Alternatives to Cyber Triage

We are the #1 incident response provider in the world. We protect, detect, and respond to cyberattacks by combining complete response capabilities and frontline threat information from over 3000 incidents per year with end-to-end expertise. Contact us immediately via our 24-hour cyber incident hotlines. Kroll's Cyber Risk specialists can help you tackle the threats of today and tomorrow. Kroll's protection solutions, detection and response are enriched with frontline threat intelligence from 3000+ incident cases each year. It is important to take proactive measures to protect your organization, as the attack surface is constantly increasing in scope and complexity. Enter Kroll's Threat Lifecycle Management. Our end-to-end solutions for cyber risk help uncover vulnerabilities, validate the effectiveness your defenses, update controls, fine-tune detectors and confidently respond any threat.

Acronis Cyber Protect gives you the peace of mind to know your business is covered, with zero-day malware and ransomware protection, backup and forensic investigations. Cyberthreats are evolving at an incredible rate — and simple data backup and cybersecurity tools are no longer enough to contain them. Acronis’ all-in-one cyber protection solutions combine cybersecurity, data backup, disaster recovery, and more to ensure the integrity of the data and systems you rely on. If you’re like other businesses, you probably use a complex patchwork of solutions to defend against data loss and other cyberthreats — but this approach is tough to manage and leads to security gaps. Acronis’ integrated cyber protection solutions safeguard entire workloads with greater efficiency and a fraction of the complexity, freeing up resources and enabling you to focus on protection and enablement rather than juggling tools. Protect entire workloads without the friction. Getting started with Acronis' cyber protection solutions is simple and painless. Provision multiple systems with just a click, and manage everything — from backup policies to vulnerability assessments and patching — through a single pane of glass.

ANY.RUN is a cloud-based interactive sandbox designed to support DFIR and SOC teams in investigating cybersecurity threats. With support for Windows, Linux, and Android environments, it allows users to analyze malware behavior in real time. Trusted by more than 500,000 professionals, ANY.RUN enables teams to detect threats faster, handle more alerts, and collaborate effectively during malware investigations. Visit the official ANY.RUN website to explore more.

Magnet Forensics' solutions are used by large and small enterprises to quickly close cases. They use powerful analytics to surface intelligence and insights. They can also leverage automation and the cloud to reduce downtime, and enable remote collaboration at scale. Magnet Forensics is used by some of the largest corporations in the world to investigate IP theft, fraud and employee misconduct.

Rapidly examine all escalated alerts with unmatched thoroughness and efficiency, transforming the approach of Security Operations and Incident Response teams towards the investigation of cyber threats. In our increasingly intricate and dynamic hybrid environment, it is essential to have a reliable investigation platform that consistently provides crucial insights. Cado Security equips teams with exceptional data acquisition capabilities, a wealth of contextual information, and remarkable speed. The Cado Platform streamlines the process by delivering automated, comprehensive data, which eliminates the need for teams to rush around in search of essential information, thereby facilitating quicker resolutions and enhancing collaborative efforts. Given the transient nature of certain data, prompt action is critical, and the Cado Platform stands out as the only solution that offers automated full forensic captures alongside immediate triage collection techniques, seamlessly acquiring data from cloud-based resources such as containers, SaaS applications, and on-premise endpoints. This enables teams to stay ahead in the face of ever-evolving cybersecurity challenges.

Binalyze AIR stands out as a premier platform for Digital Forensics and Incident Response, empowering enterprise and MSSP security operations teams to swiftly gather comprehensive forensic evidence on a large scale. With features like triage, timeline analysis, and remote shell access, our incident response tools significantly accelerate the resolution of DFIR investigations, enabling teams to wrap up inquiries in unprecedented time frames. This efficiency not only enhances the effectiveness of security operations but also minimizes the potential impact of incidents on organizations.

Belkasoft Triage is an innovative tool for digital forensics and incident response, tailored for the rapid assessment of live computers while enabling the capture of essential data. This tool is particularly beneficial for investigators and first responders at the scene of an incident, allowing them to swiftly pinpoint and retrieve crucial digital evidence from Windows systems. In high-pressure scenarios where time is of the essence, this product proves invaluable by facilitating the immediate discovery of relevant information, thus providing critical investigative leads without the need for a comprehensive examination of all available digital evidence. Ultimately, Belkasoft Triage streamlines the process of evidence collection, ensuring that vital information is not overlooked in urgent situations.

