Best Thermal Analysis Software in Europe

SimScale, a web-based cloud application, plays an important role in simulation software for many industries. The platform supports Computational Fluid Dynamics, Finite Element Analysis (FEA), as well as Thermal Simulation. It also provides 3D simulation, continuous modeling, motion & dynamic modelling.

Thermal Desktop is a complete model creation tool. Objects such as finite element, lumped capacitance, and built-in finite differences can be combined in any way. Thermal-specific objects, such as insulation, heat loads and heaters, can be added to any model, from automotive components to manned satellites. Thermal Desktop allows full parameterization by using variables and arbitrarily complicated expressions instead of hardwired numbers. These variables, also known as symbols, enable models to be quickly manipulated by a few keystrokes. This makes it easy to update or maintain the model, perform sensitivity studies, and investigate what-if scenarios. This gives you access to SINDA/FLUINT’s optimization and reliability modules, as well as automatic model correlation.

Energy2D, a multiphysics simulation program based on computational physics and combining particle dynamics, models all three modes for heat transfer: conduction, convection and radiation. Energy2D runs fast on most computers, eliminating the need to switch between preprocessors and solvers and postprocessors that are usually required for computational fluid dynamics simulations. It allows you design "computational experiment" to test a hypothesis or solve a problem in engineering without resorting complex mathematics. There are also plans to support different fluid types and incorporate other types energy transformations. Energy2D's conduction is very accurate, but its convection and radioactivity parts are not. Energy2D should therefore be considered qualitative in cases involving convection and/or radiation. Energy2D has been used in more than 40 scientific publications.

FloCAD®, a fluid dynamics module for Thermal Desktop®, and together they provide a complete thermohydraulic tool for integrated fluid flow analysis and heat transfer analysis. FloCAD is very similar to building thermal models. Many of the commands can be used to build fluid flow models. FloCAD models are available in two formats: they can be free-form (non geometric), sketchpad-style flow network modeling for abstraction, simplification, and convection to finite differences of finite element representations. FloCAD is a generalized software tool for capturing pressure drops in a piping system due to bends and valves, tees and changes in flow area.

Ansys Sherlock, a reliability-physics-based electronic design tool, provides fast and accurate life predictions at the component and board levels for electronic hardware in early design stages. Ansys Sherlock automates the design analysis of electronic hardware. It provides accurate and fast life predictions at the component, board, and system levels during early design stages. Sherlock bypasses the 'test-fail-fix-repeat' cycle by empowering designers to accurately model silicon-metal layers, semiconductor packaging, printed circuit boards (PCBs) and assemblies to predict failure risks due to thermal, mechanical and manufacturing stressors--all before prototype. Sherlock quickly converts embedded libraries containing more than 500,000 parts into computational fluid dynamics and finite element analysis models. Each model includes accurate geometries, material characteristics, and stress information.

Simcenter Flotherm, with its 34 years of development, user feedback and extensive experience in electronic cooling simulations for thermal analysis, is the leading software solution. It accelerates development from IC packages, PCBs, and enclosures to large systems, such as data centres. Fast, accurate CFD simulations of electronics cooling can improve electronics thermal management and reliability from the initial pre-CAD exploration through to final verification. Simcenter Flotherm is a tool that integrates into the electronics development workflow to allow thermal engineers to run simulations, and to provide accurate results in a timely manner. It also provides feedback to other engineering functions. It supports thermal management and simulation-based decisions from early-stage architectural to final thermal design validation. This helps reduce development time and eliminates the risk of expensive reliability-related warranty costs, or any late-stage respins.

ColdStream is an engineering platform for thermal simulation that runs in the cloud. It supports your entire thermal management process, from thermal design to thermal analysis. Diabatix's Thermal Simulation Software allows your business to accelerate product development by using only the latest technologies. Get insights on temperature distribution, heat dissipation and fluid flow, thermal resistance and thermal radiation, cooling capability, and more. ColdStream will find the most suitable heat sinks for your electronic devices and products. In just a few simple clicks, you can upload your geometry, configure the thermal simulator operating conditions, and set the design objectives for your heat sinks.

