Comment Whole lotta bullshit involved. (Score 1) 367
Ok, the guy has what they consider a 80% lower, meaning that 80% of the lower receiver of the gun is already milled. You can buy these on the internet and not need a FFL to purchase one since it's not a completed lower (has no trigger area, no area for the clip to go in, and a couple different pins and mechanics holes that are needed) I can get one forged and partly machined for a lot cheaper plus less time consuming and I wouldn't have to finish the outside of it. I would need the jigs to machine it properly and I for one would not trust doing it with hand tools or the machine shown because I wouldn't trust the accuracy and would fear catastrophic failure. You can clearly see it only a 2 axis machine. It would take more then some battery power to machine a block of aluminum in that. You'd have to do at least 3 setups of the stock. That battery would die after the first half of machining. The guys in the video seem to think people are idiots and no one knows about machining
But let assume you have a lower. Fine, but you need all the rest of the parts that make up the gun. The upper that includes the barrel, the bolt, the charging handle, on and on which you are not machining or even consider making on your own. Then you have to put it together, which by it's own is not the easiest thing, but parts a lot of times need gunsmithing to get them to fit properly. So there are tools for both the assembly AND working on parts fitment. That only is going to scare off 90% or more of people in even trying to build one. Add the cost (80% lower that's decent about 90 buck, upper kit that decent at least 500 if luck to find, the jigs 100+ dollars, tools to put it together properly 100+ to 200, time to do it all and the equipment which the "ghost gunner cnc" doesn't even tell you a price, just $250 NRD to "reserve" a spot to get one) and you pretty much eliminate it down to a select few that would enjoy this as a hobby. Oh, and you can legally only make them for yourself. Can't sell them either unless you get a manufacturers license, and nobody with a rickety l
But let assume you have a lower. Fine, but you need all the rest of the parts that make up the gun. The upper that includes the barrel, the bolt, the charging handle, on and on which you are not machining or even consider making on your own. Then you have to put it together, which by it's own is not the easiest thing, but parts a lot of times need gunsmithing to get them to fit properly. So there are tools for both the assembly AND working on parts fitment. That only is going to scare off 90% or more of people in even trying to build one. Add the cost (80% lower that's decent about 90 buck, upper kit that decent at least 500 if luck to find, the jigs 100+ dollars, tools to put it together properly 100+ to 200, time to do it all and the equipment which the "ghost gunner cnc" doesn't even tell you a price, just $250 NRD to "reserve" a spot to get one) and you pretty much eliminate it down to a select few that would enjoy this as a hobby. Oh, and you can legally only make them for yourself. Can't sell them either unless you get a manufacturers license, and nobody with a rickety l