Falcon Forensics delivers an all-encompassing solution for data collection and triage analysis during investigative processes. The field of forensic security typically involves extensive searches utilizing a variety of tools. By consolidating your collection and analysis into a single solution, you can accelerate the triage process. This enables incident responders to act more swiftly during investigations while facilitating compromise assessments, threat hunting, and monitoring efforts with Falcon Forensics. With pre-built dashboards and user-friendly search and viewing capabilities, analysts can rapidly sift through extensive datasets, including historical records. Falcon Forensics streamlines the data collection process and offers in-depth insights regarding incidents. Responders can access comprehensive threat context without the need for protracted queries or complete disk image collections. This solution empowers incident responders to efficiently analyze large volumes of data, both in a historical context and in real-time, allowing them to uncover critical information essential for effective incident triage. Ultimately, Falcon Forensics enhances the overall investigation workflow, leading to quicker and more informed decision-making.

CyFIR offers advanced digital security and forensic analysis tools that deliver exceptional visibility at endpoints, enhanced scalability, and rapid resolution times. Organizations with strong cyber resilience experience minimal to no impact when faced with security breaches. The cyber risk solutions provided by CyFIR enable the identification, examination, and mitigation of current or potential threats at a pace 31 times quicker than conventional EDR systems. In today's landscape, where data breaches are increasingly common and more damaging, the need for robust security is paramount. The attack surface for these threats now stretches far beyond an organization's premises, incorporating countless interconnected devices and endpoints scattered across remote sites, cloud environments, SaaS platforms, and various other locations, necessitating comprehensive security measures.

Rapid7 Incident Command is a cloud-native, AI-powered SIEM built to replace legacy security monitoring tools. It unifies attack surface visibility, telemetry, and risk context to give security teams a clear, real-time understanding of threats. Incident Command applies advanced behavioral analytics and AI-driven triage to reduce false positives and prioritize critical incidents. The platform enriches alerts with vulnerability data, exposure scoring, and threat intelligence so analysts know exactly what to address first. Natural language search enables rapid investigation across massive volumes of security data. Incident Command correlates activity across users, endpoints, applications, and networks to reveal full attack paths. Automated SOAR workflows allow teams to isolate systems, revoke credentials, and contain threats quickly. Integrated digital forensics and incident response capabilities support deeper investigations. The platform is designed to scale across complex hybrid environments. Rapid7 Incident Command helps SOC teams detect faster, respond smarter, and operate more efficiently.

Blackpanda Digital Forensics offers specialized services in Incident Response, assisting organizations in recognizing, prioritizing, containing, and resolving security threats during a breach, thereby reducing potential harm and enhancing future response capabilities. Our team of incident response specialists collaborates with your organization to pinpoint at-risk assets, develop tailored response strategies, and create customized playbooks for frequent attack scenarios and communication protocols, while rigorously testing all procedures to ensure an efficient response. This proactive approach is designed to lessen the impact of incidents even before they occur, reinforcing your overall security posture. Recognizing that digital activities leave behind traces, our skilled digital forensics investigators meticulously gather, examine, and safeguard digital evidence to reconstruct incident narratives, retrieve lost or stolen information, and provide testimony to relevant parties, including law enforcement, as needed. Furthermore, our forensic cyber security services play a crucial role in various legal, corporate, and private matters, underscoring the importance of a comprehensive approach to digital security. By engaging with Blackpanda, organizations not only bolster their immediate defenses but also lay the groundwork for a more resilient future.

With just a few button presses, you can efficiently gather targeted digital forensic evidence from multiple endpoints simultaneously, ensuring both speed and accuracy. The system continuously captures endpoint activities, including event logs, changes to files, and the execution of processes. Additionally, it allows for the indefinite central storage of these events, enabling extensive historical review and analysis. Users can actively probe for suspicious behaviors by utilizing a comprehensive library of forensic artifacts, which can be tailored to meet specific threat-hunting requirements. This solution was crafted by experts in Digital Forensic and Incident Response (DFIR) who sought a robust and effective method for tracking specific artifacts while overseeing activities across numerous endpoints. Velociraptor empowers you to enhance your response capabilities for a variety of digital forensic and cyber incident response investigations, including cases of data breaches. Furthermore, its user-friendly interface and advanced features make it an essential tool for organizations aiming to strengthen their cybersecurity posture.

Belkasoft Remote Acquisition (Belkasoft R) is an innovative tool tailored for digital forensics and incident response, designed to facilitate the remote extraction of data from hard drives, removable storage, RAM, and connected mobile devices. This tool proves invaluable for incident response analysts and digital forensic investigators who require prompt evidence collection from devices located in various geographic areas. With Belkasoft R, it is possible to conduct investigations without disrupting employees' regular activities or attracting unnecessary attention to the case at hand. Additionally, it streamlines the process of forensically sound remote acquisitions, eliminating the burdens of travel-related expenses and logistical challenges. As a result, organizations can save both time and financial resources, as there is no longer a necessity for trained specialists to be present at every office location. Ultimately, Belkasoft R enhances the efficiency and effectiveness of digital investigations.