Pyris™, the benchmark for high-sensitivity thermal analyses, brings your PerkinElmer thermal instruments and data to life. Pyris, the most popular choice for thermal analysis, is user-friendly and intuitive. It also offers a variety of standard features to maximize flexibility. Pyris is the perfect software for any application, whether it's a fully automated research lab, an automated QA/QC laboratory, or a standalone instrument. Pyris software is constantly improved based on feedback from customers to ensure maximum user satisfaction. A common platform for the instruments makes it simple to use and easy to learn. Pyris software is simple to use, but does not lose its capabilities. The software allows you to run multiple analyzers at the same time and conduct data acquisition and analyses in one window. Data import/export flexibility and a wide range of analytical options.

RadCAD uses an ultra-fast Monte-Carlo ray-tracing algorithm that is accelerated by octa-trees to compute radiation exchange and view factors. C&R Technologies' innovations to the ray-tracing process resulted in a highly efficient thermal radiation software. RadCAD models diffuse or specular surfaces accurately, regardless of the density of nodes. The number of nodes is determined by the thermal solution, not by the accuracy requirements for the radiation. RadCAD uses user-defined databases for optical properties. Each surface coating defines absorptivity and transmissivity as well as reflectivity and specularity for both solar and infrared spectrum regimes. These properties can be defined in relation to incident angle, or even wavelength dependence.

SINDA/FLUINT is a powerful and proven heat transfer and fluids simulation tool that has been providing users with these capabilities for decades. These capabilities continue to grow each year. SINDA/FLUINT provides a generalized, comprehensive tool for simulating thermal/fluid system simulations, such as those used in the electronics, automotive and petrochemical industries, power generation, medical and aerospace industries. SINDA/FLUINT allows you to gain a better understanding and save time and money through a faster and easier design process. You decide what is important, and how you want to answer your design performance questions. The application is also completely extensible, making it the most versatile software product for thermal and fluids on the market. You can choose which features you want and decide on the accuracy and approximation levels that are appropriate. Also, you can decide on what outputs you need.

6SigmaET is an electronic thermal modeling tool that uses advanced computational Fluid Dynamics (CFD), to create precise models of electronic equipment. Our thermal simulation software is specifically designed for electronics. It offers unparalleled intelligence, automation, and accuracy to help you meet all your requirements and overcome any thermal design challenges. 6SigmaET is the fastest-growing thermal simulator software in the electronics cooling market since its inception in 2009. 6SigmaET's versatility allows you to simulate the thermal performance electronic components, from the smallest ICs up to the most powerful servers. Watch one of our videos to learn more about 6SigmaET's benefits for your industry. Or, browse our case studies. You can import the entire CAD geometry and PCB designs into 6SigmaET to perform thermal analysis. This will reduce the time it takes to create models.

Ansys Fluent, the industry-leading fluid sim software, is known for its superior physics modeling capabilities as well as industry-leading accuracy. Ansys Fluent allows you to innovate and optimize your product performance. You can trust your simulation results when you use software that has been thoroughly tested across a variety of applications. Ansys Fluent allows you to create advanced physics models, analyze fluid phenomena, and more - all in an intuitive and customizable environment. This powerful fluid simulation software will accelerate your design cycle. Ansys Fluent has the best-in-class physics models. It can efficiently and accurately solve large, complex models. Ansys Fluent unlocks the potential for CFD analysis. Fluid simulation software that is fast and efficient. This software will help you to be the best in the market. Fluent's industry-leading features allow for endless innovation without compromising on accuracy.

MSC Nastran is a multidisciplinary application for structural analysis that engineers use to perform static, dynamic and thermal analysis in the linear and nonlinear domains. It also includes automated structural optimization and award-winning embedded fatigue analysis technologies. All of this is enabled by high performance computing. MSC Nastran is used by engineers to ensure structural systems are strong, stiff, and durable. This helps to prevent structural failures (excess stress, resonance, buckling or other detrimental deformations) which could compromise structural function and safety. MSC Nastran can also be used to improve structural designs' economy and passenger comfort. Creating industry-leading product differentiations or optimizing existing designs can lead to industry advantages. Reduce downtime and costs by resolving structural problems that may arise during product service.

