Alternatives to MSC Nastran

Azore is software for computational fluid dynamics. It analyzes fluid flow and heat transfers. CFD allows engineers and scientists to analyze a wide range of fluid mechanics problems, thermal and chemical problems numerically using a computer. Azore can simulate a wide range of fluid dynamics situations, including air, liquids, gases, and particulate-laden flow. Azore is commonly used to model the flow of liquids through a piping or evaluate water velocity profiles around submerged items. Azore can also analyze the flow of gases or air, such as simulating ambient air velocity profiles as they pass around buildings, or investigating the flow, heat transfer, and mechanical equipment inside a room. Azore CFD is able to simulate virtually any incompressible fluid flow model. This includes problems involving conjugate heat transfer, species transport, and steady-state or transient fluid flows.

SkyCiv Structural 3D, a cloud-based Structural Analysis program, allows users to design, analyze, and model complex 3D structures. It can be used online and does not require installation. SkyCiv Structural 3D is the best online structural analysis. It includes the following: – Powerful Analysis: Linear and P-Delta Cables, Buckling Plates, Frequency RS - Integrated design checks for steel, wood connections, foundations wind (AISC. NSD. AISI. EN. AS. CSA. BS plus more ...)

SimSolid is the revolutionary simulation technology for engineers, designers, and analysts. It performs structural analyses on fully-featured CAD assemblies in minutes. SimSolid eliminates geometry preparation, meshing, and other errors that are time-consuming and difficult to perform in conventional structural simulations. Multiple design scenarios can be simulated quickly under real-life conditions. You can use any CAD model, even an early one. SimSolid tolerance for imprecise geometry means SimSolid simulation tools don't need to be simplified before analyzing designs. SimSolid supports all types of connections (bolt/nuts, bonded, rivets and sliding) and analysis for linear static, modal, and thermal properties. It also supports complex coupled, nonlinear, dynamic effects.

RSTAB is a powerful software that allows structural engineers to meet the requirements of modern civil engineering. It provides a 3D beam, frame or truss calculation. Use the RSTAB software to design beam, frame or truss constructions made of steel, concrete, wood, aluminum or other materials. RSTAB allows you to quickly and easily define a structure model, then calculate internal forces, deformations and support reactions. You can use the design add-ons to take into account material- and standard specific requirements.

The FEA program RFEM enables quick and easy modeling, structural, and dynamic calculation as well as the design and construction of models with member and plate, wall, folded plates, shell, shell, and other solid elements. Modular software allows you to connect the main program RFEM to the appropriate add-ons to meet your specific requirements. Structural analysis program RFEM offers structural engineers a 3D FEA tool that meets all modern civil engineering requirements. Simple and complex structures can be modelled with ease thanks to efficient data input and intuitive handling. The basis of a modular software program is the structural analysis program RFEM. The RFEM basic program is used to create structures, materials, loads, and plans for spatial and planar structural systems that include plates, walls, shells and members. You can also create mixed structures and model contact elements.

FloCAD® serves as an add-on module for Thermal Desktop®, creating a comprehensive software solution for thermohydraulic analysis that encompasses fluid flow and heat transfer. The process of constructing fluid flow models in FloCAD closely resembles that of thermal models, allowing for the use of numerous shared commands across both model types. Users can create FloCAD models using a free-form approach, which allows for the simplification and abstraction of flow networks, or they can opt for geometry-based modeling that incorporates elements like pipe centerlines, cross-sections, and intricate vessels, as well as convection calculations linked to finite difference or finite element thermal structures. As an advanced tool for pipe flow analysis, FloCAD effectively accounts for pressure losses within piping networks arising from bends, valves, tees, and variations in flow area, among other factors. This versatility makes FloCAD a valuable asset for engineers looking to optimize system designs.

Simcenter Nastran stands out as a leading finite element method (FEM) solver known for its exceptional computational performance, precision, dependability, and scalability. This comprehensive tool provides robust solutions for various applications, including linear and nonlinear structural analysis, structural dynamics, acoustics, rotor dynamics, aeroelasticity, thermal analysis, and optimization. One of the key benefits of having such a diverse array of solutions within a single solver is that it standardizes input/output file formats across all types of analyses, significantly streamlining the modeling process. Whether utilized as an independent enterprise solver or integrated within Simcenter 3D, Simcenter Nastran is instrumental for manufacturers and engineering firms across several sectors, including aerospace, automotive, electronics, heavy machinery, and medical devices. By catering to their vital engineering computing requirements, it enables these industries to deliver safe, reliable, and optimized designs while adhering to increasingly tighter design timelines. This versatility and efficiency make Simcenter Nastran an invaluable asset in the modern engineering landscape.

GT STRUDL® stands out as a comprehensive structural engineering software that integrates 3D CAD modeling and advanced 64-bit computation solvers in its various versions. This software provides a full suite of tools for analyzing a wide array of structural engineering and finite element analysis challenges, encompassing both linear and nonlinear static and dynamic analyses, achieving high accuracy in significantly less time compared to most other design software available. Designed to assist structural engineers in developing safe and efficient designs, GT STRUDL effectively addresses the complexities that arise across multiple industries such as power generation, civil engineering, marine applications, and infrastructure development. Moreover, quality software like GT STRUDL boasts a range of features, including interoperability, structural analysis capabilities, database-driven design, and quality assurance, all aimed at enhancing the engineering design process. This robust combination of functionality and efficiency makes GT STRUDL a valuable asset for engineers tackling intricate projects.