Wazuh is an open-source, enterprise-capable solution designed for security monitoring that effectively addresses threat detection, integrity monitoring, incident response, and compliance needs. By collecting, aggregating, indexing, and analyzing security data, Wazuh aids organizations in identifying intrusions, potential threats, and unusual behaviors. As cyber threats evolve in complexity, the demand for real-time monitoring and robust security analysis becomes increasingly critical for the swift detection and resolution of these threats. Our lightweight agent is equipped with essential monitoring and response functionalities, complemented by a server component that delivers security intelligence and performs comprehensive data analysis. Wazuh effectively meets the demand for ongoing monitoring and proactive responses to sophisticated threats, ensuring that security professionals have the necessary tools at their disposal. The platform emphasizes providing optimal visibility, offering valuable insights that empower security analysts to uncover, investigate, and address threats and attack strategies across a diverse range of endpoints. By integrating these features, Wazuh enhances an organization’s overall security posture.

The ProDiscover forensics suite caters to various cybercrime situations faced by law enforcement agencies and corporate security teams. It has established itself as a key player in the realms of Computer Forensics and Incident Response. This suite includes tools for diagnostics and evidence gathering, making it invaluable for corporate policy compliance checks and electronic discovery processes. ProDiscover is adept at swiftly identifying relevant files and data, aided by intuitive wizards, dashboards, and timeline features that enhance the speed of information retrieval. Investigators benefit from a comprehensive assortment of tools and integrated viewers, enabling them to sift through evidence disks and extract pertinent artifacts with ease. Combining rapid processing with accuracy and user-friendliness, ProDiscover is also offered at a competitive price point. Since its inception in 2001, ProDiscover has developed an impressive legacy, having been one of the pioneering products to offer remote forensic functionality. Its ongoing evolution continues to make it a vital resource in the ever-changing landscape of digital forensics.

OpenText™ Security Suite, utilizing OpenText™ EnCase™, offers comprehensive visibility across various devices including laptops, desktops, and servers, enabling the proactive detection of sensitive information, threat identification, remediation, and meticulous, forensically-sound data collection and analysis. With over 40 million endpoints equipped with its agents, it serves notable clients, including 78 companies from the Fortune 100 list, alongside a community of more than 6,600 EnCE™ certified professionals, thereby establishing itself as the benchmark for incident response and digital investigations in the industry. EnCase solutions address a multitude of requirements for enterprises, government bodies, and law enforcement agencies, covering aspects such as risk management, compliance, file analytics, endpoint detection and response (EDR), and digital forensics with the most reliable cybersecurity software available. By tackling issues that frequently remain unnoticed or unresolved at the endpoint level, Security Suite not only enhances the security posture of organizations but also reinstates trust among their clients, thanks to its unmatched dependability and extensive coverage. This suite ultimately empowers organizations to navigate the complex landscape of cybersecurity with confidence and efficiency.

Security teams encounter numerous hurdles while addressing threats aimed at their personnel, including limited staffing, a high volume of alerts, and the need to expedite response and remediation efforts. These obstacles can significantly hinder their effectiveness in safeguarding the organization. Proofpoint Threat Response stands out as a top-tier security orchestration, automation, and response (SOAR) solution that empowers teams to react more promptly and effectively to the constantly evolving threat landscape. The platform coordinates several crucial stages of the incident response process, allowing for the ingestion of alerts from a variety of sources. It can swiftly enrich and consolidate these alerts into coherent incidents within seconds. Moreover, security teams gain valuable insights by utilizing Proofpoint Threat Intelligence alongside third-party threat intelligence sources, enhancing their understanding of the "who, what, and where" of attacks, which aids in prioritizing and swiftly triaging incoming events. As a result, organizations can bolster their defenses and improve their overall cybersecurity posture.

Omnis CyberStream and Omnis Cyber Intelligence together deliver a scalable NDR solution designed for deep network visibility and effective threat investigation. Powered by always-on deep packet inspection, the platform captures critical evidence that traditional tools often miss. It provides unified visibility across east-west traffic, north-south traffic, cloud workloads, and remote users. Adaptive Threat Detection identifies malicious activity in real time directly at the packet source. High-fidelity alerts are prioritized to reduce noise and speed analyst response. Adaptive Threat Analytics continuously stores packet and metadata independent of alerts, enabling thorough forensic investigations. Security teams gain immediate insight into attack timelines and behaviors. The platform supports proactive threat hunting beyond reactive alert handling. Integrated workflows simplify investigation and response processes. Omnis Cyber Intelligence helps organizations move faster from detection to resolution with fewer tools and less complexity.

