Can you buy basic necessities? Food, water, shelter?
Yes, as a matter of fact you can
... virtually zero value from an investment standpoint if they can't convert to revenue
Like say for instance, Facebook, or Instagram.
How long until the first support call because some tool tries a regular network (or hell, even phone...) cable?
It's supposed to work with normal Cat-5e/6 network cable. However the likelihood of Joe Sixpack plugging their HDBaseT into the ethernet port of their computer/switch/modem and frying it with the 100W power going over it is pretty high.
If you are in the intersection when the light is red the you have run the light. It's really very simple!
There's two rules, and they vary depending on where you live. There's Permissive Yellow, where you're legal if you entered the intersection before the light changed to red, and then there's Restrictive Yellow where you're considered to have run the red light if it changes to red while you're still in the intersection. In the US most, but not all, states are Permissive Yellow.
they are talking about brakes strong enough to hold the car in place if you have your feet planted on both the accelerator AND the brake at the same time.
Yes. And I'm saying that any car that can't do this is not roadworthy and needs to see a mechanic immediately. Brake systems of basically any modern car are strong enough to do that if properly maintained. Sure, it'll possibly kill the engine and the transmission, but the car won't move.
Only because the traction control system of a car with enough power to break traction on acceleration is preventing it from doing so. '70's muscle cars could overcome their rear brakes just fine, and yet when you stomped on the brakes they'd lock up those same rears just fine too. The modern equivalents can do it too if you turn off/disable the traction control.
Uhhhh... I believe you fail at basic physics. If you can plonk both feet on the pedals and not accelerate, then the breaks can excerpt more force than the engine can (otherwise you'd be accelerating). Given that force equals mass times acceleration, breaks that can excerpt more force than your accelerator will obviously decelerate you faster than your accelerator will accelerate you.
Physics fail yourself. You're forgetting that acceleration is traction and drag limited, while deceleration is traction limited with drag helping you slow down. There's plenty of cars that in the absence of traction control will quite happily spin the drive wheels and produce lots of smoke when you press the gas. There's also plenty of cars (pretty much all) that in the absence of ABS will quite happily lock up the wheels while moving and produce lots of smoke when you press the brakes. The force required to lock up the wheels isn't necessarily more than the engine can produce, it is however all the force required to stop the car if the engine wasn't outputting maximum power.
The brake booster for power brakes has a check valve to keep existing vacuum within the booster even if the engine's wide open or off. There should be enough vacuum to apply the brakes two or three times before the vacuum runs out. Try getting in your car and (without starting the engine) apply the brakes a few times. You should feel them get "hard" after a few times when the vacuum assist is depleted.
And even after that they will still work, you're just now hydraulically linked from pedal to brake pistons.
Turning off the engine I can understand - you lose your power steering and brakes, but neutral is an important safety feature. Are there really cars out there you can't put into neutral???
Except that steering and brakes don't stop working when the engine is off, however you do not have hydraulic boosts to either and no ABS. So yeah, you have to press harder on the pedal and it takes more force to steer, but both still work and shouldn't be a reason for not allowing you to turn off the engine.
The problem isn't anything to do with the breaks not being powerful enough. The issue is that they don't engage at all.
There seems to be a problem with the drive-by-wire computer system where it forces the accelerator on full and stops accepting other input, including the breaks. Pressing the pedal does nothing. It appears you cannot do any of the other obvious things like changing gear to neutral* or turning the engine off.
*Presumably only in automatic cars, manual ones mostly still use mechanical gear shifts.
I'm fairly certain, that in the US at least, that safety regulations require that brake pedal->brakes and steering wheel->wheels must still work even if the engine is turned off and there are no electrics working either.
96khz is major overkill. Find out for yourself, get a tone generator and I can almost guarantee you won't be able to hear 32khz, much less 96. The only reason I know this is because I've done it myself, curious about the whole 32/96 audio thing. Even with a brand new high quality record and a fully capable recording chain I've never seen frequencies much higher than 32khz (even though practically nobody could hear it anyway), in fact they often have considerably worse frequency response than digital audio. By extension, dvd-audio and SACD are a scam (as with most audiophile garbage).
That would be true if you never intended to do anything with the recording other than play it back at exactly the same rate it was recorded. Is it better to have the sampled data at the point you're resampling, or to guess what might have been there from interpolation?
The entire domestic recorded music market is worth less than 14 billion (that's revenue btw, not profit).
So that means the thousands of artists got to split about twenty bucks, right?
According to that article heterogeneous multi-adapter will work in Vista/W7 if you use XPDM drivers instead of WDDM drivers.
At least that's my understanding of this:
A user could force the installation of a XPDM driver for each of these devices, and therefore get heterogeneous multi-adapter multi-monitor to work as in Windows XP.
And when you do that you won't be able to play DVDs or BluRay or other DRM'd video, either at all or only at reduced resolution, DX10/11 will no longer be available, and depending on your monitor it might stop working because HDCP isn't on. In other words, using XPDM is *not* a viable option.
Hackers of the world, unite!