Subjecting your designs to real-world scenarios can significantly enhance product quality while simultaneously minimizing the costs associated with prototyping and physical testing. The SOLIDWORKS® Simulation suite offers a user-friendly collection of structural analysis tools that employ Finite Element Analysis (FEA) to forecast how a product will behave in actual physical conditions by virtually evaluating CAD models. This comprehensive portfolio is equipped with capabilities for both linear and non-linear static and dynamic analyses. With SOLIDWORKS Simulation Professional, you can refine your designs by assessing mechanical resistance, durability, topology, natural frequencies, as well as examining heat transfer and potential buckling issues. Additionally, it facilitates sequential multi-physics simulations to enhance design accuracy. On the other hand, SOLIDWORKS Simulation Premium allows for an in-depth assessment of designs concerning nonlinear and dynamic responses, dynamic loading conditions, and composite materials. This advanced tier also features three specialized studies: Non-Linear Static, Non-Linear Dynamic, and Linear Dynamics, ensuring a thorough evaluation of your engineering projects. By leveraging these powerful tools, engineers can achieve greater design confidence and innovation.

Ansys Mechanical stands out as an exceptional finite element solver, featuring capabilities in structural, thermal, acoustics, transient, and nonlinear analyses to enhance your modeling processes. This powerful tool allows you to tackle intricate structural engineering challenges, facilitating quicker and more informed design choices. The suite's finite element analysis (FEA) solvers permit the customization and automation of solutions for structural mechanics issues, enabling the examination of various design scenarios through parameterization. With its extensive array of analysis tools, Ansys Mechanical provides a versatile environment, guiding users from geometry preparation to integrating additional physics for enhanced accuracy. Its user-friendly and adaptable interface ensures that engineers at any experience level can swiftly obtain reliable results. Overall, Ansys Mechanical fosters an integrated platform that leverages finite element analysis (FEA) for comprehensive structural evaluations, proving invaluable for modern engineering projects.

With STAAD, you are empowered to design, assess, and document structural projects globally, utilizing any material you choose. This software provides a versatile solution tailored to meet all your structural engineering requirements from the ground up. STAAD serves as an all-encompassing application for structural finite element analysis and design, enabling users to conduct evaluations on any structure subjected to various loads including static, dynamic, wind, seismic, thermal, and moving forces. Available in multiple variations, STAAD allows you to select the version that best suits your specific needs. Renowned for its analytical capabilities, extensive applications, interoperability, and efficiency, STAAD is a favored choice among structural engineers. It facilitates 3D structural analysis and design for both steel and concrete frameworks. Furthermore, a physical model created within the software can easily be converted into an analytical model for in-depth structural analysis. STAAD incorporates numerous design code standards, ensuring compliance and accuracy in engineering practices. In addition, its user-friendly interface enhances productivity, making complex design processes simpler and more efficient.

SolidFEA is a groundbreaking solid finite element analysis tool that aims to make sophisticated structural engineering design both more accessible and cost-effective. Utilizing the Calculix engine, it provides in-depth sub-model analysis while requiring less financial investment and computing power compared to competitors such as Abaqus. This software is particularly well-suited for tackling intricate engineering challenges, such as those found in steel connections and bridge engineering, and it empowers users by making specialized software easier to access. With its ability to import IFC file formats, SolidFEA integrates smoothly into existing engineering workflows, enhancing the functionality of our GenFEA software for thorough structural analysis. By lowering entry barriers traditionally tied to solid finite element analysis (FEA), SolidFEA represents a significant advancement in structural engineering design and encourages innovation by allowing more engineers to participate in complex projects. Ultimately, its user-friendly design and compatibility features facilitate a new era of efficiency in engineering practices.

Fatigue Essentials is a desktop software designed to streamline the process of structural fatigue analysis. This application offers an intuitive interface for performing stress-life evaluations, utilizing either traditional stress calculations or integrating with FEMAP™ to leverage finite element analysis results. The program is designed with a user-friendly tree structure that guides users through various stages of analysis, starting with selections related to loads, materials, and spectrum branches. Each section allows for different variations of analysis or methods of input. Users can view analysis results directly on the screen, which can be easily copied into reports or visualized as damage contour plots in FEMAP. It encompasses a wide range of engineering needs, featuring a classic mode that allows for manual input of stresses and a professional mode linked with FEMAP, which can read nodal stresses and generate damage contour visualizations. Additionally, users have the flexibility to choose between interactive input or file uploads for entering stresses and cycles, enhancing the application's versatility. Ultimately, Fatigue Essentials stands out as an essential tool for engineers engaged in fatigue analysis.