OpenText Core EDR serves as a comprehensive solution for endpoint detection and response, merging endpoint protection, security information and event management (SIEM), security orchestration, automation, and response (SOAR), alert triage, and vulnerability assessment into a singular platform, thereby removing the necessity of juggling multiple security tools. Its lightweight agent, equipped with pre-configured policies, allows for swift deployment within minutes and simplifies management across various devices without the need for intricate scripting. By effectively correlating events from endpoints, networks, and identities in real time, the integrated SIEM and SOAR playbooks highlight suspicious activities and automatically direct actions for containment, remediation, and investigation. The system is fortified with continuous, global threat intelligence that facilitates real-time monitoring, which is crucial for detecting malware, ransomware, zero-day vulnerabilities, and other sophisticated threats before they can proliferate, allowing for the prompt isolation or remediation of affected endpoints. This capability not only enhances security but also empowers organizations to respond proactively to emerging threats and maintain a resilient cybersecurity posture.

Leading the market, QRadar SIEM is designed to surpass adversaries through enhanced speed, scalability, and precision. As digital threats escalate and cyber attackers become more advanced, the importance of SOC analysts has reached unprecedented heights. QRadar SIEM empowers security teams to tackle current threats proactively by leveraging sophisticated AI, robust threat intelligence, and access to state-of-the-art resources, maximizing the potential of analysts. Whether you require a cloud-native solution tailored for hybrid environments, or a system that complements your existing on-premises setup, IBM offers a SIEM solution that can cater to your specific needs. Furthermore, harness the capabilities of IBM's enterprise-grade AI, which is crafted to improve the efficiency and knowledge of each security team member. By utilizing QRadar SIEM, analysts can minimize time-consuming manual tasks such as case management and risk assessment, allowing them to concentrate on essential investigations and remediation efforts while enhancing overall security posture.

Bricklayer AI represents a cutting-edge autonomous security team designed to elevate Security Operations Centers (SOCs) by efficiently handling alerts from endpoints, cloud environments, and SIEM systems. Its innovative multi-agent framework replicates the workflows of human teams, which facilitates seamless collaboration between AI analysts, incident responders, and human specialists. Among its standout features are automated triage of alerts, prompt incident responses, and comprehensive threat intelligence analysis, all operable via natural language commands. The platform integrates smoothly with pre-existing tools and processes, enabling organizations to create tailored API integrations that can pull data from their entire technological ecosystem. By utilizing Bricklayer AI, organizations can lower their monitoring expenses, enhance the speed of threat detection and response, and expand operations without requiring additional personnel. Moreover, its focus on action-oriented tasking guarantees that each alert is thoroughly investigated, feedback is effectively communicated, and responses are provided in real time, ultimately fostering a more proactive security posture. This ensures that organizations remain vigilant against emerging threats while streamlining their security operations.

Intezer AI SOC combines multiple AI models, both proprietary and commercial, with deterministic, forensic methods such as endpoint analysis, reverse engineering, network artifact forensics, sandboxing, static analysis and more. Together, this approach mirrors the triage process that expert, human analysts follow, maintaining high accuracy at unmatched speed and scale. Our native integrations are built for the depth and rigor of the triage and forensic investigation process, providing robust, full-featured connections between tools. This allows Intezer to ingest alerts from all major sources within seconds, gather richer evidence, and deliver deeper context in every analysis. Remediation actions can be easily automated with explicit human approval. You get: - Accurate, fast triage, available 24/7/365: Regardless of alert volume, Intezer delivers consistent, objective triage free from human error or subjective judgment. - Forensics built-in: Intezer AI SOC incorporates advanced forensic capabilities, from automated evidence collection via EDR/SIEM/IDP to memory analysis, reverse engineering, network artifact forensics, and sandboxing. - Humans in the loop: Intezer maintains true human-in-the-loop oversight with transparent triage logic, clear explanations, and the ability for analysts to review or override escalated alerts. - Scalable with predictable pricing: By combining deterministic analysis with efficient AI models, most alerts are triaged without requiring resource-intensive, expensive LLM processing.

Cyber attackers are cunning, persistent, and driven, often employing the same tools as their targets. They can conceal themselves within your infrastructure and swiftly broaden their access. Our deep understanding of the cyber landscape stems from our direct engagement with it, informing our operations. The distinctive strength of our MXDR solution comes from this background, combined with tested methodologies, reliable intellectual property, superior technology, and a commitment to leveraging automation while employing highly skilled professionals to oversee everything. Together, we can create a tailored solution that offers extensive threat visibility and facilitates rapid identification, investigation, triage, and response to mitigate risks against your organization. We will utilize your current investments in endpoint, network, cloud, email, and OT/IoT solutions, uniting them for effective technology orchestration. This approach minimizes your attack surface, enhances threat detection speed, and promotes thorough investigations through a continuous strategy, ensuring robust protection against various cyber threats. Ultimately, our collaborative efforts will not only strengthen your defenses but also foster a proactive security culture within your enterprise.

