Our headline is the title of a survey SysAid did at Fusion, a "gathering of seasoned IT directors, service management implementers, and business analysts" that took place in early November. As Sysaid's marketing VP, Sophie Danby was the person who designed and implemented the survey, which consisted of only three questions: 1) Where do you see the corporate IT department in five years’ time? 2) With the consumerization of IT continuing to drive employee expectations of corporate IT, how will this potentially disrupt the way companies deliver IT? 3) What IT process or activity is the most important in creating superior user experiences to boost user/customer satisfaction? || You can obviously follow the first link above and see the survey's results. But in the video, Sophie adds some insights beyond the numerical survey results into near-future IT changes and what they mean for people currently working in the field.

An anonymous reader points out this article about Dr. James Crowe, who is trying to use the blood of Ebola survivors to develop a cure. "For months, Vanderbilt University researcher Dr. James Crowe has been desperately seeking access to the blood of U.S. Ebola survivors, hoping to extract the proteins that helped them overcome the deadly virus for use in new, potent drugs. His efforts finally paid off in mid-November with a donation from Dr. Rick Sacra, a University of Massachusetts physician who contracted Ebola while working in Liberia. The donation puts Crowe at the forefront of a new model for fighting the virus, now responsible for the worst known outbreak in West Africa that has killed nearly 7,000 people. Crowe is working with privately-held drugmaker Mapp Biopharmaceutical Inc, which he said will manufacture the antibodies for further testing under a National Institutes of Health grant. Mapp is currently testing its own drug ZMapp, a cocktail of three antibodies that has shown promise in treating a handful of Ebola patients."

Alek Komarnitsky, Colorado (and the Internet's) own Clark Griswold, has decided to retire as his own props master, programmer, best boy, and effects specialist. After 10 years of increasingly elaborate set-ups, Alek's decided to go out with a bang, with his largest-yet rooftop display of open-source powered, remotely controllable, internet-connected Christmas lights. (This year, he even matches the fictional Griswold's 25,000 lights, but truth tops fiction, with live webcams, animated props, and more.) We talked with Alek last year, too; but now he's got a full decade's worth of reminiscing about his jest-made-real hobby as That Guy With the Lights, and some advice for anyone who'd like to take on a project like this.

Alek has managed to stay on good terms with his neighbors, despite the car and foot traffic that his display has drawn, and kept himself from serious harm despite a complex of minor, overlapping risks including ladders, squirrels, a fair amount of electricity and (the most dangerous, he says) wind. The lights are what the world sees, but the video capture and distribution to the vast online audience is an equal part of the work. Alek has learned a lot along the way about automation, logistics, wireless networking, and the importance of load balancing. It's always possible the lights will return in some form, or that someone will take up the mantle as Blinkenlights master, but this tail end of 2014 (and the first day of 2015) is your last good chance to tune in and help toggle some of those lights. (The display operates from 1700-2200 Mountain time.) Alternate Video Link Update: 12/22 22:50 GMT by T : Note: Alek talks about the last year here.

Their website says, 'Come for the code, stay for the people! We have awesome attendees and electrifying parties. Check out the robotics club, the automated home brewing system running on Linux, or the game room for extra conference fun.' This is an all-volunteer conference, and for a change the volunteers who run it are getting things together far in advance instead of having sessions that don't get scheduled until a few days before the conference, which has happened more than once with LFNW.

So if you have an idea for a session, this is the time to start thinking about it. Sponsors are also welcome -- and since LFNW sponsorships regularly sell out, it's not to soon to start thinking about becoming a sponsor -- and if you are part of a non-profit group or FOSS project, LFNW offers free exhibit space because this is a conference that exists for the community, not to make money for a corporate owner. But don't delay. As you can imagine, those free exhibit spots tend to fill up early. (Alternate Video Link)

Yasir Billoo, an attorney with Golden & Grimes in Miami, Florida, is licensed to practice law in both Florida and California, and works heavily in the areas of business/commercial law, employment and labor, and civil appeals. Yasir also has a business-oriented blog titled Small Business Law.

In this Slashdot video interview hosted by Timothy Lord, Yasir gives what is essentially a primer on the law behind Non-Disclosure Agreements (NDAs) and how they differ from Non-Competes. Sooner or later you're going to encounter -- or even write -- an NDA, and you'd better know the law behind what you're doing. Naturally, today's interview isn't specific legal advice about a particular situation. If you want that, you need to hire a lawyer to advise you. But Yasir (a long-time Slashdot reader. BTW) has shared enough knowledge in this interview that it will help you deal with many NDA situations on your own, and how to tell when you really should have a lawyer by your side.

