Did you remember to factor the cost of life in?
No, only the gut feeling that 1e-7 per year is a very low risk compared to e.g. the risk of getting killed in traffic (1e-4 per year). What I read is that F3 tornadoes can usually be survived by staying in an interior room; for F4 and F5 you need an underground shelter or reinforced room. The question is more whether it makes sense financially to build the entire house tornado-resistant or even spend $10,000 on a storm shelter.
telling them that those lives are only worth as much as the insurance.
It is cold, but the value of life is estimated to be around 7 M$, based on how much people want to be paid to take risks, and on what (government) measures to prevent loss of life cost. Based on that, a measure that increases the survival probability for an F4/F5 tornado would be allowed to cost about $1 per person per year.
Disclosure: Tornadoes don't affect me as I live in Netherlands. I should be more worried about flooding...
People who decided not to live in plywood boxes in tornado country, or in wildfire area or below the sea level between a lake and the sea, or below the river level etc should not be asked to shoulder the burden
For hurricanes and floodings, which could devastate large areas in a single event, I see your point. However, a single tornado usually impacts only a small area. The probability of an individual house in Tornado Alley being struck by an F4 or F5 tornado seems to be 10^(-7) per year. Economically, it makes more sense to insure the risk than to build an F4-tornado-proof house. I couldn't find probabilities for F3 tornadoes, but I could imagine that a similar argument holds there.
"one of the more popular ways to generate ANFO is to pump a hole full of chicken shit and then pour in fuel oil"
What are you smoking? ANFO is ammonium nitrate with 6% fuel oil added. Bird droppings don't contain any significant amount of AN.
If a Pharma company invented any of them today there is no way they'd even be allowed for use with a prescription, let alone stocked in 500-count bottles
Here in Netherlands, they are not allowed to be sold in greater quantities than 20 pills, just to reduce the perception that they are harmless. The strange thing with paracetamol toxicity is that it would be trivial to add a harmless antidote against overdosing to the pills, but this isn't done despite the fact that paracetamol poisoning is the most common type overdose of pharmaceutical products.
"300 Mev photons are high-power gamma rays, not x-rays."
No, an accelerator of 300 MeV per meter over 3 mm gives you 1 MeV, or less if the actual field is over less than the chip size. Tuning down from there will easily get you into the x ray domain.
You seem to be stating that if I accidentally took 3 paracetamol pills,
See https://en.wikipedia.org/wiki/Paracetamol_toxicity . Short version: maximum recommended intake is 3 grams per 24 hours; a single dose of 10 g can be fatal, as are a few days in a row at 10 g per day spread out over multiple smaller doses.
if you put one layer on top of the other, even transparently, I am not sure.
Ink on paper works like this: the paper acts as a diffuse reflector; the ink absorbs light for certain wavelengths, but the light that is not absorbed passes through without changing direction. Putting two layers of ink with different absorption wavelengths on top of each other will result in only the wavelengths that are *not* absorbed by either being reflected by the paper. This is the whole point of the CMY(K) printing process.
Maybe you are thinking of paint, which typically includes its own reflective particles. But paint needs to be applied in a much thicker layer (0.1 mm or 4/1000 inch) to do its job, so it would be rather noticeable; the deck of cards would be 5 mm (1/4 inch) thicker and you would be able to feel the paint with your fingertips.
But if you collecting acoustic data over a period of time, transient sounds (noise) average out, and the loud peak (gunshot)
Well yeah, if you want to pinpoint the source of a massive transient or the source of an annoying continuous whistling sound or a never-ending repeated playback of some secret message, this sensor could work. But it would not be very useful for recording private conversations.
But look at it from this side: a normal microphone measures pressure as a function of time, i.e. p(t). If their is only one source of sound, you can reconstruct the sound wave at the source. If there are two sources, it becomes impossible to distinguish. This transducer will generate three signals: vx(t), vy(t), and vz(t). If you have three sources of sound, then you could, with proper tuning and calibration, disentangle the signal and reconstruct the output of each of the sources individually. As soon as there are more than three sources, say in a pub with 20 conversations going on at the same time, you cannot do this anymore simply because there are more bits of data being transmitted than being transduced; you would need to solve a system of three equations with twenty unknowns.
... a well chosen filter can indeed make two light bundles look different that look exactly the same without the filter.
Yes, that's what makes the skin look weird under cheap white LED lights and older fluorescent tubes. This effect is called metamerism.
But unless you print the entire back sides of the playing cards with a pattern of two different inks that look the same under the casino lights but look different through your filter, you cannot use this to label cards after the fact. Ink absorbs light, so when applied to white paper, the surface will look darker than before, no matter what.
...IR detector card has a strip of chemicals on it that glow pink when a remote control is aimed at it.
That is not frequency doubling, but a special form of phosphorence. Visible/blue light is used to generate long-lived excitations in the molecules. Infrared then excites them further to a slightly higher level with a short excitation lifetime; as that excitation decays, it emits visible light. It shares the disadvantages of common phosphorence: it is not directional.
For the naked eye, the ink would appear as a very pale cyan color. With a proper filter, everything would look very dark due to the filter removing 99% of the visible light, but the ink would show up with much more contrast. Effective long-pass filters do exist, e.g. Schott RG695 or RG715 for a 695 or 715 nm cut-off, respectively. There are plenty of suitable dyes. Probably you would want to have this filter only on one eye, otherwise the world around you might appear very dark.
The other theories that have been posted here make no sense.
Frequency-doubling needs extremely high intensities (like a high-power or focused low-power laser beam), which would render you blind. Moreeover, frequency-doubling requires proper phase matching, which boils down to the requirement of an exact combination of angle and wavelength.
Polarizers: it is not possible to turn unpolarized light into polarized light without throwing away half of the light. Once the light is polarized, the polarization direction can be manipulated with optically active materials, though.
A high-refractive index coating would not only change at the Brewster angle, it would make the cards much more glossy as seen from any angle. It is not possible to make the refractive index change dramatically within a short wavelength range without changing the absorption as well, so the glossiness would appear in visible light as well.
A phosphor coating would not work for several reasons: phosphors do not emit the phosphorence in the same direction as the absorbed radiation; they always convert from short wavelengths to long wavelengths, and the phosphorence light would be completely out of focus.
i think they meant by actual time used
Actually I think the slashdot editors deliberately make the poll questions a bit ambiguous. That way, you get more discussion.
The shortest distance between two points is under construction. -- Noelie Alito