment, fixture, and location of the part can be defined to enable full simulation of 5-axis measurements programs. This reduces CMM downtime, as the programs are ready to run when they arrive at the machine. MODUS has a wide range of reporting capabilities, including CMM text reports that can be formatted in any way you like. Graphical reporting allows results to be displayed on the CAD model. This includes whisker charts or 3-D form plotting.

Elements®, a 2D CAD-based software for metrology, is ideal for measuring parts that have a high feature density. It can create measurement routines from 2D CAD data with ease. It then optimizes measurement paths automatically to ensure that data is collected as quickly as possible. Elements' advantage is its ability to handle large numbers of discrete features efficiently and quickly. CAD formats that can be imported include DXF and Gerber as well as CSV locations lists. The advanced review mode allows users to inspect specific features in real-time after a run is completed. The coarse alignment feature allows for the positioning of finders in real-time to be updated for more accurate measurements. The built-in analysis tools make it easy to analyze large data trends. These tools include scatter plots and histograms for dimensional values as well as whisker plots that show deviations from nominal. Evaluate your measurements and recommend the best solution for your needs.

MiCATPlanner allows for more flexible measurements by adhering to customizable measuring rules. These can be set up as needed. Operators can set the number of measurement points, their distribution and speed for touch trigger or scanning probes based on feature type, size and other criteria. Several rules can be applied simultaneously, depending on the manufacturing or customer needs. CMM part programs can be created in a fraction of the time. Reduce labor costs for parts programming. Reduce the risk of costly and damaging probe collisions. A virtual pre-run program will ensure maximum efficiency. Select which characteristics, features and measurement point sets you want to include or exclude in the measurement plan. Apply individual or global measurement strategies automatically for all part programs, or specific programs. Explain features that cannot be measured, such as missing GD&T or probe angle not defined.