RB5009UPr+S+IN Description
The RB5009 version has all the bells & whistles of the previous model, including Gigabit Ethernet and 2.5 Gigabit Ethernet. There is also a 10 Gigabit SFP+ box for fiber connectivity. It has the speed and power as well as the durability. This time, we added PoE in & PoE out to all eight Ethernet ports. You get 10 different ways to power your device, thanks to the DC jack and the 2-pin connector. Dual redundant power supplies will usually increase your uninterrupted uptime. The RB5009UPr+S+IN is a step beyond that! All power options can support a wide voltage range from 24 to 57 V. However you cannot mix the voltages. If you use PoE-out to power another device, the board will choose to power them from the source with the highest voltage (DC Jack or 2-pin connector).
RB5009UPr+S+IN Alternatives
RB2011iLS-IN
Desktop metal case, 5xEthernet and 5xGigabit Ethernet. SFP cage. PoE out on port 10. 600MHz CPU. 64MB RAM. RouterOS L4. RB2011iLS is the first product to include a SFP cage for gigabit-sFP transceivers. It is an ideal solution for FTTH implementations. The RB2011iLS features 11 ports, Gigabit Ethernet ports and five Gigabit Ethernet port that can be connected together to provide a wire-speed fiber–to-copper converter and five additional fast Ethernet ports. The board can be powered via power jack or PoE. SFP transceiver not included. RB2011iLS supports 1.25G SFP transceivers within the SFF committee specifications. RB2011LS does not support passive optical network (PON) hardware support. Tested and recommended for use with MikroTik SFP Modules S-85DLC05D and S-31DLC20D (not include). It is powered by the Atheros Next Generation 600MHz 74K MIPS network processor, has 64MB RAM, and a Level4 RouterOS licence.
Learn more
CCR2216-1G-12XS-2XQ
Our new flagship product, the Cloud Core Router 2216, is now available! Its powerful 16-core CPU can compete with the powerful 72-core Tile CPU from our previous flagship, the CCR1072. The Marvell Prestera Aldrin2 switch chip really takes it to the next level, with L3 Hardware offloading! The previous CCR2116 had a switch-chip that had four 10G CPU connection lines. This time, there are four 25G lines! There are two QSFP28 cages that provide 100 Gigabit connectivity at blazing speeds, twelve SFP28 cages that allow for 25 Gigabit networking and a Gigabit Ethernet connection. The device has 16 GB RAM, decent NAND storage, two M.2 SATA slot slots, and a Gigabit Ethernet port. There are four hot-swappable fans and dual-redundant hot–swap power sources. These PSUs may look familiar if your CCR1072 has been used before. You can continue to use your existing hot-swap power supply and SFP modules.
Learn more
PowerBox Pro
Five Gigabit Ethernet routers with four PoE-out ports, a SFP cage and an outdoor enclosure. The PowerBox Pro outdoor five-gigabit Ethernet router has PoE output on four ports. The device can be mounted on a tower or other outdoor locations thanks to its weatherproof outdoor case. It supports passive PoE input as well as passive or 802.3af/at PoE output. Other PoE-capable devices can be powered by the Ethernet ports 2-5 with the same voltage as the unit. There are fewer power adapters and cables that you need to worry about. It can power 802.3at or af mode compatible devices when 48-57 input voltage has been used. The device also has an SFP port that allows for optical fiber connectivity. It is small and easy to use. However, it has a powerful 800MHz CPU that can handle all advanced configurations supported by RouterOS. The operating system is preinstalled on the device and licensed. The product is ready for use and requires no additional purchase.
Learn more
FiberBox Plus
The Fiber Box Plus can be viewed in two ways. It's a major upgrade to our FiberBox devices. This version has a new ARM CPU, more RAM and four 10-Gigabit SFP+ port. You can get reliable and fast connectivity without breaking the bank. Without the limitations of Ethernet's distance. A Gigabit Ethernet port is available for management and PoE-in powering. You also get a 2-pin terminal as well as a standard DC Jack, giving you 3 power options. FiberBox Plus can accept input voltages from 24-57V. It is also extremely efficient, with a maximum power consumption of 7W (without attachments). The FiberBox Plus is a budget version for the incredible netFiber 9. If you don't require the additional Gigabit SFP ports, you can save a lot. It also features the same Marvell 98DX226S switch chip, which ensures that the performance is unbeatable!
Learn more
Pricing
Pricing Starts At:
$299 one-time payment
Integrations
No Integrations at this time
Company Details
Company:
MikroTik
Year Founded:
2009
Headquarters:
United States
Website:
mikrotik.com/product/rb5009upr_s_in
Media
Recommended Products
The #1 Embedded Analytics Solution for SaaS Teams.
Qrvey’s comprehensive embedded analytics software enables you to design more customizable analytics experiences for your end users.
Product Details
Type of Training
Documentation
Webinars
In Person
Videos
Customer Support
Online
RB5009UPr+S+IN Features and Options
RB5009UPr+S+IN User Reviews
Write a Review- Previous
- Next