Get FreeDOS image http://www.finnix.org/files/balder10.img
and the utility http://support.wdc.com/product/download.asp?groupid=609&sid=113&lang=en
Add to the
menuentry "FreeDOS (WesternDigital Idle3 tool)" {
insmod ext2
set root=(hd6,1)
search --no-floppy --fs-uuid --set PUT_HERE_UUID_OF_YOUR_DRIVE
linux16
insmod ext2
set root=(hd6,1)
search --no-floppy --fs-uuid --set PUT_HERE_UUID_OF_YOUR_DRIVE
initrd16
}
Get this part from
set root=(hd6,1)
search --no-floppy --fs-uuid --set PUT_HERE_UUID_OF_YOUR_DRIVE
Create FAT partition with Disc Utility from Gnome and formate with mkfs.vfat (fat32)
Reboot into the mode 3 in FreeDOS (wait until system asks you, it can take a few seconds) and with C: you will get to the utility.
Disabling of the timer
It was not easy to find a eSATA PCIe card that is reported as compartible with Ubuntu Intrepid LInux. DeLock Nr 89143 with the chipset JMB363 JMicron 20360/20363 AHCI Controller (rev 03) works just fine out of the box. Just do not forget to configure the jumpers on the card to be able to use external eSATA ports. Also make sure you unmount the discs before disconnecting them. Otherwise you will have to run fsck in the best case.
http://forum.ubuntu.ru/index.php?topic=38209.msg389504#msg389504
download tar.gz, extract it and then sudo dpkg --install
Starting from KDE4.3
DISPLAY=:0
To map that to a shortcut go to System Settings, Input Actions, add a shortcut and put into the Comand/URL:/usr/lib/kde4/libexec/krunner_lock --forcelock >/dev/null 2>&1 &
VFAT http://aidememoir.wordpress.com/2008/07/01/change-fat32-drive-label-under-ubuntu-linux//
NTFS
sudo ntfslabel
/dev/sdi1 MaxtorGray300MB
JFS
sudo jfs_tune -l
/dev/md0
sudo umount/media/RAID/
sudo jfs_tune -L RAID/dev/md0
/usr/share/initramfs-tools/init
# to stop a race condition with md
157 maybe_break mount
158 sleep 5
159 log_begin_msg "Mounting root file system..."
sudo
/usr/sbin/update-initramfs -uk all
# run to rebuild the image
Make sure if you add it it is to the "mount" line. The line numbers are likely different with your system. You might start with 10 instead of 5, seconds delay.
Ubuntu Forum Discussion
known bug in Intrepid has no influence on the creation of the array.
to check the SMART status of the drives do this
for letter in a b c d e f; do echo "############## Below the information for the drive
/dev/sd$letter ##########" && sudo smartctl -H -l error /dev/sd$letter ; done
add internal bitmap to reduce rebuild time
sudo mdadm --grow --bitmap=internal
/dev/md0
better still add external bitmap to speed up the write speed to compared to internal bitmap
sudo mdadm --grow --bitmap=none
/dev/md0 #remove bitmap sudo mdadm -G /dev/md0 -b /media/persistent_temp/md0_intent_var # my /var is mounted into ramdisk
add to
echo 8192 >
/sys/block/md0/md/stripe_cache_size
check drive features
for letter in a b c d e ; do echo "Drive
/dev/sd$letter" && sudo hdparm -i /dev/sd$letter ; done
Turn of APM and spin down. Set sound management to "fast". APM is not supported on my WD drives.
for letter in a b c d e ; do echo "Drive
/dev/sd$letter" && sudo hdparm -B255 -S0 -M254 /dev/sd$letter ; done
Recover sequence
sudo mdadm --assemble --force
/dev/md0 --uuid=YOUR_UUID /dev/sd{a,b,c,d,e}1
sudo mdadm --query --detail/dev/md0
sudo fsck.jfs -v/dev/md0
sudo mount/dev/md0
sudo watch cat/proc/mdstat
sudo mdadm/dev/md0 --add /dev/DEVICE_TO_ADD
add
pointer = 1 2 3 4 5 8 9 6 7
to
mouse has only 7 buttons, but in Xwindows and Mozilla 3.x 8 and 9 are responcible for the back and forward browser history events.