Earlier this week we ran two videos about the Vintage Radio and Communications Museum of Connecticut. Their site says, "Our volunteers are happy to give personal tours," and that's what today's videos (and the two we already ran) are: personal tours of the museum conducted by volunteer Bernie Michaels, known in ham radio circles as W2LFV. And for extra fun, after we ran out of video time we added some bonus transcript material for those who remember things like Sams Photofacts. (Alternate Video Link 1 - Alternate Video Link 2)

"Welcome to the Vintage Radio and Communications Museum of Connecticut," is the headline on the museum's website. The site also says, "Our volunteers are happy to give personal tours," and that's what today's two videos (and two more we'll run tomorrow or later in the week) are: personal tours of the museum conducted by volunteer Bernie Michaels, known in ham radio circles as W2LFV. (Alternate Video Link 1) (Alternate Video Link 2)

You can spend less than $500 if you like. That's the maximum amount allowed if you're competing in the Power Racing Series. Interviewee Josh Lee is a member of the Southern Polytechnic State University Electric Vehicle Team. The modified electric 'ride on' toy they showed off and raced at Maker Faire Atlanta (where this video was made) is just one of their many projects. And, obviously, they're just one of many 'slightly deranged' teams involved in learning about and building electric vehicles. (Alternate Video Link)

EVChallenge is a high school student project that converts gas cars to electric. This isn't a "someday" thing. It's already happening, and Ben has worked hard to make it so in N. Carolina. There are other people around the world doing EVChallenge, and Ben does a number of things besides EVChallenge. His Kickstarter project, for instance, was called Help Bring Back Quality Science Kits (STEM Education). It closed on October 17 after 119 backers came through with $6523, which was a lot more than Ben's modest $3500 goal. This takes us to Ben's EVChallenge simulator itself, which is a simple "breadboard" simulation of the circuitry that drives an electric car so students can learn EV (electric vehicle) principles before they work on the real thing.

This is all part of the Harris Educational effort to make science teaching fun and interesting, not just with electric cars and simulations of their circuitry, but with other kits and even training services. As Ben's Training Services page says, "Harris Educational can provide face-to-face or online training for individuals, small groups, or companies. We can also help you design and implement your own training programs." So besides the video interview here, please look at Ben's pages, this article about his work, and check some of the videos on his assorted pages. It's good stuff, especially if you have (or plan to have) kids in high school. (Alternate Video Link)

A bit of housing insulation material, a battery, a motor and propellor, a radio receiver and transmitter, and servos to control the motor and a pair of ailerons, and you're ready to fly the Brooklyn Aerodrome way. This isn't a tiny radio-controlled paper airplane, but a big bruiser with a 1:1 power to weight ratio (which means it can climb like a bat out of hell) and enough guts to fly in reasonably windy conditions while carrying a camera -- except we'd better not mention cameras, since Brooklyn Aerodrome creations, whether kits or plans, are obviously intended tohelp you build model airplanes, not drones. Timothy ran into project proponent Breck Baldwin at a maker faire near Atlanta, surrounded by a squadron of junior pilots who may someday become astronauts on the Moon - Mars run -- or at least delivery drone controllers for Amazon. (Alternate Video Link)

Dan Mcculley, the interviewee in this video, works for Intel and claims they have "about 140" projects going on inside their fabs and factories, of which the Smart Toolbox is but one, and it's one some technicians came up with because Intel workers lose something like $35,000 worth of tools every year. This project is based on the same Galileo boards Intel has used to support some high-altitude balloon launches -- except this is an extremely simple, practical application. Open source? You bet! And Dan says the sensors and other parts are all off-the-shelf items anyone can buy. (Alternate Video Link)

Yesterday we ran video #1 of 2 about the Critical Materials Institute (CMI) at the Iowa State Ames Laboratory in Ames, Iowa. They have partners from other national laboratories, universities, and industry, too. Obviously there is more than enough information on this subject that Dr. King can easily fill two 15-minute videos, not to mention so many Google links that instead of trying to list all of them, we're giving you one link to Google using the search term "rare earths." Yes, we know Rare Earth would be a great name for a rock band. But the mineral rare earths are important in the manufacture of items ranging from strong magnets to touch screens and rechargeable batteries, so please watch the video(s) or at least read the transcript(s). (Alternate Video Link)