S-FRAME empowers users to model, analyze, and design any type of structure, accommodating a wide range of geometric complexities, material specifications, loading scenarios, nonlinear behaviors, and design code stipulations. The platform features automated framework generators that facilitate rapid model creation and offers seamless integration with BIM and DXF formats, allowing users to enhance their efficiency with built-in design tools for concrete and steel, which support design, optimization, code adherence, and report generation. Through S-FRAME, users can swiftly define structures with advanced modeling automation, enabling the generation of regular framework structures and both standard and custom trusses, while clone tools allow for the easy replication of entire models or specific sections. Moreover, the ability to import existing BIM and DXF models significantly reduces modeling time, further improving productivity. The sophisticated meshing capabilities of S-FRAME create a detailed finite element mesh, equipping users to derive comprehensive analysis results tailored to their areas of interest. Lastly, users have the flexibility to delve deeper into their analysis by converting members into multi-shell models, enhancing their understanding and evaluation of structural performance.

SwiftComp is an innovative composite simulation software that combines multiscale and multiphysics capabilities to provide the precision of 3D finite element analysis (FEA) with the simplicity of basic engineering models. This groundbreaking tool simplifies the modeling process for engineers, allowing them to treat composites with the same ease as metals while maintaining accuracy and capturing intricate microstructural details. It offers cohesive modeling for structures that are one-dimensional (like beams), two-dimensional (such as plates or shells), and three-dimensional, effectively calculating the material properties required. Users can utilize SwiftComp independently for virtual composite testing or as an enhancement to existing structural analysis tools, thereby integrating high-fidelity composite modeling into their workflows. Additionally, SwiftComp excels in determining the optimal structural model for macroscopic analysis and includes capabilities for dehomogenization, which enables the calculation of pointwise stresses within the microstructure. It seamlessly connects with established software such as ABAQUS and ANSYS, further broadening its applicability in engineering projects. As a result, SwiftComp significantly enhances the efficiency and effectiveness of composite material modeling in various engineering applications.

Numerous professionals utilize VisualAnalysis (VA) to efficiently meet their project deadlines. Users frequently commend it as "exceptional value" and "incredibly user-friendly." It provides essential tools that are budget-conscious. The software allows for the creation of 3D models for a variety of structures, including complete buildings, tanks, and towers, alongside offering both static and dynamic response analysis capabilities. It performs design code verifications for materials such as steel, wood, concrete, cold-formed steel, and aluminum. VisualAnalysis features comprehensive analysis and design functionalities, including automatic plate meshing, a command window, nonlinear elements, and dynamic time history analysis. Its 3D static and dynamic finite element analysis (FEA) is suitable for civil, mechanical, aerospace, and other types of structural evaluations. Additionally, it includes optional support for building code load combinations. Users can easily apply loads, distribute area loads to structural members, and manage gravity and lateral loads within the same project. The software enables the creation of frame, truss, or FEA models for nearly any type of structure, with the ability to sketch, generate, and import designs from CAD or BIM tools like Revit. With its rapid static analysis, P-delta calculations, AISC Direct methods, dynamic assessments, and nonlinear capabilities, it delivers proven and validated results for engineering professionals. Overall, VisualAnalysis stands out as a versatile solution for various engineering needs.

Inventor® Nastran® is a finite element analysis (FEA) tool integrated within CAD software, enabling engineers and analysts to perform a diverse range of studies using various materials. This software provides comprehensive simulation capabilities that encompass both linear and nonlinear stress analysis, dynamic simulations, and heat transfer assessments. It is exclusively accessible through the Product Design & Manufacturing Collection, which includes a suite of powerful tools designed to enhance workflows within Inventor. In addition to advanced simulation features, this collection also offers 5-axis CAM, nesting tools, and access to software like AutoCAD and Fusion 360, ensuring a holistic approach to product design and manufacturing processes. By utilizing Inventor Nastran, professionals can streamline their analysis and improve their design outcomes significantly.

SPACE GASS is a versatile 3D analysis and design software tailored for structural engineers. Its broad array of features accommodates everything from beams and trusses to complex structures like buildings, towers, tanks, cable systems, and bridges. Users can benefit from a powerful 64-bit multi-core solver, impressive 3D visualizations, and specialized elements including plate, frame, cable, and tension/compression-only types, as well as tools for moving loads and integrations with various CAD and building management systems. Choosing SPACE GASS means optimizing your resources with cost-effective, safe, and efficient designs. The user-friendly graphical interface allows for immediate visual feedback on changes, enhancing the design process. Additionally, a rapid sparse matrix solver takes full advantage of multi-core processing capabilities for increased efficiency. The software features a diverse suite of structural modeling tools, analysis methodologies, and design modules to meet various engineering needs. Moreover, an array of comprehensive video tutorials is available to guide users through complex tasks effectively. Finally, the software can be configured for either stand-alone use or floating network systems, adding flexibility for different working environments.

