63153281
submission
Lucas123 writes:
The Alliance of Artists and Recording Companies is suing Ford and General Motors for millions of dollars over alleged copyrights infringement violations because their vehicles' CD-Rs can rip music to infotainment center hard drives. The AARC claims in its filing that the CD-R's ability to copy music violates the Audio Home Recording Act of 1992. The Act protects against distributing digital audio recording devices whose primary purpose is to rip copyrighted material. For example, Ford's owner's manual explains, "Your mobile media navigation system has a Jukebox which allows you to save desired tracks or CDs to the hard drive for later access. The hard drive can store up to 10GB (164 hours; approximately 2,472 tracks) of music." The AARC wants $2,500 for each digital audio recording device installed in a vehicle, the amount it says should have been paid in royalties.
62701727
submission
Lucas123 writes:
The number of jobs in the solar power industry now outnumbers those in the coal mining industry.. That's good news for renewable energy proponents, but investments in new solar technologies that could increase efficiency and spur sustainable growth is down — way down. Investors simply see R&D as too risky because of past start-up failures and because the price of current solar cells continue to drop precipitously because China has flooded the market, meaning there's less profit to be made in the technology. The only thing driving jobs now appears to be new, relatively inefficient solar power plants. The total global investment in renewable power (excluding large hydroelectric projects) fell for the second year in a row in 2013, reaching $214 billion worldwide — 14% lower than in 2012 and 23% below 2011 levels, when there was a record high in renewable energy investments
62193443
submission
Lucas123 writes:
A DARPA-funded project has successfully developed a .50 caliber sniper round capable of maneuvering during flight in order to remain on target. The self-guiding EXACTO bullet, as it's being called, is optically guided by a laser that must remain on target for the bullet to track. The EXACTO round is capable of accurately tracking a target up to 1.2 miles away, DARPA stated. The technology, which is being developed by Teledyne Scientific and Imaging, is targeted at helping snipers remain at longer distances from targets as well as improving night shots. While DARPA's tracking bullet is the first to use a standard, small-arms caliber round, in 2012 Sandia National Laboratories (SNL) successfully demonstrated a prototype self-guided bullet that was more like like a four-inch dart.
61781857
submission
Lucas123 writes:
A company in China has used additive manufacturing to print 10 single-room buildings out of recycled construction materials in under a day as offices for a Shanghai industrial park. The cost: about $5,000 each. The company, Suzhou-based Yingchuang New Materials, used four massive 3D printers supplied by the WinSun Decoration Design Engineering Co. Each printer is 20 feet tall, 33 feet wide and 132 feet long. Like their desktop counterparts, the construction-grade 3D printers use fused deposition modeling (FDM), where instead of thermoplastics layer after layer of cement is deposited atop one another. The cement contains hardeners that make each layer firm enough for the next. Yingchuang's technique builds structures off site in a factory one wall at a time. The structures are then assembled onsite. The technique is unlike U.S.-based Contour Crafting, a company whose 3D printing technology to form the entire outer structure of buildings at once, The Yingchuang factory and research center, a 33,000 square foot building, was also constructed using the 3D printing manufacturing technique. It only took one month to construct.
61739907
submission
Lucas123 writes:
A new report authored by several environmental groups say data shows more than half of Fortune 100 companies collectively saved more than $1.1B annually by reducing carbon emissions and rolling out renewable energy projects. According to the report, 43% of Fortune 500 companies, or 215 in all, have also set targets in one of three categories: greenhouse gas reduction, energy efficiency and renewable energy. When narrowed to just the Fortune 100, 60% of the companies have set the same clean energy goals. Some of the companies leading the industry in annual clean energy savings include UPS ($200M), Cisco ($151M), PepsiCo ($121M) and United Continental ($104M).
61339919
submission
Lucas123 writes:
Katherine, a 14-foot, 2,300lbs. Great White Shark has become so popular with visitors to a research site tracking her daily movements that the site's servers have crashed and remained down for hours. The shark, one of dozens tagged for research by the non-profit global shark tracking project OCEARCH, typically cruises very close to shore up and down the Eastern Seaboard. That has attracted a lot interest from the swimming public. Currently, however, she's heading from Florida's west coast toward Texas. OCEARCH tags sharks with four different technologies to create a three-dimensional image of a shark's activities. On average, we're collecting 100 data points every second — 8.5 million data points per day.
61132239
submission
Lucas123 writes:
Starbucks today announced that after beta-testing wireless charging in several locations, it will roll it out to all of its cafes in the U.S. Unfortunately, the Powermat wireless chargers they chose to use doesn't support the overwhelming number of mobile devices that are enabled for wireless charging using the Qi standard. Of the 20 million consumer devices estimated to have shipped in 2013 with wireless charging capabilities, nearly all were built with the Qi specification, according to IHS. The majority of the Qi technology was built into devices such as the Google Nexus 4 and 5 smartphones, Google's Nexus 7 second-generation tablet and a number of models in Nokia's Lumia smart phone range. The battle between the three wireless charging consortiums is expected to continue to adversely impact adoption of the technology.