as root apt-key adv --recv-keys --keyserver keyserver.ubuntu.com YOUR_KEY
I had to tweak the ~/.Xmodemap again. (is accessed by script in ~/.kde/Autorun)
Use this command to get the keycodes from the multimedia keys.
xev | grep -A2 --line-buffered '^KeyRelease' | sed -n '/keycode
/s/^.*keycode \([0-9]*\).* (.*, \(.*\)).*$/\1 \2/p'
my Xmodmap
keycode 121 = XF86AudioMute
keycode 122 = XF86AudioLowerVolume
keycode 123 = XF86AudioRaiseVolume
keycode 142 = XF86Away
keycode 163 = XF86Mail
keycode 165 = XF86AudioPrev
keycode 166 = XF86AudioStop
keycode 171 = XF86AudioNext
keycode 172 = XF86AudioPlay
keycode 217 = XF86Search
Generally to map shortcuts one can use the KDE Settings "Input Actions" and just add new Hotkeys. I have used it for all keys except for Amarok.
Also Qt has explicitly refused to accept
keycode 150 = XF86Sleep
keycode 179 = XF86Tools
that have worked before in 8.04
"Hotkey" Action command
"Decrease Volume" qdbus org.kde.kmix
"Increase Volume" qdbus org.kde.kmix
"Start Dolphin"
Amarok has its own Settings->Configure Global Shortcuts menu.
Just drop all XF86... Shortcuts from "Configure Shortcuts" and put them into "Configure Global Shortcuts"
I have also deinstalled keytouch, keytouch-editor and lineakd, klineakconfig. They basically are responsible for the same thing and may have interferred with the settings, but I am not sure.
change here
HID2HCI_ENABLED=1
to
HID2HCI_ENABLED=0
It prevents resetting the dongle in to bluetooth mode, which does not work for this dongle anyways. This is this reset that disconnects the keyboard.
http://www.diyaudio.com/wiki/index.php?page=LINUX+Audio+MAudioTransit/
use hw:1,0 to configure xine or alsa
sudo blkid
Re: ElectricSheep, can't find xv, another process running, terminated
Hi. The best solution is to remove your current version of electricsheep:
Code:
sudo apt-get remove electricsheep
And then you can use this script and run
Code:
sudo sh install-electricsheep-package.sh
This will install a new version of electric sheep from a PPA on lauchpad.
Credits to spotspot:
http://ubuntuforums.org/showthread.php?t=826554
http://community.electricsheep.org/node/271
http://ubuntuforums.org/showthread.php?t=950771&highlight=electricsheep/
http://www.jwz.org/xscreensaver/man1.html
USING KDE
KDE also has invented their own screen saver framework instead of simply using xscreensaver. To replace the KDE screen saver with xscreensaver, do the following:
1: Turn off KDE's screen saver.
Open the ``Control Center'' and select the ``Appearance & Themes / Screensaver'' page. Un-check ``Start Automatically''.
2: Find your Autostart directory.
Open the ``System Administration -> Paths'' page, and see what your ``Autostart path'' is set to: it will probably be ~/.kde/Autostart/ or something similar.
3: Make xscreensaver be an Autostart program.
Create a
[Desktop Entry]
Exec=xscreensaver
Name=XScreenSaver
Type=Application
X-KDE-StartupNotify=false
4: Make the various "lock session" buttons call xscreensaver.
Replace the file kdesktop_lock or krunner_lock in
#!/bin/sh
xscreensaver-command -lock
Make sure the file is executable (chmod a+x).
Now use xscreensaver normally, controlling it via the usual xscreensaver-demo (1) and xscreensaver-command (1) mechanisms.
Hackers of the world, unite!