In times of tight schedules or limited resources, integrated solutions are crucial. RIBTEC provides many synergies in calculation design, construction, and design. In the context of Building Information Modeling (BIM), you can benefit from a faster data flow that streamlines the entire process of structural design. RIB's software solutions are available for structural engineers. They include building, ground, and finite element calculations as well as tunnel and bridge construction as well as the drawing of formwork or reinforcement plans. Since 1961, RIB has been a pioneer in structural design and FEM. Over 5,000 engineering offices, inspection and construction engineers, as well as planning departments from the public and private sectors use the RIBTEC programs. RIBTEC covers all aspects of structural design with more than 100 programs.

nCode DesignLife serves as a proactive design tool that pinpoints essential areas and estimates realistic fatigue lifespans based on top finite element (FE) analysis results applicable to both metals and composites. This innovative tool empowers design engineers to enhance their approach beyond basic stress assessments, enabling them to simulate real-world loading scenarios and thereby mitigate the risks of both under-design and over-design in their products, which can lead to expensive modifications later on. Additionally, the software offers features like virtual shaker testing, fatigue analysis for welds, vibration fatigue assessments, crack growth monitoring, fatigue evaluation for composites, and thermo-mechanical fatigue studies. It leverages advanced technologies for analyzing multiaxial stress, weld integrity, short-fiber composites, vibrational impacts, crack propagation, and thermal stress fatigue. With a user-friendly graphical interface, it facilitates comprehensive fatigue analysis using data from leading FEA tools such as ANSYS, Nastran, Abaqus, Altair OptiStruct, LS-Dyna, among others. Moreover, it incorporates multi-threaded and distributed processing capabilities, enabling efficient handling of large finite element models and optimizing overall usage schedules. This powerful combination of features ultimately ensures that engineers can deliver more reliable and efficient designs.

GenFEA exemplifies our commitment and passion, resulting from extensive years of careful research and development. This project, fueled by our enthusiasm, is on the brink of transforming the industry with its AI-powered features that introduce cutting-edge technological innovations to the worldwide market. We believe that with GenFEA, we can create a remarkable influence by providing pioneering solutions that address the intricate challenges and requirements of the global AEC sector. Traditionally, structural engineering software has been burdened with high costs, complex learning processes, and a sluggish pace in adopting modern technological advancements. By harnessing the power of the latest artificial intelligence, delivering a seamless user experience, and maintaining affordability, GenFEA is committed to making sophisticated structural analysis and design tools more accessible, user-friendly, and aligned with the groundbreaking technologies shaping our time. Ultimately, our goal is to empower professionals in the field with tools that enhance their capabilities and efficiency in project execution.

SimScale, a web-based cloud application, plays an important role in simulation software for many industries. The platform supports Computational Fluid Dynamics, Finite Element Analysis (FEA), as well as Thermal Simulation. It also provides 3D simulation, continuous modeling, motion & dynamic modelling.

e-Xstream engineering specializes in the development and commercialization of the Digimat software suite, which features advanced multi-scale material modeling technology that accelerates the creation of composite materials and structures. Serving as a fundamental component of the 10xICME Solution, Digimat enables in-depth analyses of materials at the microscopic level and facilitates the creation of micromechanical models that are essential for integrating micro- and macroscopic interactions. The material models provided by Digimat allow for the combination of processing simulations with structural finite element analysis (FEA), paving the way for more accurate predictions by considering how processing conditions affect the final product's performance. Utilizing Digimat as an efficient and predictive tool significantly aids users in the design and manufacturing of cutting-edge composite materials and components, leading to substantial savings in time and costs. Ultimately, this capability empowers engineers to push the boundaries of innovation in composite material applications.

Ansys Sherlock stands out as the sole reliability physics-based tool for electronics design that delivers quick and precise life expectancy assessments for electronic components, boards, and systems during the initial design phases. By automating the design analysis process, Ansys Sherlock enables the rapid generation of life predictions, thus eliminating the "test-fail-fix-repeat" cycle that often hampers development. Designers can effectively model the interactions between silicon–metal layers, semiconductor packaging, printed circuit boards (PCBs), and assemblies, allowing for accurate predictions of potential failure risks stemming from thermal, mechanical, and manufacturing stresses, all prior to creating prototypes. Additionally, Sherlock's extensive libraries, which house over 500,000 components, facilitate the seamless transformation of electronic computer-aided design (ECAD) files into computational fluid dynamics (CFD) and finite element analysis (FEA) models. Each of these models is equipped with precise geometries and material properties, ensuring that stress information is accurately conveyed for reliable predictions. This capability not only enhances design efficiency but also significantly reduces the risk of costly errors in the later stages of product development.

Thermal Desktop encompasses every facet of creating models, integrating various built-in objects like finite difference, finite element, and lumped capacitance that can be arranged in numerous ways. Users can incorporate thermal-specific components such as contact conductance, insulation, heat loads, and heaters, enabling the modeling of a wide range of systems from automotive parts to crewed spacecraft. The software features comprehensive parameterization, allowing input through variables and complex expressions instead of fixed numerical values. These variables, known as symbols, facilitate swift adjustments to models with minimal effort, simplifying the process of updating or maintaining them, as well as conducting sensitivity analyses and exploring hypothetical scenarios. Furthermore, this capability enhances access to SINDA/FLUINT’s modules for optimization and reliability, along with automated model correlation, ultimately enriching the modeling experience. By streamlining these processes, Thermal Desktop not only improves efficiency but also fosters innovation in thermal analysis.

