Want to read Slashdot from your mobile device? Point it at m.slashdot.org and keep reading!

 


Forgot your password?
Close
typodupeerror
×
Politics

Video Lawrence Lessig Answers Your Questions About His Mayday PAC (Video) 148

Posted by Roblimo from the it's-the-next-best-thing-to-asking-him-live-and-in-person dept.
We've mentioned this interesting PAC more than once, including when Steve Wozniak endorsed it. The original Mayday PAC goal was to raise $1 million. Now Larry is working on a second -- and more ambitious -- goal: To raise $5 million by July 4. We called for your questions on June 23, and got a bunch of them. This time, instead of asking via email, we used Google Hangout to ask via video. Here's a quote from the Mayday website:'We are a crowdfunded Super PAC to end all Super PACs. Ironic? Yes. Embrace the irony. We’re kickstarting a Super PAC big enough to make it possible to win a Congress committed to fundamental reform by 2016. We set fundraising goals and then crowdfund those goals." Check the Mayday About page and you'll see that a whole bunch of Internet and coding luminaries are on board. You may also notice that they span the political spectrum; this is totally not a partisan effort. | Another quote from the website: "Wealthy funders are holding our democracy hostage. We want to pay the ransom and get it back." Is this an achievable goal? We'll never know if we don't try. | This is Part 1 of a 2-part video. (Alternate Video Link) Update: 07/02 23:42 GMT by T : Here's a link to part 2 of the video, too.
Technology

Video Automated Remote Charging for Your Flying Drones (Video) 30

Posted by Roblimo from the aerial-drones-as-automated-traffic-law-enforcers-are-(sadly)-inevitable dept.
The Skysense website says, 'Save time and manage your drone operations remotely: whenever the batteries run out, land on a Skysense Charging Pad and take off as soon as the batteries are recharged. Without ever leaving the office.' That certainly sounds convenient. Since it looks like everybody and her dog is jumping on the flying drone bandwagon, the next step is obviously charging the things without human intervention. We're talking about battery-powered ones, of course, like the multicopter drones that are starting to be used for things like pipeline inspection, mapmaking, and security alarm response. Sadly, using drones for beer delivery is currently against the law in the USA, as are the Burrito Bomber and the much-ballyhooed Amazon Prime Air drone delivery system. All this may change in the next few years as the FAA figures out how to regulate the many commercial drones that will inevitably be zipping through our skies, landing on pads to recharge themselves, and continuing their missions without human intervention. The next step in drone automation will probably be using driverless ground vehicles as drone launching and control stations. Shockingly, there aren't a dozen Kickstarter projects raising money to build automated ground support systems for automated flying drones already, but surely they'll show up before long. (Alternate Video Link)
Cloud

Video Sigsense is Making Interchangeable, Modular Sensors (Video) 21

Posted by Roblimo from the someday-will-we-be-as-interchangeable-as-our-tools? dept.
Their main claim: "Sigsense Sensors are field-switchable sensing modules which replace the current generation of single purpose instruments. All Sigsense Sensors connect to the Sigsense Wireless Dock through a common interface. This portability and convenience allows workers to always carry the right instrument for the job." In other words, a technician in a food manufacturing plant doesn't need to carry a humidity-measuring tool, a multimeter, a signal strength meter, and four or five other measuring tools, to the point where he's got a backpack full of instrumentation or a rolling a cart full of measuring devices. That technician can now (in theory) carry a single, wireless sensor body, and put the sensors he needs on it as easily as you change heads on an electric hair trimmer. Check their blurb on AngelList for more about what this company is up to, and note that they are going way beyond making one measurement at a time. They're talking about collecting instrument data, along with tracking technicians, and sending all this data to the cloud, where you can do with it as you wish. But not today. The website says they will have products available "soon." (Alternate Video Link)

Comment Re:Should the US government censor political blogs (Score 1) 308

by Roblimo (#47300485) Attached to: Interviews: Ask Lawrence Lessig About His Mayday PAC

The blogger presumably has had to build an audience by displaying some sort of insight that attracts people and keeps them reading his stuff. Or hers, depending.

In my world, that is better than a guy we'll call "Rick 'the thief' Scott" instead of using his real name, which is "Rick 'the thief' Scott," who spent $73 million to buy his way into the Florida governor's mansion.

"And how did he get all that money?" you ask.

