It should have been used on the computer before submitting this article.

Disappointing,

myke

Hi Timothy,

Unfortunately, you didn't provide a lot of information in your post as to what the problems are.

As people have pointed out, there are a ton of USB to Serial solutions out there so having the modern hardware with the ability to communicate over RS-232 is generally not a problem (although, depending on the connections used, you might want to invest in a RS-232 breakout box and read up on RS-232 handshaking as many of the older devices do use hardware handshaking). I have a few hand wired 9 pin to 25 pin connectors with the CTS-RTS and DSR-DTR pins shorted together as they can simplify your life immeasurably.

In my experience, the biggest problem is retaining floppies & CDs with the original software on them (assuming that the developers are no longer supporting the product/are out of business). If the company is still in business, usually they're pretty good at providing updated software for their products. If they're not in business, then look to see if they were bought out by anybody. Chances are you'll find that the purchaser is still supporting the product, although it may be under another name.

Personally, the biggest issue that I see when I have encountered this type of situation is that the original programs are on floppies. If this is the case, you will need to find somebody with a Windows/95 machine that they're keeping together with spit, bailing wire, gaffer's tape and good intentions - you should be able to copy the program onto a USB key and then burn it on a CD/DVD for more permanent storage.

Once you have the program in a media that you can work with, you may have problems with the installation. You will probably have to create a virtual machine on your PC AND there may be 16 bit programs that you have to convert to 32 bit - here's a great resource that's saved me a couple of times: http://www.reactos.org/forum/viewtopic.php?f=22&t=10988

Finally, Google is your friend. Chances are the answers are out there for your particular equipment.

Good luck!

myke

Other than that?

I imagine it has some scientific value for showing how well a highly trained and experienced individual goes through a stressful situation, but other than that?

myke

Wouldn't the best answer for an individual be based on their driving habits and history?

If you tended to stay at the speed limit (or reasonably above according to traffic), were a defensive driver and were reasonably confident that you wouldn't cause an accident, wouldn't you want tracking on to show that it's the other guys fault?

Depending on your hubris level, the next step is a dashboard camera because clearly you are never going to cause an accident - right?

myke

That sounds *really* interesting - anybody know where the rest of the population can get Windows 3.1 licenses?

I doubt that Microsoft would be willing to release it into the wild - so where can we find them?

myke

Jörg,

With the recent controversy regarding assault weapons in the US and the plans to reduce clip sizes, I'm wondering if you would think your, um, devices would be more dangerous if they could shoot multiple objects rather than just one at a time?

myke

Interesting question and one I've thought about for a bit since the original question, from the other side came out.

I would say, bring in the team lead as an arbitrator. It's their job to direct the work and (hopefully) develop team members - this guy sounds like he needs a bit of development and level setting.

myke

Very insightful.

Somebody with points please mod the parent up.

myke

When I was at RIM, we used a broken quick sort method that the candidate was asked to fix. We didn't time how long it took the candidate to implement the fix, but it generally required the candidate to do some research as to what was wrong. One of the team leads created a simple app that tested the performance (ie speed) of the fix.

What was really interesting to me was the number of candidates who refused to do the test (50-60%) because they said it was "beneath them". The big problem was, RIM's HR (OD) that insisted we interview the candidatest that refused to do the test because we were losing potentially half the candidates that were responding to the job applications (this was when RIM was The Place To Be).

The best candidates were the ones that did the test and asked if we had any more. These candidates also tended to produce code that ran sort the fastest.

myke

If I understand what was discovered in TFA (and press release noted by Trepidity), the etched scales reduce the internal reflections of the produced light which result in some of the produced light being lost in the structure of the LED and lens.

Does anybody know how much light is actually lost within the LED and lens? The article mentions that the extrated light is increased by 55% which implies that at least a third of the light produced by an LED is lost within the structure - would this be correct?

I would presume that this loss would be influenced by the shape of the LED lens - correct? I seem to remember that pin through hole LEDs are designed with the emitter at the focus of the curved lens to minimize reflected losses BUT this could be a huge advantage for SMT chip LEDs which tyically just have a flat surface for the lens.

Are there other applications in which this can be used as I would think that this could be useful in other applications? I would guess that adding the triangular "roof" structure would make it difficult to focus/direct the light produced by the LED. This would mean that the typical power dispersion patter of a typical LED would be evened out and the light output would be difficult to focus - correct?

myke

I think I can honestly say that I have had Thinkpads for 20 years and I have never had a bad experience on them (other than having a six year old system at one point that could run Cygwin but basically nothing else - the story about how I got the replacement made me a legend at work) - they have travelled literally around the world at least twice and have almost as many frequent flyer miles as I do.

They're great road warrior machines, well built, well thought out (their docking ports are worth every penny) and, amazingly enough, they're probably the only brand that didn't loose their quality when they were bought out/sold (I'm still pissed at what happened to Alienware).

Hopefully they'll keep a few of the old ones around so I can stock up before they try to emulate Apple.

myke

Disappointing because Elon Musk is doing more to make spaceflight exciting than probably anybody since the 1960s by being up front and centre about what he is doing. The Dragon 2 sounds quite interesting and I'm looking forward to seeing the evolving concept (especially in light of the experiments that SpaceX have been publicizing).

The Boeing entry, even though it is similar to SpaceX's just seems to be "corporate".

XCOR seems to be an (interesting) contender for sub-orbital while Scaled Composites & SS2 have kind of dropped off the radar and has been eclipsed by SpaceX showing that individuals can actually make it into space for real.

Nice to see progress and some renewed promise for space!

myke

"In your Face, Aldrin!"
"A quarter million miles, billions of dollars, and you won't believe what I just stepped in."
"What's that monolith doing here?"
"Man, you can't believe what a fart smells like in here."
"Houston, has Aldrin told you about his crotch rot yet?"
"Honey, I think I left the stove on."
"Houston, you're not going to believe this, but there's a flag with the Hammer and Sickle standing here."
"Man, I could use the fresh, relaxing taste of Coca-Cola."
"Suck it, Aldrin!"

myke

I would normally do that as well BUT that wasn't an option because the theraputic software only worked on Windows 95 and I could not find a set of CDs and a license I could use for that.

myke