Simcenter Nastran is a leading finite element method (FEM), solver for computational performance and accuracy, reliability, and scalability. Simcenter Nastran offers powerful solutions for structural analysis, optimization, aeroelasticity, thermal analysis and rotor dynamics. Simcenter Nastran provides all the solutions in one solver. This simplifies modeling and makes it easier to use all solution types. Simcenter Nastran is available as a standalone enterprise solver and as an integrated solver within Simcenter 3D. It helps manufacturers and engineering suppliers in aerospace, electronics, heavy machine, medical device, and other industries with their critical engineering computing requirements so they can produce safe and reliable designs in shorter design cycles.

AnyCasting Software has been a leading simulation program for castings for over 20 years. We are currently working with companies that manufacture automobiles, ships and heavy material industries. We have sold over 600 copies in the world and solved and provided technical consulting on over 470 projects. AnyCasting offers stress analysis that can be used to simulate deformation, heat and stress analysis. It can also help users design the best mold by providing automatic mold designing. Hyundai Motors and Hyundai Heavy Industries are among the domestic customers who have been satisfied. Identify the location of gas defect caused by the isolation air during the filling process and flow of the melt. Our software locates defects by comparing air pressure to the pressure in the melt.

Take advantage of the power of thermal analysis for natural solidification in a software package that is affordable and capable. CAPlite has a simple, step-by-step graphical user interface that is ideal for anyone who does not have experience with casting software. CAPlite takes you from a CAD model through to the post-processing. Natural solidifications provide results in minutes. CAPlite can identify casting problems in all types of castings, from die casting to sandcasting. Natural solidifications are easy to use and can be used to enhance your entire casting process at any stage. They can help identify defects or visualize the otherwise abstract solidification process. CAPlite gives you the power of natural sinterings and more, allowing you to improve your castings for a fraction of their cost.

CoTherm, a coupling software and process automation program, acts as a liaison between CAE programs. CoTherm simplifies process automation. It can be used to run sensitivity studies, design of experiments or multiple CAE models in a single process. This capability can streamline preprocessing, thermal analysis or transient analysis. CoTherm provides templates for common coupling and automation tasks. CoTherm has optimization capabilities to determine the best inputs for your design. The general optimization sub-processes can be used to optimize any CAE analysis. CoTherm’s mathematically rigorous solution, including multiple global and local methods, removes guesswork from your design process. CoTherm supports a wide range of thermal and CFD code. CoTherm’s powerful tools enable the coupling of any program that can be run from the command line or config files.

Simcenter MAGNET provides a powerful electromagnetic simulation solution to predict the performance of motors and generators. It can also be used for predicting the performance of sensors, transformers. actuators, solenoids or any other component with permanent magnets. Simcenter MAGNET allows you to predict the performance of any part with permanent magnets or coils. Simulate low-frequency electromagnetic fields. Simcenter MAGNET has the ability to accurately model electromagnetic devices. This includes the ability to model manufacturing processes, temperature-dependent material properties, magnetization and de-magnetization modeling, and vector hysteresis models among others. Simcenter MAGNET also has a built-in motion solver with a six-degree-of-freedom capability. It allows complex problems such as magnetic levitation and complex motions to be accurately modelled and analyzed. A unique smart remeshing technology makes this possible.

Our STARe software sets the standard for thermal analysis. It offers virtually limitless evaluation options. Modularity, flexibility and automation are some of its unique features. The software helps you stay compliant in a regulated field. All of our thermal systems can be controlled by a single powerful software platform. We offer the most comprehensive line of thermal systems and instruments. Our thermal analysis software, STARe, is easy to use and powerful. The instruments receive measurements and experiments, and the curves are evaluated instantly based on user preferences. STARe is the industry standard in thermal analysis software. It is a software that is extremely flexible and offers almost limitless possibilities for evaluation. STARe is the comprehensive software that powers METTLER TOLDEO’s thermal analysis systems. It simplifies workflows.

Simulate all heat transfer phenomena from convection and radiation to storage and dissipation. Simulate both steady-state and dynamic environmental influences. TAITherm is as powerful as it is easy to use. It can solve for solar and thermal radiation as well as convection and conduction in ever-changing environments. TAITherm eliminates the need for complex thermal simulations, and ensures your design will perform optimally in real-world scenarios. TAITherm has been used by thousands engineers and teams worldwide. TAITherm is used by our customers for a wide range of applications, including the latest advancements and technologies in automotive, electronics wearables, military, architecture, and other fields. Thermal simulations and thermal analyses are helping our customers push the boundaries of technology. They increase usability, safety and effectiveness for their industries.