ADF Solutions is the leader in digital forensics and media exploitation tools. These tools can be used to analyze Android/iOS smartphones, mobile devices and computers, as well as external drives, drive images and other media storage (USB flash sticks, memory cards, etc.). ADF triage software is about speed, scalability and ease-of-use. It also provides relevant results. These tools have a proven track-record in reducing forensic backlogs, streamlining investigations, and rapid access to intelligence and digital evidence. Our customers include federal, local, and state law enforcement agencies, military, defense agencies, Office of Inspector General office, Attorneys General, and other investigative professionals around the world.

AI-driven virtual analysts can automate a staggering 80-90% of repetitive tasks, resulting in quicker, superior, and more cost-effective alert triage, investigation, and response, all while being supported by human specialists. Avoid the pitfalls of expensive, sluggish, and inconsistent investigations and embrace the future of precise investigations delivered at remarkable speed. While traditional MDRs depend heavily on human analysts for case triage, AirMDR's advanced virtual analyst is capable of processing these cases 20 times faster, with enhanced consistency and depth. Consequently, human analysts at AirMDR are tasked with manually triaging significantly fewer cases—over 90% less—allowing them to focus on more complex challenges. Enjoy high-caliber investigation, triage, and response for every alert, with 90% being scrutinized in less than five minutes. Each alert is enriched, investigated, and triaged automatically by our virtual analyst, acting as the initial responder to incidents. This efficient process is consistently monitored and refined by our dedicated team of human security professionals, guaranteeing a smooth and effective security operation. With this innovative approach, organizations can enhance their overall security posture while minimizing response times and maximizing resource allocation.

Cyble is an AI-native, intelligence-driven cybersecurity platform designed to provide cutting-edge protection against complex and rapidly evolving cyber threats. Its third-generation Agentic AI leverages autonomous agents to orchestrate real-time defense, including incident detection, automated response, and threat takedowns. The platform’s offerings span attack surface management, vulnerability scanning, brand intelligence, dark web monitoring, and third-party risk management. Cyble is trusted by governments, enterprises, and security teams globally, earning a reputation for innovation and reliability. The solution’s predictive capabilities enable organizations to anticipate cyber risks up to six months in advance, allowing proactive risk mitigation. Extensive integrations with SOC and threat intelligence tools help unify security operations. Cyble also provides timely threat intelligence updates, research blogs, and vulnerability landscape reports through its Cyble Research and Intelligence Labs (CRIL). With scalable AI-powered defense, Cyble empowers security teams to automate operations and maintain continuous threat visibility.

Proofpoint's Data Loss Prevention solution empowers organizations to mitigate the risks associated with the exposure of sensitive data across various channels such as email, cloud services, and endpoints, utilizing a cohesive, cloud-based framework focused on user-centric security. It integrates sophisticated content detection methods, which include AI-driven classifiers and optical character recognition, along with user-behavior analytics and threat telemetry to pinpoint negligent, compromised, or malicious users while interpreting the intent behind alerts. The platform offers a unified dashboard that facilitates triage, investigation, and response across multiple channels, enhances alert workflows, employs a lightweight endpoint agent, and supports dynamic policy enforcement, data lineage tracking, and the rectification of excessive privileges. This robust solution allows for the identification of sensitive file alterations, uploads to unauthorized platforms, the misuse of generative AI tools, data exfiltration attempts, and unusual user behaviors, all while maintaining the ability to scale efficiently according to organizational needs. In addition, it provides organizations with comprehensive insights to strengthen their data protection strategies.

Cydarm serves as a comprehensive platform for managing cybersecurity incident responses, specifically tailored to enhance the coordination and handling of cyber incidents by security operations teams throughout an organization. It encompasses the entire incident response lifecycle, empowering teams to efficiently detect, analyze, investigate, respond to, and document cybersecurity occurrences within a cohesive framework. This platform acts as a secure case management tool, allowing for the aggregation, examination, and tracking of alerts from various security tools, thereby offering heightened visibility into potential threats across the network. Additionally, Cydarm seamlessly integrates with pre-existing security infrastructures, including SIEM systems, messaging applications, authentication mechanisms, and IT service management tools, which facilitates the automatic creation of alerts and cases while fostering collaboration among teams utilizing their current operational resources. Moreover, by centralizing incident management, Cydarm enables organizations to respond more promptly and effectively to evolving cyber threats.

SmartEvent's event management system offers comprehensive visibility into threats, allowing users to see security risks from a unified perspective. With capabilities for real-time forensic analysis and event investigation, it enables effective compliance monitoring and reporting. Swiftly address security incidents and acquire genuine insights into your network's status. SmartEvent simplifies understanding security trends and facilitates immediate responses to potential threats. The platform ensures that you remain current with the latest in security management, automatically updating as needed. Additionally, it allows for on-demand expansion, making it easy to integrate more gateways without hassle. With zero maintenance requirements, your environments will be more secure, manageable, and compliant, ultimately enhancing your overall security posture. This robust solution empowers organizations to stay proactive in their threat management efforts.