"He was CEO of Hospital Corporation of America when they were ripping off Medicare for billions of dollars, and paid the largest fine in U.S. history," said the little red hen.
Medicine

Video Otherlab Working on a 'Fundamental Jump' in Technology for Exoskeletons (Video) 36

Posted by Roblimo from the was-it-a-man-or-was-it-a-robot? dept.
"Otherlab," says their projects page, "is a private Research and Development company with a number of core competencies. We welcome industrial partnerships and commercialization partners. We have worked with dozens of companies globally from small start-ups to multi-nationals and Fortune 500 businesses. We develop enabling new technologies through an emphasis on prototyping coupled to rigorous physics simulation and mathematical models. We develop our own design tools because it's lonely at the frontier and to create new things and ideas, you often have to create the tools to design them." | One of their projects is building low-cost, inflatable exoskeletons that can be used as prosthetics or -- one presumes -- as strength multipliers for people who have working limbs. This is the project today's interviewee, Tim Swift, is working on. (Alternate Video Link)
Biotech

Video Modular Science is Building Hardware and Software for Lab Automation (Video) 6

Posted by Roblimo from the biology-research-on-an-organic-shoestring dept.
Modular Science is something Tim Lord spotted at last month's O'Reilly Solid Conference in San Francisco. Its founder, Peter Sand, has a Ph.D. in Computer Science from MIT. He's scheduled to speak at this year's OSCON, and his speaker blurb for that conference says, "He is the founder of ManyLabs, a nonprofit focused on teaching math and science using sensors and simulations. Peter also founded Modular Science, a company working on hardware and software tools for science labs. He has given talks at Science Hack Day, Launch Edu, and multiple academic conferences, including SIGGRAPH." And now he's also been interviewed on Slashdot. Note that there are plenty of lab automation systems out there. Peter is working on one that is not only "an order of magnitude cheaper" than similar devices, but is also easy to modify and expand. It's the sort of system that would fit well not just in a college-level lab, but in a high school lab or a local makerspace. (Alternate Video Link)
Transportation

Video It's Not a Car, It's a Self-Balancing Electric Motorcycle (Video) 218

Posted by Roblimo from the two-wheels-good-four-wheels-bad dept.
Two gyros under the seat keep this vehicle standing up at a stop, which is easier on the driver's legs than putting a foot down the way you do while riding most motorcycles. And no vroom-vroom sound, either. This is an electric motorcycle. The prototype you see in the video gets up to around 20 MPH, but production models are supposed to hit 100 MPH, and go as far as a Tesla S on 1/6 the juice. So little tiny batteries are all the Lit C-1 needs to drive (up to) 200 miles with the gyros spinning merrily away -- keeping the C-1 upright even in crashes, as a simulation in this Lit Motors YouTube video shows. They claim to have more than 200 pre-orders against a projected retail price of $24,000, which is not shabby for a company that hasn't made a single production vehicle so far. (Alternate Video Link)
Technology

Video 3-D Printing with Molten Steel (Video) 104

Posted by Roblimo from the let's-get-together-this-weekend-and-melt-some-steel dept.
Steve Delaire is making a 3-D printer that uses steel instead of plastic. Specifically, he's using TIG welding to build up layers of steel, just as most 3-D printers build up layers of plastic. He says he's "still working it out," but eventually hopes to use 3-D welding to make larger than life art pieces that are strong enough to be placed safely in public areas such as parks, where children are likely to climb on them. Steve's blog is called Molten3D, and it's a diary of his work, including the problems he encounters and how he overcomes them. He's not the only one doing metal 3-D printing; a Texas company has even made a printed metal gun. So there's plenty of people working in the field of what we really should call "additive manufacturing" instead of "3-D printing." But whatever you call it, every year we see this kind of process being used to make stronger and more complicated shapes, using an ever-increased variety of materials in ways that have been developed since this seminal paper, Liquid Metal Jetting for Printing Metal Parts, was written in 1997. (Alternate Video Link)

Comment Re: Not exactly needed (Score 2) 62

by Roblimo (#47260117) Attached to: A Seriously High Speed Video Camera (Video)

A bowling alley or instructor might be a valid customer for this camera. Too pricey for you or a dozen like you, but spread it out over hundreds of users, it might make sense. Or possibly set up a "sports motion analysis" business that can be at a bowling alley tonight, a golf course tomorrow, a baseball practice facility next week, and so on.
Technology

Video A Seriously High Speed Video Camera (Video) 62

Posted by Roblimo from the there-is-no-such-thing-as-too-much-speed dept.
Mike Matter was showing off his edgertronic (named after Harold Eugene "Doc" Edgerton) high speed video camera at O'Reilly's inaugural Solid conference, when Tim Lord happened by his little show booth and started interviewing Mike with his normal speed camcorder. While Tim's camcorder shoots 720p at 30 or 60 frames per second, the edgertronic video camera shoots 720P at 700 frames per second, and can shoot lesser resolutions at up to 18,000 frames per second. But the big breakthrough here isn't performance. It's price. Most high-speed video cameras cost $20,000 to $50,000 (or even more), while Mike's edgertronic starts at a mere $5,495.00. This is still a little steep for hobby photographers, but is not bad for a tool used by professionals. And Kickstarter? You bet! Last year Mike raised $170,175, which was much more than his $97,900 goal. Now he's busy making and shipping cameras, working so many hours that he doesn't have time for his own photography. But sometimes that's the way life goes, and Mike seems to be handling it well. (Alternate Video Link)

Slashdot Top Deals

A morsel of genuine history is a thing so rare as to be always valuable. -- Thomas Jefferson

Close