Patran offers an extensive array of tools designed to facilitate the development of models ready for analysis across various domains, including linear and nonlinear problems, explicit dynamics, thermal analysis, and more within finite element solutions. Its geometry cleanup features assist engineers in efficiently addressing issues like gaps and slivers present in CAD designs, while solid modeling capabilities allow users to construct models from the ground up. The software simplifies the mesh generation process on both surfaces and solids through a combination of fully automated meshing routines and manual techniques that afford users greater precision. Additionally, Patran includes built-in options for setting up loads, boundary conditions, and analyses compatible with leading finite element solvers, significantly reducing the need for adjusting input files. With its robust and industry-validated functionalities, Patran ensures that virtual prototyping is not only swift but also effective, enabling users to assess product performance against specific requirements and refine their designs accordingly. As a result, engineers can spend less time on setup and more on innovation and optimization.

Currently, engineering teams frequently rely on specialized simulation tools from various vendors to assess different design characteristics, which can lead to inefficiencies and higher costs due to the use of multiple software solutions. To address these challenges, SIMULIA offers a comprehensive suite of cohesive analysis products that enable users with varying levels of simulation knowledge and expertise to collaborate effectively while sharing simulation data and approved methodologies without compromising information integrity. The Abaqus Unified FEA product suite provides robust and comprehensive solutions for both standard and advanced engineering challenges, catering to a wide range of industrial applications. In the automotive sector, engineering teams can analyze complete vehicle loads, dynamic vibrations, multibody systems, impact and crash scenarios, nonlinear static situations, thermal interactions, and acoustic-structural relationships, all while utilizing a unified model data structure and integrated solver technology. This seamless integration enhances collaboration and improves the overall efficiency of the engineering process, allowing teams to innovate more rapidly.

SDC Verifier serves as a comprehensive software tool for structural design, finite element analysis (FEA), and compliance verification with relevant design codes and standards. It can function as a standalone application or as an add-on to platforms like Ansys Mechanical, Femap, and Simcenter 3D, enhancing their capabilities for engineers and designers.

Every project presents its own set of challenges, yet conducting geotechnical analysis can be straightforward with the right tools. PLAXIS 2D streamlines the process by offering rapid computational capabilities. It enables sophisticated finite element or limit equilibrium analysis concerning soil and rock deformation and stability, including aspects like soil-structure interaction, groundwater, and thermal dynamics. As an exceptionally powerful and intuitive finite-element (FE) software, PLAXIS 2D specializes in 2D analyses relevant to geotechnical engineering and rock mechanics. Used globally by leading engineering firms and academic institutions, PLAXIS is a staple in the civil and geotechnical sectors. The software proves to be versatile, accommodating various applications such as excavations, embankments, foundations, tunneling, mining, oil and gas projects, and reservoir geomechanics. Notably, PLAXIS 2D encompasses all necessary features for conducting deformation and safety assessments for soil and rock, without delving into complex factors like creep, steady-state groundwater, thermal flow, consolidation, or any time-dependent phenomena. This makes it an invaluable resource for engineers focused on efficiency and accuracy in their analyses.

AxisVM is primarily utilized for designing buildings, along with industrial and geotechnical structures. Its robust finite element solver combined with practical modeling tools makes it suitable for bridge design, as well as for developing composite structures, machines, and vehicles. In addition to standard configurations, users have access to optional design modules tailored for structures constructed from reinforced concrete, steel, timber, and masonry members and connections. Furthermore, the software's unique elements and advanced analysis capabilities enable the successful design of innovative and custom structures. Additionally, users can generate comprehensive reports that include tables, drawings, and detailed design calculations, complete with tailored headings and text. These reports are dynamically updated, automatically reflecting the latest model data and results, ensuring accuracy and relevance in documentation. This feature enhances user efficiency by simplifying the reporting process.

A robust and adaptable preprocessor designed for generating high-quality finite element meshes at an appealing cost that is significantly lower than international alternatives. It offers strength assessments for both static and dynamic loads, as well as the ability to determine natural frequencies and vibration modes. Users can also analyze critical loads and buckling modes effectively. The software supports both 2D and 3D computations for various structures, including volumetric, thin-walled, and bar configurations. It incorporates elastoplastic deformation analysis based on the Mises and Drucker-Prager models, alongside strength evaluations for large displacements. Additionally, it calculates thermal conditions, heat loss, and temperature-induced deformations in parts and structures, while also providing strength assessments for materials with high elasticity. This comprehensive approach ensures that engineers can conduct thorough analyses across a wide range of applications.

Elevate your product design by incorporating simulation and analysis, which helps minimize expensive physical prototyping while enhancing the durability, reliability, and safety of your products. Employing digital prototypes to assess the performance of your designs in real-world scenarios is crucial for successful product development. Creo Simulation is specifically tailored for engineers, featuring a robust suite of structural, thermal, and vibration analysis tools along with an extensive range of finite element analysis (FEA) capabilities. With Creo Simulation, you can effectively evaluate and affirm the performance of your 3D virtual prototypes prior to producing the first physical component. We provide adaptable and innovative simulation solutions to meet the distinct needs of our customers. This section serves as a resource to explore our offerings tailored to your requirements, and should you have any inquiries about our toolset, please do not hesitate to reach out to a Creo representative for assistance. This proactive approach ensures that your products not only meet but exceed expectations in their respective markets.