Let’s be honest: achieving flawless security is impossible. Data breaches can occur due to hackers, system malfunctions, or human errors, and nearly every organization will face such an incident at some point. When a cyber event occurs, it is crucial for your clients to receive prompt assistance and skilled guidance for effective recovery. Due to the intricate nature of these situations, a comprehensive response is essential, drawing on expertise from fields like legal and regulatory compliance, information technology security, privacy, disaster recovery/business continuity, computer forensics, law enforcement, public relations, and more. By utilizing the eRiskHub® portal, powered by NetDiligence®, you offer your clients a valuable resource for navigating the cyber landscape, empowering them to strengthen their defenses and respond adeptly to data breaches, network intrusions, and various cyber threats. We have a variety of options available for you to explore! Check out our offerings to the right for more details.

Introducing the ultimate Cybersecurity platform that meets all your needs. This cloud-native, seamless, and unified solution caters to businesses of every size and scale. With proactive measures in place, you can thwart cyberattacks before they even occur. Our innovative approach is designed to disrupt the cybersecurity landscape by offering a comprehensive advanced threat detection, response, and remediation platform that operates entirely agentless. BluSapphire's solutions are crafted with a singular focus: to guarantee that you never have to endure another cyberattack or its repercussions. Utilizing the power of Machine Learning and advanced analytics, we identify malicious activities well ahead of time, while our Artificial Intelligence capabilities streamline attack triage across various data layers. By enhancing your organization’s cyber posture, we ensure that all compliance inquiries are addressed effectively. Elevate your security strategy beyond traditional XDR with a singular Cybersecurity solution that manages the entire incident lifecycle for diverse organizations. Experience accelerated cyber threat detection and response capabilities through our state-of-the-art XDR solution, ultimately safeguarding your business against future threats. Empower your organization with the tools needed to navigate the complex cybersecurity landscape confidently.

7AI is a cutting-edge security platform designed to streamline and enhance the entire security operations lifecycle by utilizing advanced AI agents that swiftly investigate security alerts, derive conclusions, and execute actions, transforming processes that previously consumed hours into mere minutes. In contrast to conventional automation tools or AI assistants, 7AI features specialized, context-aware agents that are carefully structured to prevent inaccuracies and function independently; these agents assimilate alerts from various security systems, enrich and correlate information across endpoints, cloud, identity, email, network, and other sources, ultimately delivering comprehensive investigations complete with evidence, narrative summaries, cross-alert correlations, and audit trails. This platform provides an all-encompassing security solution that ranges from detection to alert triage, effectively filtering out noise and eliminating up to 95–99% of false positives, as well as facilitating investigations through extensive data collection and expert reasoning. Furthermore, it supports unified incident-case management by auto-generating cases, enabling team collaboration, and ensuring smooth handoffs, thus enhancing the overall efficiency of security operations. With its innovative approach, 7AI not only optimizes security processes but also empowers organizations to respond to threats more effectively and efficiently.

Enhance your cognitive capabilities by analyzing group data to forecast actionable results. At Technisanct, we are dedicated to providing a comprehensive suite of services aimed at ensuring proactive oversight of security frameworks and all related components. As a pioneering Cyber Security startup, we present a diverse array of offerings, ranging from penetration testing to legal support. Our proficient team of Cyber Security experts is adept at recognizing potential threats that may impact organizations. This team conducts thorough audits on various platforms, including servers, computers, networks, and hosted applications. We are equipped to address any risks that may arise in the cyber realm, employing both manual threat-hunting techniques and automated strategies. Forensic investigation serves as the crucial initial phase that grants insight into any cyber incidents that may have occurred. We utilize the most advanced FTK methodologies to fulfill a wide range of forensic requirements, ensuring our clients receive the best possible support in their security needs. By continually updating our methods and practices, we strive to stay ahead of emerging threats in the ever-evolving landscape of cyber security.

ACSIA serves as a security solution designed for a 'post-perimeter' approach, enhancing traditional perimeter defenses by operating at the Application or Data layer. This innovative tool keeps a vigilant eye on various platforms—including physical, virtual machines, cloud, and container environments—where sensitive data is ultimately found, as these are prime targets for attackers. While many organizations employ perimeter defenses to fend off cyber threats by blocking known indicators of compromise, adversaries often engage in activities beyond the enterprise's line of sight, making such threats challenging to identify. ACSIA aims to thwart cyber threats before they escalate into full-blown attacks by utilizing a hybrid model that combines Security Incident and Event Management (SIEM), Intrusion Detection Systems (IDS), Intrusion Prevention Systems (IPS), firewalls, and additional security measures. It is specifically designed for Linux environments but also extends its monitoring capabilities to Windows servers, providing robust kernel-level surveillance and internal threat detection to safeguard critical assets effectively. This comprehensive approach ensures that organizations can maintain a proactive stance against evolving cyber threats.

