10 A$ = "DON'T TOUCH ME! "
20 M$ = A$ + A$ + A$ + A$
30 PS = 1
40 PRINT MID$(M$,PS,39);
50 PS = PS + 4: IF PS > LEN(A$) THEN PS = PS - LEN(A$)
60 IF PEEK(-16384) < 128 THEN GOTO 40
70 HOME
80 FOR I = 1 TO 1000:NEXT
90 HTAB 10:VTAB 12
100 PRINT "I SAID ";
110 FOR I = 1 TO 1000:NEXT
120 PRINT "DON'T ";
130 FOR I = 1 TO 2000:NEXT
140 PRINT "TOUCH ";
150 FOR I = 1 TO 2000:NEXT
160 PRINT "ME!"
170 FOR I = 1 TO 3000:NEXT
180 HOME
190 POKE -16368,0
200 GOTO 30
I ran it and it works!
Following in the footsteps of a failing company...
I am not a movie pirate and I have never seen this movie, but this bullshit makes me not want to see it. Fuck the Hurt Locker.
In addition to the OPs, my recommendations (please excuse overlap) speaking from experience:
- A fast computer with a good widescreen monitor. Why? Much electronics work is done the computer, from circuit design, PCB design and microcontroller emulation
- If expense is no object, get a high-end electronics design package like Altium (only one that comes to mind, sorry). I use Proteus from Labcenter as it does the most excellent circuit and microcontoller emulation and is much better value for money
- Software for developing micrcontoller code
- CAD software like Solidworks or Autodesk Inventor for enclosure design
- 3D printer for printing enclosures
- microcontroller programming/debugging devices (e.g. MPLAB Real ICE) and headers
- a high-end mixed-signal oscilloscope (e.g. Tektronix MSO5000)
- a shitstorm of various voltage and current probes
- a good benchtop multimeter, e.g. Agillent 34411A
- a good digital soldering station (e.g. Weller) with multiple soldering irons of various power/sizes
- a good hot air rework station (e.g. Weller WPA3000)
- a hotplate
- *** IMPORTANT *** Fume extraction Don't solder without it
- a good desoldering station
- *** IMPORTANT *** a good stereomicroscope for surface-mount assembly (e.g. Nikon SMZ series)
- good digial benchtop power supplies (analog units can be bumped sending voltages flying; been there, done that)
- a good LCR meter (e.g. Fluke, Hameg)
- If you a doing power supply design, an "electronic load" (TTi)
- Again, if doing power supply design or mains voltage stuff, an AC power source/analyzer (e.g. Agilent); supplies worldwide voltages at various frequencies
- a good signal generator (any)
- an "electronics safe" vacuum for cleaning your bench, £M make one for printer repair which works well
- As I "hate" working from a bench, I recommend a strong and long desk (e.g. 1.8 -2m in length); Check out Herman Miller Abak
- A good chair, e.g. Herman Miller Aeron
- breadboards
- component "engineering kits" (e.g. assortments of resistors, caps, etc... both surface mount and radial/axial in a nice binder) so you always hav ethe exact component on hand
- tools: good screwdrivers, wire cutters, wire strippers, etc... heck, could go on regarding tools, but will stop...
*****
Good luck...
Do you keep in touch with Chuck Peddle?
The icon that fucks me off the most is the one for the iOS Maps application. The US interstate route sign in the icon (ie route 280) makes absolutely no sense to anyone young or old outside of the United States. A globe or something similar would make more sense....
"May your future be limited only by your dreams." -- Christa McAuliffe