HyperWorks offers easy-to-learn and effective workflows that leverage domain expertise and increase team productivity. This allows for efficient development of today's complex and connected products. Engineers can now move seamlessly from one domain to another with the new HyperWorks experience. They can even create reports without ever leaving the model. HyperWorks allows you to create, explore, and optimize designs. These designs can accurately model structures, mechanisms and fluids as well as electrical, embedded software, systems designs, and manufacturing processes. The solution-specific workflows improve a variety of engineering processes, including fatigue analysis, CFD modeling, concept design optimization, design exploration, and CFD modeling. Each interface is intuitive and well-designed, and differentiated for each user. It's also consistent and easy to use.

After over 34 years of refinement and input from users, Simcenter Flotherm has established itself as the premier software for electronic cooling simulations, specifically tailored for thermal analysis of electronics. This powerful tool accelerates product development across various levels, from IC packaging and PCB design to expansive systems like data centers. By utilizing rapid and precise CFD simulations, it enhances thermal management in electronics, ensuring reliability from the initial pre-CAD exploration phase to the ultimate verification stage. Simcenter Flotherm seamlessly integrates into the electronics development process, enabling thermal engineers to conduct simulations that yield prompt and precise results, which are crucial for collaboration with other engineering teams. Furthermore, it facilitates informed decision-making regarding thermal management from the initial architectural stages to the final verification of thermal designs. This comprehensive approach not only shortens development timelines but also mitigates the risks associated with expensive reliability failures and late-stage redesigns. In essence, Simcenter Flotherm stands as a vital resource for any organization aiming to enhance its electronic product performance while maintaining efficiency and reliability.

ColdStream is a cutting-edge cloud-based platform for thermal simulation engineering that streamlines every aspect of your thermal management and cooling design workflow, covering everything from thermal analysis to the creation of thermal designs. With Diabatix's advanced thermal simulation software, your organization can accelerate product development by leveraging the latest technology available. Gain crucial insights into heat transfer, including temperature distribution, heat dissipation, fluid dynamics, thermal resistance, thermal radiation, cooling capacity, and much more. Instead of wasting time searching for the most effective heat sinks to manage the cooling of your electronic devices and products, allow ColdStream to handle the process for you. You can simply upload your geometry, configure the necessary operating conditions for the thermal simulation, and establish your heat sink design goals with just a few clicks, making the process remarkably efficient and user-friendly. This innovative approach not only saves time but also enhances the accuracy and effectiveness of your thermal management solutions.

For many years, SINDA/FLUINT has been recognized for its effective and robust capabilities in heat transfer and fluid analysis, with enhancements introduced annually. This versatile tool serves as an all-encompassing platform for simulating intricate thermal and fluid systems, applicable across a variety of sectors including electronics, automotive, petrochemicals, power generation, healthcare, and aerospace. By streamlining the design process, SINDA/FLUINT enables users to save both time and financial resources, facilitating a deeper comprehension of their complex systems. You have the power to determine what aspects are crucial and how to approach your design performance inquiries in the most efficient manner. Additionally, the software's extensibility makes it potentially the most adaptable thermal and fluid analysis tool available today. Users can select the features they desire, establish the necessary levels of precision and approximation, and specify the required outputs, ensuring a tailored experience that meets their unique needs. This flexibility allows engineers to optimize their designs effectively in the challenging landscape of modern technology.

RadCAD employs an advanced, oct-tree accelerated Monte-Carlo ray tracing algorithm to calculate radiation exchange factors and view factors with remarkable speed. The enhancements introduced by C&R Technologies in the ray tracing methodology have led to the development of a highly efficient thermal radiation analysis tool. By utilizing finite difference "conics" or curved finite elements from TD Direct®, RadCAD is capable of precisely simulating diffuse and specular reflections as well as transmissive surfaces, independent of node density. The thermal solution's requirements govern the node quantity, rather than the precision needed for radiation calculations. Furthermore, RadCAD allows users to create custom databases that specify optical properties, with each surface coating detailing its absorptivity, transmissivity, reflectivity, and specularity in both solar and infrared wavelengths. These optical characteristics can be tailored to account for variations in incident angles or wavelength dependencies, enhancing the accuracy and relevance of thermal modeling. Ultimately, this level of customization ensures that RadCAD meets diverse analytical needs across various applications.

By utilizing CONSELF, you can harness the power of Computational Fluid Dynamics (CFD) and Finite Element Analysis (FEA) to enhance your product designs: reduce drag and losses related to fluid dynamics, boost efficiency, optimize heat exchange capabilities, assess pressure loads, confirm material strength, analyze deformation in component shapes, compute natural frequencies and modes, among various other functions. The platform offers both static and dynamic simulations for Structural Mechanics, accommodating the behavior of materials under elastic and plastic conditions. Additionally, it enables modal and frequency analyses, starting from widely used CAD neutral file formats, ensuring a seamless integration into your design workflow. This comprehensive approach allows for innovative solutions to complex engineering challenges.