Cofense Triage™ enhances the speed at which phishing emails are recognized and dealt with effectively. By leveraging integration and automation, you can significantly reduce your response time. Utilizing Cofense Intelligence™ rules alongside a top-tier spam engine, we automatically detect and assess threats with precision. Our comprehensive read/write API enables you to incorporate intelligent phishing defense seamlessly into your existing workflow, allowing your team to concentrate on safeguarding your organization. We recognize that combating phishing can be complex; therefore, Cofense Triage™ provides immediate access to expert assistance with just a single click, available at any moment. Our Threat Intelligence and Research Teams are dedicated to continuously expanding our collection of YARA rules, facilitating the identification of new campaigns and enhancing your response efficiency. Furthermore, the Cofense Triage Community Exchange empowers you to collaboratively analyze phishing emails and gather threat intelligence, ensuring you're well-supported in your efforts to combat these threats. This collaborative approach not only strengthens your defenses but also fosters a community of shared knowledge and experience.

Link indicators from your network to almost all active IP addresses and domains across the Internet. Discover how this information can enhance risk evaluations, assist in identifying attackers, support online fraud probes, and trace cyber activities back to their infrastructure. Acquire crucial insights that empower you to accurately assess the threat levels faced by your organization. DomainTools Iris offers a unique threat intelligence and investigative platform, merging high-quality domain and DNS intelligence with a user-friendly web interface, ensuring ease of use for professionals. This powerful tool is essential for organizations aiming to bolster their cybersecurity measures effectively.

ESET Inspect is a sophisticated endpoint detection and response (EDR) solution developed by ESET to deliver extensive visibility, threat identification, and incident management functionalities for enterprises. This tool is instrumental for organizations in recognizing, examining, and alleviating advanced cyber threats that may evade conventional security protocols. By continuously monitoring endpoint activities in real time, ESET Inspect leverages behavioral analytics, machine learning, and threat intelligence to uncover suspicious activities, irregularities, and possible security compromises. It integrates effortlessly with ESET’s endpoint protection suite, presenting a cohesive overview of network security and enabling security teams to react swiftly to threats through either automated responses or manual interventions. Key features such as threat hunting, comprehensive reporting, and tailored alerts empower organizations to bolster their cybersecurity measures while proactively tackling potential vulnerabilities. Furthermore, the adaptability of ESET Inspect allows it to meet the unique security needs of diverse businesses, ensuring that they remain resilient against evolving cyber threats.

ShieldForce.io is an all-encompassing cybersecurity platform powered by artificial intelligence, designed to help organizations identify, thwart, and address cyber threats in real-time. This platform enhances the overall security framework by utilizing machine learning and behavioral analytics to detect malicious activities and irregularities across various environments such as networks, endpoints, and the cloud. It provides sophisticated threat detection, automated responses, and ongoing monitoring, equipping businesses with essential tools to combat the ever-evolving landscape of cyber threats. With its intelligent alert system and comprehensive incident reports, ShieldForce empowers security teams with actionable insights that allow for prompt risk mitigation and prevention of data breaches. The platform’s intuitive dashboard merges threat intelligence and system health information into one accessible hub, simplifying the tracking and management of security incidents. Furthermore, ShieldForce is designed to integrate effortlessly with existing security infrastructures, including SIEM and SOAR solutions, ensuring a cohesive cybersecurity strategy. This seamless integration not only enhances operational efficiency but also strengthens the overall defense mechanism against cyber threats.

Autopsy® stands out as the leading comprehensive open-source digital forensics platform, developed by Basis Technology to incorporate essential features commonly found in commercial forensic applications. This solution offers a rapid, meticulous, and effective means of investigating hard drives, adapting seamlessly to your evolving needs. Utilized by tens of thousands of law enforcement and corporate cyber investigators globally, Autopsy serves as a digital forensics platform and offers a user-friendly interface to The Sleuth Kit® along with various other digital forensic tools. It caters to law enforcement, military personnel, and corporate examiners who need to uncover the events that transpired on a computer system. Additionally, it can assist in recovering images from the memory cards of cameras, showcasing its versatility. In today's fast-paced environment, where quick results are paramount, Autopsy efficiently executes background tasks in parallel across multiple cores, delivering findings as they become available. While a complete drive search may take several hours, users receive immediate notifications if their specified keywords are detected within the user's home directory, ensuring a balance of thoroughness and expediency. For further insights, you can explore the fast results page, highlighting the effectiveness of Autopsy.