61055327
submission
Lucas123 writes:
In a company where 220 IT jobs have been lost to offshore outsourcing over the last year, one IT worker recounts what it was like to actually train the H-1B worker who replaced him. "I think once we learned about it, we became angrier toward the U.S. government than we were with the people that were over here from India... because the government is allowing this," said the worker in an interview with Computerworld. The employee, whose real name was not used, said the IT workers at his firm first learned of the offshore outsourcing threat through rumors. Later, the IT staff was called into an auditorium and heard directly from the CIO about the plan to replace them, but the process still took months after that. Many younger IT workers found jobs and left. Mainframe workers were apparently in demand and also able to find new jobs. But older workers with skills in open systems, storage and SAN faced a harder time.
60922527
submission
Lucas123 writes:
Scientists developing smart robotic prosthetics say the lines between robots and humans is beginning to blur and that someday soon people will be able to improve their body. For example, Robotic prosthetics, using a built-in computer, 100 sensors and 17 motors can take natural cues from a user's residual limb, giving him or her the dexterity and grace to play a piano. Robotic exoskeletons have helped people suffering from paralysis walk again and the U.S. military is just weeks away from testing a new exoskeleton, or Iron Man-like suit. And, more than six years ago, a University of Arizona researcher who had successfully connected a moth's brain to a robot predicted that by 2022 we'll be using "hybrid" computers that run a combination of technology and living organic tissue. "By utilizing technology, you're able to improve your body beyond anything you could do in the past," said Daniel Wilson, an engineer with degrees in machine learning and robotics from Carnegie Mellon University.
60917211
submission
Lucas123 writes:
A study released at the Telematics Detroit 2014 conference revealed the obvious: Most people don't want more distracting embedded apps in their cars; they just want essential apps like navigation and music to be intuitive to use and reliable. Part of the study involved a focus group of 46 people who were asked to evaluate infotainment systems from three luxury car makers and four "mass consumer" car makers. The drivers were asked to do three things: Navigate home, find a pizza shop and find a radio station. Only 40% were able to complete all three tasks. Not surprisingly, the highest rated infotainment system was Tesla because its icons were "large" and it was easy to figure out.
60842757
submission
Lucas123 writes:
Ford has been using 3D printing for rapid prototyping since the mid-1980s, but in recent years it has ramped up its efforts adding new machines and materials. A tour of the facility revealed shows four different methods of 3D printing being used to prototype parts. For example, Ford uses Nylon 11 and laser sintering to make parts that can be retrofitted to working vehicles and tested over thousands of miles. The center also binder jet printing to form molds for metal prototypes by laying down layers of sand that are then epoxied together. Just one of its five 3D prototyping centers churns out more than 20,000 parts a year. Today, Ford could not meet new vehicle deadlines without 3D printing.
60772865
submission
Lucas123 writes:
Cody Wilson, the 26-year-old former law school student who published plans for printing 3D guns online, disputed claims by universities and government agencies that his thermoplastic gun design is unsafe. Wilson claims the agencies that tested the guns did not build them to spec. In a Q&A with Computerworld, he also addressed why he's continuing to press regulatory agencies to allow him to offer the plans again for upload after being ordered to take them down, saying it's less about the Second Amendment and more about the implications of open source and the digital age. "If you want to talk about rights, what does it mean to respect a civil liberty or civil right? Well, it means you understand there are social costs in having that right; that's why it deserves protection in the first place," he said. Wilson is also planning to release other gun-related project, though not necessarily a CAD design.
60662253
submission
Lucas123 writes:
It appears an Idaho-based company that created prototype panels for constructing roads that (among other features) gather solar power, will be going into production after it exceeded it's crowdfunding goal of $1M. With two days left to go, Solar Roadways' Indiegogo project has already exceeded $1.6 million. The hexagonal-shaped solar panels consist of four layers, including photovoltaic cells, LED lights, an electronic support structure (circuit board) and a base layer made of recyclable materials. The panels plug together to form circuits that can then use LED lights to create any number of traffic patterns, as well as issue lighted warnings for drivers. The panels also have the ability to melt snow and ice. Along with the crowdfunding money, Solar Roadways received federal grant money for development.
60628921
submission
Lucas123 writes:
Currently, the hottest trend from TV manufacturers is to offer curved panels, but analysts say it's nothing more than a ploy to pander to consumers who want the latest, coolest-looking tech in their home. In the end, the TVs don't offer better picture quality. In fact, they offer a degraded view to anyone sitting off center. Samsung and LG claim that the curve provides a cinema-like experience by offering a more balanced and uniform view so that the edges of the set don't appear further away than the middle. Paul Gray, director of European TV Research for DisplaySearch, said those claims are nothing by pseudo-science. "Curved screens are a gimmick, much along the same lines as 3D TVs are," said Paul O'Donovan, Gartner's principal analyst for consumer electronics research.
60316463
submission
Lucas123 writes:
After using Google Glass for several weeks, Computerworld columnist Matt Lake had plenty of reasons to explain why he returned them, not the least of which was that they made him cross-eyed and avoid eye contact. Google Glass batteries also drain like a bath tub when using either audio or video apps and they run warm. And, as cool as being able to take videos and photos with the glasses may be, those shots are always at an angle. Of course, being able to do turn-by-turn directions is cool, but not something you can do without your smart phone's cellular data or a mobile hotspot. The list of reasons goes on... Bottom line, if Google Glass is in the vanguard of a future class of wearable computers, the future isn't the present.