CalculiX allows users to create, analyze, and process finite element models efficiently. It features an interactive 3D pre-and post-processor that utilizes the OpenGL API for enhanced visualization. The solver within CalculiX is capable of handling both linear and non-linear calculations, offering solutions for static, dynamic, and thermal problems. Since it employs the Abaqus input format, users can leverage commercial pre-processors seamlessly. Furthermore, the pre-processor can generate mesh-related data compatible with Nastran, Abaqus, Ansys, Code-Aster, as well as free computational fluid dynamics tools such as Dolfyn, Duns, ISAAC, and OpenFOAM. A straightforward step reader is also integrated into the system. Additionally, there are options for external CAD interfaces, broadening its usability. This versatile program is designed to operate on various Unix platforms like Linux and Irix, as well as on MS Windows, making it accessible to a wide range of users.

ideCAD One AEC is a multidisciplinary BIM software for Architecture, Structural Engineering and Detailing. It also includes Building Information Modeling (BIM). The Integrated Package offers Structural Engineers and Detailers Integrated BIM, AEC and CAD Tools that support projects at all stages of design and construction. Integrated design tools help you create high-quality, high performance Architectural and structural designs. Optimise projects with integrated Structural Analysis, Steel Design, Concrete Design, Connection Design, visualization and simulation tools. Improve predictability on the field by using integrated tools that maximize constructability. Integrated workflows for integrated modeling, multi-discipline coordination and construction documentation can accelerate design processes and improve the quality of designs.

Simcenter Femap is a sophisticated simulation tool designed for the creation, modification, and analysis of finite element models pertaining to intricate products or systems. This software allows users to implement advanced workflows for modeling individual components, assemblies, or entire systems, enabling them to assess how these models react under realistic conditions. Moreover, Simcenter Femap offers robust data-driven capabilities and graphical visualizations for results interpretation, which, when paired with the top-tier Simcenter Nastran, provides a holistic CAE solution aimed at enhancing product performance. As manufacturers strive to develop lighter yet more robust products, there is a growing emphasis on the utilization of composite materials. Simcenter stands at the forefront of composite analysis, continually advancing its material models and element types to meet industry demands. Furthermore, Simcenter accelerates the simulation process for laminate composite materials by providing an integrated connection to composite design, streamlining workflows for engineers in the field. This integration ultimately fosters innovation and efficiency in product development, paving the way for more sustainable manufacturing practices.

6SigmaET is a sophisticated tool for thermal modeling in electronics that employs cutting-edge computational fluid dynamics (CFD) to produce precise simulations of electronic devices. Tailored for the electronics sector, our thermal simulation software brings unmatched intelligence, automation, and precision to assist you in fulfilling your requirements and addressing thermal design obstacles. Since its launch in 2009, 6SigmaET has rapidly emerged as the leading thermal simulation software within the electronics cooling industry. Its flexibility enables users to assess the thermal characteristics of a wide array of electronic components, from the tiniest integrated circuits to the largest, most robust servers. You can discover more about the benefits 6SigmaET offers your field by watching our informative videos or reviewing our comprehensive case studies. Additionally, 6SigmaET allows for the seamless import of complete CAD geometry and PCB designs, significantly cutting down the time needed for model creation and enhancing overall efficiency in thermal analysis. This capability streamlines the process, enabling engineers to focus more on optimization rather than on initial setup.

The Braceworks® add-on for Vectorworks Spotlight offers design, production, and rigging experts a streamlined method to assess the performance of temporary structures when subjected to loads. This innovative module prioritizes safety and adherence to engineering regulations, facilitating a fully integrated process for modeling, analysis, and documentation all within a single interface. With regulatory demands like the Eurocodes and the rising expectations of venues, municipalities, and property owners, event design, A/V, and rigging firms are increasingly required to provide load and structural calculations for approval by structural engineers. Users can perform static analyses and finite element method (FEM) evaluations, with results visually represented on the model for straightforward interpretation. Furthermore, it allows for the automatic creation of comprehensive calculation reports, enhancing efficiency and accuracy in the documentation process. By simplifying these complex tasks, the module ultimately supports professionals in delivering safe and compliant events.

Regardless of whether your project pertains to civil engineering or mining, and whether it is situated above or below ground, RS2 provides a comprehensive platform for analyzing stress and deformation, ensuring stability, designing supports, and managing staged excavations seamlessly. The software incorporates an integrated seepage analysis tool that addresses groundwater flow in both steady-state and transient scenarios, making it ideal for evaluating dams, slopes, tunnels, and excavations. By utilizing the shear strength reduction method, RS2 automates slope stability assessments through finite element analysis, effectively determining the critical strength reduction factor. Additionally, various analysis methods such as slope stability, groundwater seepage, consolidation, and dynamic analysis can be employed for embankment evaluations. RS2 also features dynamic analysis capabilities and a wide array of advanced constitutive models to effectively model abrupt strength loss due to liquefaction. Designed for versatility, RS2 allows for the analysis of stability, stress, deformation, bench design, and support structures for both open-pit and underground excavations, ensuring comprehensive support across various engineering disciplines. This adaptability makes RS2 an invaluable tool for engineers seeking to optimize their project outcomes.