Security Onion serves as a robust open-source platform dedicated to intrusion detection, network security monitoring, and log management. Equipped with a suite of effective tools, it empowers security experts to identify and address potential threats within an organization's network. By integrating various technologies such as Suricata, Zeek, and the Elastic Stack, Security Onion enables the collection, analysis, and real-time visualization of security data. Its user-friendly interface simplifies the management and examination of network traffic, security alerts, and system logs. Additionally, it features integrated tools for threat hunting, alert triage, and forensic analysis, which aid users in swiftly recognizing possible security incidents. Tailored for scalability, Security Onion is effective for a diverse range of environments, accommodating both small businesses and large enterprises alike. With its ongoing updates and community support, users can continuously enhance their security posture and adapt to evolving threats.

Recovering from a cyber breach can be both costly and labor-intensive, which is why our committed team of specialists is by your side at every stage of the recovery process. We provide a diverse array of resources through our panel of experts, ensuring that you receive the necessary support during challenging times, including services for breach response, incident management, legal assistance, forensic investigations, credit monitoring, call center operations, loss control, public relations, and much more. Additionally, our collaboration with NetDiligence allows Cyber 360 policyholders complimentary access to the QuietAudit tool, enabling you to evaluate your security measures and defenses proactively to lessen the impact of major cyber threats. Moreover, Cyber 360 policyholders can utilize the NetDiligence® eRiskHub®, an online platform designed for cyber risk management, which offers a wealth of tools and information to bolster your business’s defenses. The eRiskHub portal is equipped with valuable resources aimed at addressing the most prevalent cyber risks, ensuring you stay one step ahead in a constantly evolving digital landscape. With these comprehensive resources at your disposal, you can navigate the complexities of cyber threats more effectively.

Our XDR (Extended Detection & Response) cyber security platform provides deep visibility into your endpoints, servers, clouds, and digital supply chains and allows for threat detection. The platform is delivered to you as a fully managed service, supported by our 24x7 security operations. This allows for the quickest enrollment time and low cost. Our platform is the foundation for effective cyber threat detection, response services, and prevention. The platform provides deep visibility, advanced threat detection, sophisticated behavioral analytics, and automated threat hunting. It adds efficiency to your security operations capabilities. Our platform uses AI-empowered machine intelligence to detect suspicious and unusual behavior, revealing even the most obscure threats. The platform detects real threats with high fidelity and helps investigators and SOC analysts to focus on the important things.

A proactive strategy is essential for robust defense against cyber threats, as it strengthens security measures and offers improved protection against advanced attackers. In the current fast-paced threat environment, defensive cybersecurity solutions are vital for the protection of businesses. Utilizing state-of-the-art technology, sophisticated analytical methods, and skilled investigators, digital forensics and incident response serve as key elements in organizational defense. Moreover, a solid governance, risk, and compliance framework is fundamental for organizations to navigate and minimize risks while maintaining regulatory adherence. Ultimately, integrating these elements creates a comprehensive defense that can adapt to new and emerging threats.

CyberDefenders serves as a training platform focused on enhancing the skills of SOC analysts, threat hunters, security blue teams, and DFIR professionals in cyber defense. It features two in-depth learning trajectories: the Certified CyberDefenders (CCD) course aimed at preparing individuals for performance-based certification and BlueYard’s engaging CyberRange labs that provide practical, hands-on experience. Users have access to a collection of realistic, browser-based blue team labs and exercises that require no installation or external setup, which are regularly updated to align with the most recent CVEs and attack reports. Each training module combines practical exercises with clear, step-by-step instructions, effectively linking theoretical knowledge with real-world application, thereby enabling participants to effectively manage threat detection, incident response, and forensic analysis activities. The performance-oriented tasks simulate authentic scenarios, empowering learners to excel in areas such as threat hunting, log analysis, malware investigation, and operations within a Security Operations Center (SOC). Additionally, this comprehensive approach fosters continuous improvement and adaptability in the ever-evolving landscape of cybersecurity.

IP Threat Intel offers instantaneous threat intelligence that aids security teams in minimizing alert fatigue and expediting triage processes within TIPs, SIEM, and SOAR platforms. It can be utilized as an API integrated into your existing systems or as a robust local database tailored for intensive on-premise operations. This feed delivers comprehensive data on IP addresses noted within the last month, detailing the specific ports that have been targeted by each address. With updates occurring every hour, it remains aligned with the evolving threat landscape. Each IP entry not only provides insights into the event volume from the past 30 days but also indicates the latest detection made by ELLIO's deception network. Additionally, it presents a complete list of all IP addresses identified today, with each entry featuring tags and comments that provide context regarding the targeted regions, volume of connections, and the most recent sighting by ELLIO's deception network. With updates every five minutes, this service guarantees that you have access to the latest information, which is crucial for effective investigation and incident response, helping to enhance your overall security posture.