Experience the full spectrum of heat transfer processes, encompassing convection, radiation, storage, and dissipation, while addressing both steady-state and transient environmental conditions. TAITherm thermal analysis software combines simplicity with robust capabilities, effectively handling solar and thermal radiation, convection, and conduction in various dynamic environments. By alleviating the complexities associated with thermal simulations, TAITherm guarantees that your designs will perform at their best in practical situations. Engineers and teams worldwide rely on TAITherm, utilizing it for diverse applications that span cutting-edge developments in fields such as automotive, electronics, wearables, military technology, architecture, and beyond. Our clients are at the forefront of innovation, leveraging thermal simulations and analysis to enhance usability, safety, and efficiency in their respective domains, ultimately pushing the limits of technological advancement. With TAITherm, the future of thermal analysis is not only accessible but also transformative for industries striving for excellence.

Enhance the efficiency of initial hull design and evaluate the stability of current vessels more rapidly by utilizing the integrated naval architecture features in MAXSURF. Simplify the process of hull optimization with user-friendly tools that cover aspects such as hull design, stability and strength assessments, resistance and motion forecasts, as well as preliminary structural design and strength evaluations. With MAXSURF's comprehensive suite of naval architecture instruments, visualize and refine vessel designs effectively. Achieve smooth hull forms, adhere to stability standards, reduce power consumption, and guarantee comfort for crew and passengers across diverse sea conditions. Additionally, optimize structural weight while maintaining compliance with scantling requirements through the initial modeling and stress analysis of beams and plate structures. MAXSURF empowers users to elevate design standards for vessels of all sizes. Seamlessly design, analyze, and enhance various types of marine vessels while unleashing your creativity through the swift and convenient modeling of intricate vessels utilizing dynamically trimmed 3D NURB surfaces. Furthermore, this innovative software ensures that you can adapt designs to meet specific regulatory and environmental considerations, enabling more sustainable marine engineering solutions.

Ansys Fluent stands out as the premier fluid simulation software, distinguished by its cutting-edge physics modeling features and unmatched precision. By utilizing Ansys Fluent, you can dedicate more time to innovation and enhancing product efficiency. This software is backed by extensive validation across diverse applications, ensuring you can rely on its simulation outcomes. With Ansys Fluent, creating sophisticated physics models and evaluating various fluid dynamics phenomena is seamless within a user-friendly and customizable interface. This robust simulation tool significantly expedites your design process, allowing for quicker iterations and improvements. Boasting top-tier physics models, Ansys Fluent can effectively and accurately tackle intricate, large-scale simulations. The software unveils new possibilities for computational fluid dynamics (CFD) analysis. Additionally, its rapid pre-processing capabilities and swift solving times empower you to be the quickest in bringing your products to market. Fluent's unmatched features foster boundless innovation while maintaining a steadfast commitment to precision and reliability. Ultimately, Ansys Fluent not only enhances your design capabilities but also positions you ahead of the competition in a fast-paced industry.

STRAP (STRuctural Analysis Program) provides advanced software solutions tailored for structural analysis and design. It encompasses the full spectrum of the design process, extending from initial analysis to the creation of detailed drawings, and offers design engineers flexible options for an extensive variety of concrete and steel structures such as residential and commercial buildings, bridges, industrial facilities, retaining tanks, communication towers, and much more. This software stands out as a comprehensive tool for designing a broad array of structures, ranging from small residential projects to complex high-rise buildings. With its streamlined workflow, STRAP ensures that all necessary requirements for effective project analysis and design are met. It features an intuitive node definition process that allows users to work with either a Cartesian or cylindrical coordinate system, enhancing user experience and efficiency. Ultimately, STRAP is designed to support engineers in delivering top-quality structural solutions across diverse applications.

PLAXIS 3D encompasses crucial features necessary for conducting routine deformation and safety assessments related to soil and rock. This all-encompassing software facilitates the design and evaluation of soils, rocks, and their associated structures, enabling straightforward full 3D modeling. Users can efficiently create and adjust construction sequences for excavation projects. Additionally, it supports the calculation of steady-state groundwater flow, taking into account flow-related material parameters, boundary conditions, drainage systems, and wells. The software allows for the incorporation of interfaces and embedded pile elements to accurately simulate interactions between soil and foundation, addressing issues like slipping and gapping. With robust soil models and an extensive array of visualization tools, users can achieve reliable results. To tackle the specific geotechnical issues presented by soil-structure interactions, PLAXIS 3D provides various calculation methods, including plasticity, consolidation, and safety analysis, ensuring comprehensive coverage of user needs. Ultimately, this versatility makes it an indispensable tool for engineers in the field.

ProtaSteel empowers structural engineers and detailers to swiftly automate the design of steel connections, generating high-quality steel detail drawings within minutes. By importing models created in ProtaStructure directly into ProtaSteel, users can save countless hours through the automated design of a diverse selection of bolted and welded steel connections tailored to their needs. It offers a 3D visualization tool that facilitates the coordination of models, allows for the addition of auxiliary steelwork, and enables thorough quantification and value engineering of projects. The software dramatically cuts down on both design and detailing time by automatically generating exceptional engineering drawings for all steelwork and connection specifics. Not only does this enhance the productivity of design teams, but it also boosts the profitability of business projects. Additionally, ProtaSteel simplifies project management by ensuring seamless coordination with other prominent BIM platforms such as Tekla Structures and Revit, fostering a more integrated workflow. In this way, engineers can focus more on creative problem-solving and innovation within their projects.